Dell 1850 nics fail

To: <tech-kern%netbsd.org@localhost>
Subject: Dell 1850 nics fail
From: peter eisch <peterbokunet%hotmail.com@localhost>
Date: Fri, 23 Oct 2009 11:09:22 -0500

Hi,
 
I found kern/41910 with no further comments.  Is there anything I can do to add 
to the ticket to help?  What's interesting is that it is possible to get one 
nic to work so long as it's in the second (100MHz) slot.  None of the others 
will pass data.  Yes, the hardware works well with other OS'.
 
Ideas I can try to get them [all] to work?  I can ship a system to someone who 
can help with this (preferably North America).  I can alternatively get 
network/serial console access to one remotely (it has the DRAC so you can 
reboot it remotely as well).  I might be adept at providing suitable info if I 
knew what info might be useful.
 
peter
 
(PETER-FW kernel is GENERIC plus buffer increases)
 
NetBSD 5.0.1_PATCH (PETER-FW) #0: Tue Oct 13 21:09:11 CDT 2009
        
peter@buster:/builds/netbsd-5-0/i386/obj/builds/netbsd-5-0/src/sys/arch/i386/compile/PETER-FW
total memory = 1023 MB
avail memory = 993 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation PowerEdge 1850
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 2992MHz, id 0xf4a
cpu1 at mainbus0 apid 6: Intel 686-class, 2992MHz, id 0xf4a
cpu2 at mainbus0 apid 1: Intel 686-class, 2992MHz, id 0xf4a
cpu3 at mainbus0 apid 7: Intel 686-class, 2992MHz, id 0xf4a
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9: pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0 apid 10: pa 0xfec83000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <DELL  ,PE BKC  ,00000001>, AslId <MSFT,0100000a>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pcppi1 at acpi0 (SPK, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x5f irq 0
FDC (PNP0700) at acpi0 not configured
COMA (PNP0501) at acpi0 not configured
NIPM (IPI0001) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103-0)
hpet0: mem 0xfed00000-0xfed003ff
timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
ipmi0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x3590 (rev. 0x09)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x3595 (rev. 0x09)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x0330 (rev. 0x06)
ppb1: disabling notification events
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci2 dev 12 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm0: interrupting at ioapic0 pin 16
wm0: 64-bit 100MHz PCIX bus
wm0: 256 word (8 address bits) MicroWire EEPROM
wm0: Ethernet address 00:04:23:e1:a3:b2
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm1 at pci2 dev 12 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm1: interrupting at ioapic0 pin 17
wm1: 64-bit 100MHz PCIX bus
wm1: 256 word (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:04:23:e1:a3:b3
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
amr0 at pci2 dev 14 function 0: AMI RAID <PERC 4e/Si>
amr0: interrupting at ioapic0 pin 18
amr0: firmware 5B2D, BIOS H435, 256MB RAM
ld0 at amr0 unit 0: RAID 1, optimal
ld0: 69880 MB, 8908 cyl, 255 head, 63 sec, 512 bytes/sect x 143114240 sectors
ppb2 at pci1 dev 0 function 2: vendor 0x8086 product 0x0332 (rev. 0x06)
ppb2: disabling notification events
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
wm2 at pci3 dev 11 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm2: interrupting at ioapic0 pin 19
wm2: 64-bit 133MHz PCIX bus
wm2: 256 word (8 address bits) MicroWire EEPROM
wm2: Ethernet address 00:04:23:e0:8b:46
makphy2 at wm2 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
wm3 at pci3 dev 11 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm3: interrupting at ioapic0 pin 16
wm3: 64-bit 133MHz PCIX bus
wm3: 256 word (8 address bits) MicroWire EEPROM
wm3: Ethernet address 00:04:23:e0:8b:47
makphy3 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb3 at pci0 dev 4 function 0: vendor 0x8086 product 0x3597 (rev. 0x09)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 5 function 0: vendor 0x8086 product 0x3598 (rev. 0x09)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci5 dev 0 function 0: vendor 0x8086 product 0x0329 (rev. 0x09)
ppb5: disabling notification events
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
wm4 at pci6 dev 7 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm4: interrupting at ioapic2 pin 0
wm4: 32-bit 66MHz PCI bus
wm4: 65536 word (16 address bits) SPI EEPROM
wm4: Ethernet address 00:14:22:14:74:e0
igphy0 at wm4 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, 1000baseT, 
1000baseT-FDX, auto
ppb6 at pci5 dev 0 function 2: vendor 0x8086 product 0x032a (rev. 0x09)
ppb6: disabling notification events
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
wm5 at pci7 dev 8 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm5: interrupting at ioapic2 pin 1
wm5: 32-bit 66MHz PCI bus
wm5: 65536 word (16 address bits) SPI EEPROM
wm5: Ethernet address 00:14:22:14:74:e1
igphy1 at wm5 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
ppb7 at pci0 dev 6 function 0: vendor 0x8086 product 0x3599 (rev. 0x09)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24d2 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24d4 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24d7 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24dd (rev. 0x02)
ehci0: interrupting at ioapic0 pin 23
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb8 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xc2)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled
vendor 0x1028 product 0x0011 (undefined subclass 0x00) at pci9 dev 5 function 0 
not configured
vendor 0x1028 product 0x0012 (undefined subclass 0x00) at pci9 dev 5 function 1 
not configured
vendor 0x1028 product 0x0014 (undefined subclass 0x00) at pci9 dev 5 function 2 
not configured
cmdide0 at pci9 dev 6 function 0
cmdide0: Silicon Image 0680 (rev. 0x02)
cmdide0: bus-master DMA support present
cmdide0: primary channel wired to native-PCI mode
cmdide0: using ioapic0 pin 23 for native-PCI interrupt
atabus0 at cmdide0 channel 0
cmdide0: secondary channel wired to native-PCI mode
atabus1 at cmdide0 channel 1
vga1 at pci9 dev 13 function 0: vendor 0x1002 product 0x5159 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
ichlpcib0 at pci0 dev 31 function 0
ichlpcib0: vendor 0x8086 product 0x24d0 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus2 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus3 at piixide0 channel 1
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2992811100 Hz quality 3000
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
atapibus0 at atabus0: 2 targets
IPsec: Initialized Security Association Processing.
sd0 at atapibus0 drive 0: <VIRTUALFLOPPY DRIVE               Flopp, ,> disk 
removable
sd0: drive offline
sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present
 
