On 22 Jan 2000 21:15:00 -0600, Soren S. Jorvang wrote:
>On Sun, Jan 23, 2000 at 02:45:09AM +0000, Alan C. Horn wrote:
>> Ok, so windows reports this modem as a V90 K56flex HSP PCI Modem, using
>> com4 (from the windows idea of com), irq 11 and de80-de8f.
>> 
>> It's a PCTel PCI based modem card. Netbsd 1.4.1 (I guess as of end of
>> November last year, the last time I compiled) sees :
>
>This type of modem needs a lot of software support and does not
>currently work with NetBSD in any way.

How about PCI 15550 modems? Does anyone have any documentation on how to
get one of these working with NetBSD?

---------------------------------------------------------------
US Robotics (3Com) 3CP5609 PCI 15550 Modem (serial communications, interface
0x02, revision 0x01) at pci0 dev 12 function 0: PCI configuration registers:
  Common header:
    0x00: 0x100812b9 0x02100001 0x07000201 0x00000000

    Vendor Name: US Robotics (3Com) (0x12b9)
    Device Name: 3CP5609 PCI 15550 Modem (0x1008)
    Command register: 0x0001
      I/O space accesses: on
      Memory space accesses: off
      Bus mastering: off
      Special cycles: off
      MWI transactions: off
      Palette snooping: off
      Parity error checking: off
      Address/data stepping: off
      System error (SERR): off
      Fast back-to-back transactions: off
    Status register: 0x0210
      66 MHz capable: off
      User Definable Features (UDF) support: off
      Fast back-to-back capable: off
      Data parity error detected: off
      DEVSEL timing: medium (0x1)
      Slave signaled Target Abort: off
      Master received Target Abort: off
      Master received Master Abort: off
      Asserted System Error (SERR): off
      Parity error detected: off
    Class Name: communications (0x07)
    Subclass Name: serial (0x00)
    Interface: 0x02
    Revision ID: 0x01
    BIST: 0x00
    Header Type: 0x00 (0x00)
    Latency Timer: 0x00
    Cache Line Size: 0x00

  Type 0 ("normal" device) header:
    0x10: 0x0000d401 0x00000000 0x00000000 0x00000000
    0x20: 0x00000000 0x00000000 0x00000000 0x00ab12b9
    0x30: 0x00000000 0x000000dc 0x00000000 0x0000010a

    Base address register at 0x10
      type: i/o
      base: 0x0000d400, size: 0x00000008
    Base address register at 0x14
      not implemented(?)
    Base address register at 0x18
      not implemented(?)
    Base address register at 0x1c
      not implemented(?)
    Base address register at 0x20
      not implemented(?)
    Base address register at 0x24
      not implemented(?)
    Cardbus CIS Pointer: 0x00000000
    Subsystem vendor ID: 0x12b9
    Subsystem ID: 0x00ab
    Expansion ROM Base Address: 0x00000000
    Reserved @ 0x34: 0x000000dc
    Reserved @ 0x38: 0x00000000
    Maximum Latency: 0x00
    Minimum Grant: 0x00
    Interrupt pin: 0x01 (pin A)
    Interrupt line: 0x0a

  Device-dependent header:
    0x40: 0x00000000 0x00000000 0x00000000 0x00000000
    0x50: 0x00000000 0x00000000 0x00000000 0x00000000
    0x60: 0x00000000 0x00000000 0x00000000 0x00000000
    0x70: 0x00000000 0x00000000 0x00000000 0x00000000
    0x80: 0x00000000 0x00000000 0x00000000 0x00000000
    0x90: 0x00000000 0x00000000 0x00000000 0x00000000
    0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
    0xd0: 0x00000000 0x00000000 0x00000000 0x6c020001
    0xe0: 0xa0004000 0x00000000 0x00000000 0x00000000
    0xf0: 0x00000000 0x00000000 0x00000000 0x00000000

    Don't know how to pretty-print device-dependent header.

US Robotics (3Com) 3CP5609 PCI 15550 Modem (serial communications,
interface 0x02, revision 0x01) at pci0 dev 12 function 0 (tag 0x80006000,
intrtag 0x80006000, intrswiz 0, intrpin 0x1, i/o on, mem off, no quirks)
not configured

-----
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com2 at isa0 port 0x3e8-0x3ef irq 5: ns16550a, working fifo
lpt0 at isa0 port 0x378-0x37b irq 7