tech-kern archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: Fwd: getting NetBSD 4.0 console on alix1c
On Mon, Feb 04, 2008 at 10:31:23PM +0100, Joerg Sonnenberger wrote:
>On Mon, Feb 04, 2008 at 04:39:52PM -0500, George Georgalis wrote:
>> Would you like me to cycle the power with ps/2 or usb installed?
>
>Yes, please try with the PS/2 keyboard plugged in at boot time.
>If it still doesn't show IRQ 1 listed, that is the problem -- it is not
>getting interrupts for the device.
I do get irq 1 when booting with ps2 installed, nb:
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: unable to establish interrupt for aux slot
wsmouse0 at pms0 mux 0
however, keystrokes do not reach getty. Below is vmstat -i, ps ax
and dmesg, from boot with ps/2 keyboard attached. I would guess
this is a bug related to no second mouse ps/2 port available?
// George
interrupt total rate
cpu0 softclock 4653 103
cpu0 softnet 49 1
pic0 pin 5 94 2
pic0 pin 14 2802 62
pic0 pin 0 4812 106
Total 12410 275
interrupt total rate
cpu0 softclock 5146 102
cpu0 softnet 64 1
pic0 pin 1 10 0
pic0 pin 5 120 2
pic0 pin 14 2848 56
pic0 pin 0 5305 106
Total 13493 269
PID TTY STAT TIME COMMAND
0 ? DKs 0:00.00 [swapper]
1 ? Is 0:00.01 init
2 ? DK 0:00.00 [sysmon]
3 ? DK 0:00.00 [pms0]
4 ? DK 0:00.00 [cryptoret]
5 ? DK 0:00.00 [atabus0]
6 ? DK 0:00.00 [usb0]
7 ? DK 0:00.00 [usbtask-hc]
8 ? DK 0:00.00 [usbtask-dr]
9 ? DK 0:00.00 [usb1]
10 ? DK 0:00.00 [pagedaemon]
11 ? DK 0:00.04 [ioflush]
12 ? DK 0:00.01 [aiodoned]
48 ? DK 0:00.00 [physiod]
206 ? Is 0:00.00 dhclient wm0
313 ? Is 0:00.02 mount_mfs -s 132048 swap /tmp
495 ? Ss 0:00.09 /usr/sbin/ntpd
511 ? Is 0:00.01 /usr/sbin/sshd
529 ? Is 0:00.00 /usr/sbin/cron
566 ? Ss 0:00.12 sshd: root@ttyp0
574 ttyp0 Ss 0:00.04 -ksh
692 ttyp0 R+ 0:00.00 ps -ax
509 ttyE0 Is+ 0:00.01 /usr/libexec/getty Pc console
539 ttyE1 Is+ 0:00.01 /usr/libexec/getty Pc ttyE1
533 ttyE2 Is+ 0:00.01 /usr/libexec/getty Pc ttyE2
540 ttyE3 Is+ 0:00.01 /usr/libexec/getty Pc ttyE3
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.0 (GENERIC) #0: Sun Dec 16 00:20:10 PST 2007
builds@wb34:/home/builds/ab/netbsd-4-0-RELEASE/i386/200712160005Z-obj/home/builds/ab/netbsd-4-0-RELEASE/src/sys/arch/i386/compile/GENERIC
total memory = 247 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 232 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfa960
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Geode LX (586-class), 498.08 MHz, id 0x5a2
cpu0: features 88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP>
cpu0: features 88a93d<PGE,CMOV,MPC,MMX>
cpu0: "Geode(TM) Integrated Processor by AMD PCS"
cpu0: I-cache 64 KB 32B/line 16-way, D-cache 64 KB 32B/line 16-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 16 4 KB entries fully associative
cpu0: DTLB 16 4 KB entries fully associative
cpu0: 8 page colors
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <AMDGX3,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 32-bit timer
mpacpi: could not get bus number, assuming bus 0
LNKC: ACPI: Found matching pin for 0.12.INTA at func 0: 5
LNKD: ACPI: Found matching pin for 0.12.INTB at func 1: 10
LNKB: ACPI: Found matching pin for 0.13.INTA at func 0: 11
LNKA: ACPI: Found matching pin for 0.1.INTA at func 1: 11
LNKB: ACPI: Found matching pin for 0.15.INTB at func 3: 11
LNKD: ACPI: Found matching pin for 0.15.INTD at func 4: 10
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0400 [Standard LPT printer port] at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: unable to establish interrupt for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0
pchb0: Advanced Micro Devices Geode LX Host-PCI Bridge (rev. 0x31)
vga1 at pci0 dev 1 function 1: Advanced Micro Devices Geode LX VGA Controller
(rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
glxsb0 at pci0 dev 1 function 2: RNG AES
wm0 at pci0 dev 12 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm0: interrupting at irq 5
wm0: 32-bit 33MHz PCI bus
wm0: 256 word (8 address bits) MicroWire EEPROM
wm0: Ethernet address 00:07:e9:0a:9a:78
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
wm1 at pci0 dev 12 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm1: interrupting at irq 10
wm1: 32-bit 33MHz PCI bus
wm1: 256 word (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:07:e9:0a:9a:79
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
vr0 at pci0 dev 13 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:0d:b9:0c:df:48
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 15 function 0
pcib0: Advanced Micro Devices CS5536 PCI-ISA Bridge (rev. 0x03)
viaide0 at pci0 dev 15 function 2
viaide0: Advanced Micro Devices CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
Advanced Micro Devices product 0x2093 (audio multimedia, revision 0x01) at pci0
dev 15 function 3 not configured
ohci0 at pci0 dev 15 function 4: Advanced Micro Devices CS5536 OHCI USB
Controller (rev. 0x02)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 15 function 5: Advanced Micro Devices CS5536 EHCI USB
Controller (rev. 0x02)
ehci0: interrupting at irq 10
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Advanced Micro Devices EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <Hitachi XX.V.3.3.0.0>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4
wd0(viaide0:0:0): using PIO mode 4
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
--
George Georgalis, information system scientist <IXOYE><
Home |
Main Index |
Thread Index |
Old Index