sd0: unable to open device, error = 19
sd0: 32-bit data port
sd0: drive supports PIO mode 3
cd0 at atapibus0 drive 1: <VIRTUALCDROM DRIVE, ,> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3
sd0(cmdide0:0:0): using PIO mode 3
cd0(cmdide0:0:1): using PIO mode 3
atapibus1 at atabus2: 2 targets
cd1 at atapibus1 drive 0: <HL-DT-ST  GCR-8240N, , 1.06> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub4 at uhub3 port 3: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, 
addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0 mux 1
wskbd0: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
ipmi0: version 1.5 interface KCS iobase 0xca8/8 spacing 4
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present
 
sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present
 
sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present
 
sd0(cmdide0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present
 
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)                             
          
_________________________________________________________________
Windows 7: Simplify your PC. Learn more.
http://www.microsoft.com/Windows/windows-7/default.aspx?ocid=PID24727::T:WLMTAGL:ON:WL:en-US:WWL_WIN_evergreen1:102009
Follow-Ups:
- Re: Dell 1850 nics fail
  - From: Joerg Sonnenberger
- Re: Dell 1850 nics fail
  - From: Manuel Bouyer
Prev by Date: Re: panic due to lost vnode flag
Next by Date: Re: Dell 1850 nics fail
Previous by Thread: vnode locking oddities, again
Next by Thread: Re: Dell 1850 nics fail
Indexes:
Home | Main Index | Thread Index | Old Index