--5mCyUwZo2JvN/JJP
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable

Hi,=20

On Tue, Nov 25, 2003 at 12:05:56PM +0100, Paul Kranenburg wrote:
>   sd2 at scsibus0 target 2 lun 0: <SEAGATE, ST12400N SUN2.1G, 8720> disk =
fixed
>   sd2(esp0:0:2:0):  Check Condition on CDB: 0x00 00 00 00 00 00
>       SENSE KEY:  Not Ready
>        ASC/ASCQ:  Logical Unit Not Ready, Initialization Command Required
>        FRU CODE:  0x1
>=20
>   sd2: drive offline
>   sd2: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers, tagged que=
ueing
>=20
> When first accessed after the boot is completed, e.g. by disklabel(8),
> the drive is spun up and everything is fine.
>=20
> Is this verbosity intended?

Sounds to me like the default handling of the driver. You'd have to special
case it to suppress this particular error in this particular situation -=20
because all SCSI errors are reported to the console, I think.

Regards,
	Ignatios

--5mCyUwZo2JvN/JJP
Content-Type: application/pgp-signature
Content-Disposition: inline

-----BEGIN PGP SIGNATURE-----
Version: 2.6.i

iQEVAgUBP8NFKTCn4om+4LhpAQGtTAgAnp24WQqKJsVywXKUw8VpoChY4t7UvsU1
NTknBkcDkZXHH3spwWvPpaIPSKzWsrY9qp6f+aDI/UEpx4cfOQyxCRnnPcBI+FS4
arxWXAJdhnze3fO131bFVjbh9IXnr4l0UTBwjpKK8/GPvjCulA6txjRUvna1JLR8
joqrAb8YdAwqFMwXbIyKT8v8KyyY8LfBQ0LwYfQ/TtzA8hcqV7chVVguy40JBku+
AElMM+4pQ/4+aItjQWIxpds4k221WjzA0bPV6ArqkuSWBiMY7nk4XZ5RkjuikRxD
yPcl0HZJ83hqNAg52HaTWuHTEmAspclCLK5wmBJ9VCgBXsxCWN6P8A==
=Rsve
-----END PGP SIGNATURE-----

--5mCyUwZo2JvN/JJP--