Re: wm(4) won't negotiate 1000-base-T with Cisco switches and won't operate with manual media settings

["Brian Buhrow" <buhrow%nfbcal.org@localhost>]

        Hello.  Upon further investigation, I believe I've found my problem
and I believe it exists in the mii layer of our code.  I'm going to
investigate and try to verify my theory before I blather on this list, but
could you send me the output of ifconfig for the device you reference when
its partnered with one or more of the cisco devices you mention?
Specifically, I'm interested to see it linked at 1000baseT, but any output
will be helpful.
-thanks
-Brian


>
> I have:
> wm0 at pci6 dev 7 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
> wm0: interrupting at ioapic2 pin 0
> wm0: 32-bit 66MHz PCI bus
> wm0: 65536 word (16 address bits) SPI EEPROM
> wm0: Ethernet address 00:14:22:19:17:73
> igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
> igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
>
> running netbsd-5. It has no problems negociating gigabit speed with
> a cisco 6000 of some sort, and a cisco 3750G.
>
> --
> Manuel Bouyer <bouyer%antioche.eu.org@localhost>
>      NetBSD: 26 ans d'experience feront toujours la difference
> --
>