Re: Tester(s) needed: ixv(4)

[Masanobu SAITOH <msaitoh%execsw.org@localhost>]

Hi, Bert.

On 2015/08/18 4:09, Bert Kiers wrote:
> On Mon, Aug 17, 2015 at 05:38:09PM +0200, Bert Kiers wrote:
>
> > # uname -a
> > NetBSD  7.99.21 NetBSD 7.99.21 (GENERIC) #0: Mon Aug 17 17:13:23 CEST 2015  kiers%shell.boppelans.net@localhost:/tmp/obj25032/sys/arch/amd64/compile/GENERIC amd64
> >
> > # dmesg|grep ixv
> > ixv0 at pci0 dev 3 function 0: Intel(R) PRO/10GbE Virtual Function Network Driver, Version - 1.1.4
> > ixv0: clearing prefetchable bit
> > ixv0: Using MSIX interrupts with 3 vectors
> > ixv0: for TX/RX, interrupting at msix0 vec 0, bound queue 0 to cpu 0
> > ixv0: for link, interrupting at msix0 vec 1, affinity to cpu 1
> >
> > # ifconfig ixv0
> > ixv0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> > capabilities=bff80<TSO4,IP4CSUM_Rx,IP4CSUM_Tx,TCP4CSUM_Rx,TCP4CSUM_Tx,UD
> > P4CSUM_Rx,UDP4CSUM_Tx,TCP6CSUM_Rx,TCP6CSUM_Tx,UDP6CSUM_Rx,UDP6CSUM_Tx>
> > enabled=0
> > address: 00:00:00:00:00:00
> > media: Ethernet autoselect
> > status: no carrier
> >
> >
> > no carrier is correct at the moment; but no MAC-address :(
>
> After connecting the port to a switch, ifconfig still shows no carrier.
> "ifconfig ixv0 up" does not help.  Doing "ifconfig eth2 up" on the host
> does not help.  It is up on the switch.
>
> Btw, this is with 6.1.5 userland.  I don't think that matters.

 Both MAC address and link status use communication between PF and
VF. I suspect that communication is broken.

--
-----------------------------------------------
                SAITOH Masanobu (msaitoh%execsw.org@localhost
                                 msaitoh%netbsd.org@localhost)