--Boundary-00=_FqlSGccNeyl8kpK
Content-Type: text/plain;
  charset="utf-8"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

G'day,

I've built a custom kernel after noticing a swag of new commits for the azalia 
driver in order to test whether it supports audio input. I still can't get it 
to work on a Dell Inspiron 9400 laptop which uses a Sigmatel STAC9200. Has 
anyone else got it to work?

Sysinfo:
NetBSD barossa 4.99.19 NetBSD 4.99.19 (BAROSSA) #4: Sun May 13 20:16:29 CST 
2007  wulf@barossa:/sys/arch/i386/compile/BAROSSA i386

I've attached the output of dmesg, audioctl and mixerctl.

Any help is greatly appreciated.

cheerio Berndt

--Boundary-00=_FqlSGccNeyl8kpK
Content-Type: text/x-log;
  charset="utf-8";
  name="dmesg.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="dmesg.log"

ermal monitor 1
cpu0: Enhanced SpeedStep (1404 mV) 2000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 2000 1000
cpu0: calibrating local timer
cpu0: apic clock running at 166 MHz
cpu0: 64 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: Intel Pentium M (Yonah) (686-class), 1995.00 MHz, id 0x6e8
cpu1: features bfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfe9fbff<PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX>
cpu1: features bfe9fbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 c1a9<SSE3,MONITOR,VMX,EST,TM2,xTPR>
cpu1: "Genuine Intel(R) CPU           T2500  @ 2.00GHz"
cpu1: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu1: L2 cache 2 MB 64B/line 8-way
cpu1: using thermal monitor 1
ioapic0 at mainbus0 apid 2
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <DELL  , M07    ,27d70402>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
pnp0c14 at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
pckbc0 at acpi0 (PNP0F13): aux port
pckbc0: irq 12
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64,0x62,0x66 irq 1
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43,0x50-0x53 irq 2
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
PNP0C01 [System Board] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
hpet0 at acpi0 (PNP0103)
hpet0: mem 0xfed00000-0xfed003ff
hpet0: Found 64-bits HPET, will only use lowest 32-bits
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 126.0C
apm0 at acpi0: Power Management spec V1.2
acpiacad0: AC adapter online.
acpibat0: battery info: Sanyo, LION, DELL C54476, 772
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82945GM/PM/GMS Host Bridge (rev. 0x03)
agp0 at pchb0: can't find internal VGA device config space
ppb0 at pci0 dev 1 function 0: Intel product 0x27a1 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci1 dev 0 function 0: ATI Technologies product 0x7145 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 21 (irq 11)
azalia0: host: Intel 82801GB/GR High Definition Audio Controller (rev. 1)
azalia0: host: High Definition Audio rev. 1.0
azalia0: host: 4 output, 4 input, and 0 bidi streams
azalia_attach: resetting
azalia_attach: reset counter = 5000
azalia_attach: reset counter = 4985
azalia0: found a codec at #0
azalia0: found a codec at #1
ppb1 at pci0 dev 28 function 0: Intel 82801GB/GR PCI Express Port #1 (rev. 0x01)
pci2 at ppb1 bus 11
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 1: Intel 82801GB/GR PCI Express Port #2 (rev. 0x01)
pci3 at ppb2 bus 12
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wpi0 at pci3 dev 0 function 0: Intel PRO/Wireless LAN 3945ABG Mini-PCI Adapter (rev. 0x02)
wpi0: interrupting at ioapic0 pin 17 (irq 5)
wpi0: 802.11 address 00:13:02:9c:e3:ba
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ppb3 at pci0 dev 28 function 3: Intel 82801GB/GR PCI Express Port #4 (rev. 0x01)
pci4 at ppb3 bus 13
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci0: interrupting at ioapic0 pin 20 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci2: interrupting at ioapic0 pin 22 (irq 9)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: Intel 82801GB/GR USB UHCI Controller (rev. 0x01)
uhci3: interrupting at ioapic0 pin 23 (irq 7)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801GB/GR USB EHCI Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 20 (irq 10)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xe1)
pci5 at ppb4 bus 3
pci5: i/o space, memory space enabled
bce0 at pci5 dev 0 function 0: Broadcom BCM4401-B0 10/100 Ethernet
bce0: interrupting at ioapic0 pin 17 (irq 5)
bmtphy0 at bce0 phy 1: BCM4401 10/100 media interface, rev. 0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bce0: Ethernet address 00:14:22:f7:28:8e
fwohci0 at pci5 dev 1 function 0: Ricoh product 0x0832 (rev. 0x00)
fwohci0: interrupting at ioapic0 pin 19 (irq 3)
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 47:4f:c0:00:19:8e:44:38
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Ricoh product 0x0822 (SD Host Controller system, interface 0x01, revision 0x19) at pci5 dev 1 function 1 not configured
Ricoh product 0x0843 (miscellaneous system, revision 0x01) at pci5 dev 1 function 2 not configured
Ricoh product 0x0592 (miscellaneous system, revision 0x0a) at pci5 dev 1 function 3 not configured
Ricoh product 0x0852 (miscellaneous system, revision 0x05) at pci5 dev 1 function 4 not configured
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801GBM LPC Interface Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801GBM/GHM Serial ATA Controller (ICH7) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
Intel 82801GB/GR SMBus Controller (SMBus serial bus, revision 0x01) at pci0 dev 31 function 3 not configured
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia_init_corb: CORB allocation succeeded.
azalia_init_corb: CORBWP=0; size=256
azalia_init_rirb: RIRB allocation succeeded.
azalia_init_rirb: RIRBRP=0, size=256
azalia0: information of codec[0] follows:
azalia_codec_init_vtbl: vid=83847690 subid=01cd1028
