Re: Running Xorg with a serial console

[Emmanuel Dreyfus <manu%netbsd.org@localhost>]

On Mon, Sep 30, 2024 at 05:48:25PM +0300, Valery Ushakov wrote:
> IIRC, pckbc should not attach port children if the devices are not
> plugged in (you still haven't provided dmesg, btw).

Here it is. This is boot -2 because this machine gets a broken serial 
console with ACPI.

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
    2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
    2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
    2024
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 10.0 (GENERIC) #0: Thu Mar 28 08:33:33 UTC 2024
	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/amd64/compile/GENERIC
total memory = 1950 MB
avail memory = 1859 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (SMCI--MB       SUPERM)
cpu0 at mainbus0 apid 0
ACPI Error: AE_BAD_PARAMETER, Thread 2173217728 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20221020/utmutex-326)
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Celeron(R) CPU G1840 @ 2.80GHz, id 0x306c3
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 2
cpu1: Intel(R) Celeron(R) CPU G1840 @ 2.80GHz, id 0x306c3
cpu1: node 0, package 0, core 1, smt 0
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type PCI   
mpbios: bus 3 is type ISA   
ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 0x20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel Haswell Host Bridge, DRAM (rev. 0x06)
i915drmkms0 at pci0 dev 2 function 0: Intel Haswell Integrated Graphics Device (rev. 0x06)
hdaudio0 at pci0 dev 3 function 0: HD Audio Controller
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 2, ISS 0, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Intel HDMI/DP
hdafg0: DP00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
audio0 at hdafg0: playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
xhci0 at pci0 dev 20 function 0: Intel 8 Series USB xHCI (rev. 0x05)
xhci0: 64-bit DMA
xhci0: interrupting at msi1 vec 0
xhci0: xHCI version 1.0
usb0 at xhci0: USB revision 3.0
usb1 at xhci0: USB revision 2.0
Intel 8 Series MEI Controller (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
wm0 at pci0 dev 25 function 0, 64-bit DMA: I217 V Ethernet Connection (rev. 0x05)
wm0: interrupting at msi2 vec 0
wm0: PCI-Express bus
wm0: 2048 words FLASH, version 0.13.4
wm0: RX packet buffer size: 26KB
wm0: Ethernet address ac:1f:6b:f1:1a:84
wm0: 0x6a4080<FLASH,PCIE,ASF_FIRM,AMT,WOL,EEE>
ihphy0 at wm0 phy 2: i217 10/100/1000 media interface, rev. 4
ihphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci0 at pci0 dev 26 function 0: Intel 8 Series USB EHCI (rev. 0x05)
ehci0: 64-bit DMA
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at msi3 vec 0
hdaudio1: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg1 at hdaudio1: Realtek ALC888
hdafg1: DAC00 2ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: ADC02 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC03 2ch: Mic In [Jack]
hdafg1: 2ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio1 at hdafg1: playback, capture, full duplex, independent
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio1: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr1 at audio1: PC Speaker (synthesized)
wsbell at spkr1 not configured
ppb0 at pci0 dev 28 function 0: Intel 8 Series PCIe (rev. 0xd5)
ppb0: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 3: Intel 8 Series PCIe (rev. 0xd5)
ppb1: PCI Express capability version 2 <Root Port of PCI-E Root Complex> x1 @ 5.0GT/s
ppb1: link is x1 @ 2.5GT/s
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0, 64-bit DMA: I210-T1 Ethernet Server Adapter (rev. 0x03)
wm1: for TX and RX interrupting at msix4 vec 0 affinity to 0
wm1: for TX and RX interrupting at msix4 vec 1 affinity to 1
wm1: for LINK interrupting at msix4 vec 2
wm1: PCI-Express bus
wm1: 2048 words FLASH(HW), version 3.16, Image Unique ID 800004d9
wm1: RX packet buffer size: 34KB
wm1: ROM image version 3.16 is older than 3.25
wm1: Ethernet address ac:1f:6b:f1:1a:85
wm1: Copper
wm1: 0xcc414100<FLASH_HW,PCIE,NEWQUEUE,EEE,PLLWA,CLSEMWA,CRC_STRIP,DELAY_LINKUP>
makphy0 at wm1 phy 1: I210 10/100/1000 media interface, rev. 0
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ehci1 at pci0 dev 29 function 0: Intel 8 Series USB EHCI (rev. 0x05)
ehci1: 64-bit DMA
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
ehci1: Using DMA subregion for control data structures
usb3 at ehci1: USB revision 2.0
ichlpcib0 at pci0 dev 31 function 0: Intel H81 LPC (rev. 0x05)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
ahcisata0 at pci0 dev 31 function 2: Intel 8 Series (desktop) SATA Controller (AHCI) (rev. 0x05)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.30, 4 ports, 32 slots, CAP 0xc730ff43<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SNCQ,S64A>
ahcisata0: interrupting at msi5 vec 0
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 4
