Subject: Re: in_addprefix() not handling RTF_HOST (pointtopoint) correctly.
To: None <itojun@iijlab.net>
From: Sean Boudreau <seanb@qnx.com>
List: tech-net
Date: 06/16/2003 09:51:51
PR 21903.
-seanb
On Fri, Jun 06, 2003 at 09:00:47AM -0400, Sean Boudreau wrote:
> On Fri, Jun 06, 2003 at 07:21:48PM +0900, itojun@iijlab.net wrote:
> > ># ifconfig ex0
> > >ex0: flags=8863<UP,BROADCAST,NOTRAILERS,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> > > capabilities=7<IP4CSUM,TCP4CSUM,UDP4CSUM>
> > > enabled=0<>
> > > address: 00:04:75:dc:7e:68
> > > media: Ethernet autoselect (100baseTX full-duplex)
> > > status: active
> > > inet 10.7.0.131 netmask 0xff000000 broadcast 10.255.255.255
> > > inet6 fe80::204:75ff:fedc:7e68%ex0 prefixlen 64 scopeid 0x2
> > ># ifconfig gif0
> > >gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
> > ># netstat -rnfinet
> > >Routing tables
> > >
> > >Internet:
> > >Destination Gateway Flags Refs Use Mtu Interface
> > >10 link#2 UC 0 0 - ex0
> > >127 127.0.0.1 UGRS 0 0 33220 lo0
> > >127.0.0.1 127.0.0.1 UH 1 2 33220 lo0
> > ># ifconfig gif0 10.0.0.1 10.0.0.2
> > ># netstat -rnfinet
> > >Routing tables
> > >
> > >Internet:
> > >Destination Gateway Flags Refs Use Mtu Interface
> > >10 link#2 UC 0 0 - ex0
> > >127 127.0.0.1 UGRS 0 0 33220 lo0
> > >127.0.0.1 127.0.0.1 UH 1 2 33220 lo0
> > ># route add -host -iface 10.0.0.2 10.0.0.1
> > >add host 10.0.0.2: gateway 10.0.0.1
> > >
> > >^^^^^^^^^^^^^^^^^
> > >This last step appears to be a regression from 1.5 as on that version
> > >the route is added automatically by the kernel.
> >
> > the host route gets installed ok for me on -current. i guess this is
> > due to the fact you have 10.0.0.0/8 assigned to your ex0 interface
> > already. try another number (like 20.0.0.1 20.0.0.2) on gif0 and
> > see what happens.
>
> Yes, I chose addresses on the same subnet to show the behaviour.
> in_addprefix() is always masking against the netmask, even for RTF_HOST.
> This doesn't seem right. Please see the previous diff.
>
> -seanb