azalia0: codec[0]: Sigmatel STAC9200 (rev. 34.1)
azalia0: codec[0]: High Definition Audio rev. 1.0
azalia_codec_init: nidstart=1 #functions=1
azalia_codec_init: FTYPE result = 0x00000101
azalia_codec_init: There are 19 widgets in the audio function.
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    inamp: mute=0 size=0 steps=0 offset=0
azalia0:    outamp: mute=1 size=5 steps=31 offset=31
azalia0: dac02 wcap=d0401<POWER,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: adc03 wcap=1d0541<POWER,CONNLIST,PROC,STEREO>
azalia0:    encodings=1<PCM>
azalia0:    PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0:    connections=0xa; selected=0xa
azalia0: adc04 wcap=140311<DIGITAL,CONNLIST,FORMATOV,STEREO>
azalia0:    encodings=5<AC3,PCM>
azalia0:    PCM formats=e0160<24bit,20bit,16bit,96kHz,48kHz,44.1kHz>
azalia0:    connections=0x8; selected=0x8
azalia0: dac05 wcap=40211<DIGITAL,FORMATOV,STEREO>
azalia0:    encodings=5<AC3,PCM>
azalia0:    PCM formats=e01e0<24bit,20bit,16bit,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: widget06 wcap=f30201<DIGITAL,STEREO>
azalia0: sel07 wcap=300901<LRSWAP,CONNLIST,STEREO>
azalia0:    connections=0x2,0x8,0xa; selected=0x2
azalia0: unknown08 wcap=430681<POWER,DIGITAL,UNSOL,STEREO>
azalia0:    pin config; device=other color=unknown assoc=15 seq=0 cap=10024<EAPD,INPUT,PRESENCE>
azalia0: unknown09 wcap=400301<DIGITAL,CONNLIST,STEREO>
azalia0:    pin config; device=other color=unknown assoc=15 seq=1 cap=10<OUTPUT>
azalia0:    connections=0x5,0xa; selected=0x5
azalia0: sel0a wcap=30090d<LRSWAP,CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0xc; selected=0xc
azalia0:    outamp: mute=1 size=5 steps=15 offset=0
azalia0: sel0b wcap=300105<CONNLIST,OUTAMP,STEREO>
azalia0:    connections=0x7; selected=0x7
azalia0:    outamp: mute=1 size=5 steps=31 offset=31
azalia0: sel0c wcap=30010d<CONNLIST,AMPOV,OUTAMP,STEREO>
azalia0:    connections=0x10,0xf,0xe,0xd,0x12; selected=0x10
azalia0:    outamp: mute=0 size=39 steps=4 offset=0
azalia0: black0d wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=headphones color=black assoc=1 seq=15 cap=3f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0xb; selected=0xb
azalia0: unknown0e wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=speaker color=unknown assoc=1 seq=0 cap=3f<INPUT,OUTPUT,HEADPHONE,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0xb; selected=0xb
azalia0: unknown0f wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=other color=unknown assoc=15 seq=2 cap=37<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0xb; selected=0xb
azalia0: black10 wcap=400181<CONNLIST,UNSOL,STEREO>
azalia0:    pin config; device=mic color=black assoc=2 seq=0 cap=1737<INPUT,OUTPUT,PRESENCE,TRIGGER,IMPEDANCE>
azalia0:    connections=0xb; selected=0xb
azalia0: unknown11 wcap=400104<CONNLIST,OUTAMP>
azalia0:    pin config; device=other color=unknown assoc=15 seq=3 cap=10<OUTPUT>
azalia0:    connections=0x13; selected=0x13
azalia0:    outamp: mute=1 size=5 steps=31 offset=31
azalia0: unknown12 wcap=400001<STEREO>
azalia0:    pin config; device=other color=unknown assoc=15 seq=4 cap=20<INPUT>
azalia0: mix13 wcap=200100<CONNLIST>
azalia0:    connections=0x7; selected=0x7
azalia0: beep14 wcap=70000c<AMPOV,OUTAMP>
azalia0:    outamp: mute=1 size=23 steps=3 offset=3
generic_codec_find_dac: DAC: nid=0x2 index=2
generic_codec_find_dac: DAC path: nid=0x7 index=7
generic_codec_find_dac: DAC path: nid=0xb index=11
generic_codec_find_dac: DAC path: nid=0xe index=14
generic_codec_add_dacgroup: assoc=1 seq=0 ==> g=0 n=0
generic_codec_find_dac: DAC: nid=0x2 index=2
generic_codec_find_dac: DAC path: nid=0x7 index=7
generic_codec_find_dac: DAC path: nid=0xb index=11
generic_codec_find_dac: DAC path: nid=0x10 index=16
generic_codec_add_dacgroup: assoc=2 seq=0 ==> g=1 n=0
generic_codec_init_dacgroup: find non-connected DACs
azalia_codec_init: dacgroup[0]: 02
azalia_codec_init: dacgroup[1]: 05
azalia0: playback: max channels=2, encodings=1<PCM>
azalia0: playback: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
azalia0: recording: max channels=2, encodings=1<PCM>
azalia0: recording: PCM formats=e07e0<24bit,20bit,16bit,192kHz,176.4kHz,96kHz,88.2kHz,48kHz,44.1kHz>
generic_mixer_default: unmute
generic_mixer_default: process bidirectional pins
generic_mixer_default: set volume
azalia0: information of codec[1] follows:
azalia_codec_init_vtbl: vid=14f12bfa subid=01cd1028
azalia0: codec[1]: 0x14f1/0x2bfa (rev. 0.0)
azalia0: codec[1]: High Definition Audio rev. 0.9
azalia_codec_init: nidstart=2 #functions=1
azalia_codec_init: FTYPE result = 0x00000102
azalia0: codec[1]: No support for modem function groups
azalia0: codec[1] has no audio function groups
azalia0: using the #0 codec
audio0 at azalia0: full duplex, independent
azalia_round_blocksize: resultant block size = 9600
azalia_round_blocksize: resultant block size = 9600
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <FUJITSU MHV2100BH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 93958 MB, 190899 cyl, 16 head, 63 sec, 512 bytes/sect x 192426570 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <_NEC DVD+/-RW ND-6650A, , 102C> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub4: device problem, disabling port 1
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
/dev/wd0l: file system not clean; please fsck(8)
azalia_open: flags=0x1
azalia_round_blocksize: resultant block size = 9600
azalia_round_blocksize: resultant block size = 9600
azalia_round_blocksize: resultant block size = 9600
azalia_round_blocksize: resultant block size = 9600
azalia_trigger_input: this=0xc2018000 start=0xcbd77000 end=0xcbd85100 blk=9600 {enc=6 2ch 16/16bit 48000Hz}
azalia_codec_connect_stream: fmt=0x0011 number=2
azalia_codec_connect_stream: leave with 0
azalia_halt_input
azalia_close

