On 12/30/2023 3:42 PM, Johnny Billquist wrote:
On 2023-12-31 00:11, Michael van Elst wrote:Better than 100Hz is possible and still precise. Something around 1000Hzis necessary for human interaction. Modern hardware could easily do 100kHz.? If I remember right, anything less than 200ms is immediate response for a human brain. Which means you can get away with much coarser than even 100Hz. And there are certainly lots of examples of older computers with clocks running in the 10s of ms, where human interaction feels perfect.
I'm not sure about visual and auditory sensation, but haptic VR requires position updates >= 1000Hz to get texture right. The timing of two impulses that close together may not be felt as two separate events, but the frequency of vibrations within the skin when it interacts with a surface (even through a tool, such as a stylus) is encoded by the nerve endings in the skin itself. We used to use PHANTOM haptic arms at $WORK, driven by an Indigo2. If the control loop operated at less than 1000Hz---for example, if the Indigo2 was under load--- it introduced noticeable differences in the sensation of running the pen over a virtual object. The simulation was much more sensitive to that than it was to the timing of the video output, for which anything greater than 72Hz was wasted.
Take care, -Konrad