Subject: ifconfig -a vs. ifconfig ep0
To: NetBSD Tech-Net <tech-net@netbsd.org>
From: Mike Pelley <mike.pelley@coventus.com>
List: tech-net
Date: 07/10/2000 18:27:32
Running NetBSD 1.5_ALPHA, I noticed
helicon% ifconfig ep0
ep0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
media: Ethernet 10baseT
inet 10.1.0.102 netmask 0xffffff00 broadcast 10.1.0.255
inet6 fe80::260:97ff:fef8:30%ep0 prefixlen 64 scopeid 0x13
I was looking for the mac address of the ethernet card and was surprised
that it wasn't mentioned. Then I ran
helicon% ifconfig -a
...
[stuff about other interfaces deleted]
...
ep0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
address: 00:60:97:f8:00:30
media: Ethernet 10baseT
inet 10.1.0.102 netmask 0xffffff00 broadcast 10.1.0.255
inet6 fe80::260:97ff:fef8:30%ep0 prefixlen 64 scopeid 0x13
And noticed that the address was included there. Perhaps we should add the
address field to the first one as well, or am I missing something?
CU! Mike.