--Boundary-00=_FqlSGccNeyl8kpK
Content-Type: text/x-log;
  charset="utf-8";
  name="audioctl.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="audioctl.log"

name=HD-Audio
version=1.0
config=azalia0
encodings=slinear_le:16,slinear_be:16*,ulinear_le:16*,ulinear_be:16*,mulaw:8*,alaw:8*,slinear_le:32,slinear_be:32*,ulinear_le:32*,ulinear_be:32*
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=9600
hiwat=6
lowat=5
monitor_gain=0
mode=
play.rate=8000
play.channels=1
play.precision=8
play.encoding=mulaw
play.gain=32
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
record.rate=8000
record.channels=1
record.precision=8
record.encoding=mulaw
record.gain=127
record.balance=32
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.errors=0

--Boundary-00=_FqlSGccNeyl8kpK
Content-Type: text/x-log;
  charset="utf-8";
  name="mixerctl.log"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
	filename="mixerctl.log"

outputs.source=dac
outputs.spdif.source=dac
outputs.selector.mute=off
outputs.selector=119,119
outputs.master.mute=off
outputs.master=32,32
inputs.selector.source=mic1
outputs.headphones.boost=off
outputs.speaker.boost=off
outputs.mono.mute=off
outputs.mono=123
outputs.beep.mute=off
outputs.beep=85
playback.mode=analog
record.mode=analog

--Boundary-00=_FqlSGccNeyl8kpK--