atabus3 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: Intel 8 Series SMBus Controller (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
Intel 8 Series Thermal (miscellaneous DASP, revision 0x05) at pci0 dev 31 function 6 not configured
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, 16-byte FIFO
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, 16-byte FIFO
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
pms0 at pckbc0 (aux slot)
isa_intr_establish: no MP mapping found
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
spkr2 at pcppi0: PC Speaker
wsbell at spkr2 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer0: attached to pcppi0
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 2801801160 Hz quality 3000
uhub0 at usb0: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 3.00/1.00, addr 0
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) xHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 0
uhub1: 10 ports with 10 removable, self powered
IPsec: Initialized Security Association Processing.
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ahcisata0 port 1: device present, speed: 6.0Gb/s
ahcisata0 port 5: device present, speed: 3.0Gb/s
umass0 at uhub1 port 10 configuration 1 interface 0
umass0: Kingston (0x0951) DataTraveler 3.0 (0x1666), rev 2.10/1.10, addr 1
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Kingston, DataTraveler 3.0, PMAP> disk removable
sd0: fabricating a geometry
sd0: 14784 MB, 14784 cyl, 64 head, 32 sec, 512 bytes/sect x 30277632 sectors
sd0: fabricating a geometry
uhub4 at uhub2 port 1: vendor 8087 (0x8087) product 8008 (0x8008), class 9/0, rev 2.00/0.05, addr 2
uhub4: single transaction translator
uhub5 at uhub3 port 1: vendor 8087 (0x8087) product 8000 (0x8000), class 9/0, rev 2.00/0.05, addr 2
uhub5: single transaction translator
uhub4: 4 ports with 4 removable, self powered
uhub5: 6 ports with 6 removable, self powered
wd0 at atabus1 drive 0
wd0: <ST2000DM001-1CH164>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors (4096 bytes/physsect; first aligned sector: 8)
wd0: GPT GUID: 9e34dae6-bd5b-4369-b4e4-7c9aa8f17233
dk0 at wd0: "efi@Z1E71N9Q", 65536 blocks at 34, type: msdos
dk1 at wd0: "raid0@Z1E71N9Q", 3847029202 blocks at 65570, type: raidframe
dk2 at wd0: "swap@Z1E71N9Q", 59934363 blocks at 3847094772, type: swap
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
wd1 at atabus3 drive 0
wd1: <ST2000VX000-1CU164>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors (4096 bytes/physsect; first aligned sector: 8)
wd1: GPT GUID: 2ef3d6cd-f1e2-401f-be05-05d37722e862
dk3 at wd1: "efi@W1E5KH9M", 65536 blocks at 34, type: msdos
dk4 at wd1: "raid0@W1E5KH9M", 3847029202 blocks at 65570, type: raidframe
dk5 at wd1: "swap@W1E5KH9M", 59934363 blocks at 3847094772, type: swap
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133), NCQ (32 tags)
wd1(ahcisata0:5:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA), NCQ (31 tags)
swwdog0: software watchdog initialized
WARNING: findroot: double match for boot device (bootinfo/bootwedge:wd0 bootinfo/bootwedge:wd1)
raid0: RAID Level 1
raid0: Components: /dev/dk1 /dev/dk4
raid0: Total Sectors: 3847029120 (1878432 MB)
raid0: GPT GUID: f9a64892-aad8-4803-8055-1c59ec7718a2
dk6 at raid0: "root@raid0", 3847029053 blocks at 34, type: ffs
boot device: dk6
root on dk6 dumps on dk2
root file system type: ffs
kern.module.path=/stand/amd64/10.0/modules
[drm] PipeC fused off
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915drmkms0: interrupting at msi6 vec 0 (i915drmkms0)
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xe0009000, size 4096x2160, depth 32, stride 16384
{drm:netbsd:intel_enable_ddi+0x2c1} *ERROR* [CONNECTOR:72:HDMI-A-2] Failed to configure sink scrambling/TMDS bit clock ratio
{drm:netbsd:intel_set_cpu_fifo_underrun_reporting+0x29c} *ERROR* uncleared fifo underrun on pipe A
{drm:netbsd:intel_cpu_fifo_underrun_irq_handler+0x64} *ERROR* CPU pipe A FIFO underrun
{drm:netbsd:pipe_config_infoframe_mismatch+0x40} *ERROR* mismatch in hdmi infoframe
{drm:netbsd:pipe_config_infoframe_mismatch+0x4e} *ERROR* expected:
i915drmkms0: 68 bytes @ 0xffff90753b7e6be8
81 00 00 00 01 00 00 00  03 0c 00 00 04 00 00 00 | ................
ff ff ff ff 00 00 00 00  00 00 00 00 00 00 00 00 | ................
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
00 00 00 00                                      | ....
{drm:netbsd:pipe_config_infoframe_mismatch+0x6f} *ERROR* found:
i915drmkms0: 68 bytes @ 0xffff90753957dbe8
81 00 00 00 01 05 00 00  00 00 00 00 04 00 00 00 | ................
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00 | ................
00 00 00 00                                      | ....
warning: /usr/src/sys/external/bsd/drm2/dist/drm/i915/display/intel_display.c:14031: pipe state doesn't match!
wsdisplay0 at intelfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
pckbd_enable: command error
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)

-- 
Emmanuel Dreyfus
manu%netbsd.org@localhost