Since updating to NetBSD 4.0_BETA2 (from NetBSD 3) I've
 	been unable to get wiconfig -D to work. I've tried with
 	ath0, rtw0, and iwi0 on two different machines.

 	In all cases the ioctl() SIOCGWAVELAN loop times out without
 	getting any result.

 	Increasing retries from 10 to 60 (sec) did not affect the result.

 	Is there anything I should be looking at to try to track this
 	down?

ath0 at pci2 dev 2 function 0
ath0: interrupting at irq 3
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 5.6 phy 4.1 5 GHz radio 1.7 2 GHz radio 2.3

rtw0 at cardbus0 function 0: Realtek RTL8180 802.11 MAC/BBP
rtw0: interrupting at 10
rtw0: hardware version F
rtw0: SROM version 1.2
rtw0: RF: Philips SA2400A, PA: Philips SA2411
rtw0: analog PHY
rtw0: CS threshold 11
rtw0: Geographic Location USA
rtw0: 802.11 address 00:09:5b:e2:43:7b
rtw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

iwi0 at pci3 dev 1 function 0: Intel PRO/Wireless LAN 2200BG Mini-PCI Adapter (rev. 0x05)
iwi0: interrupting at irq 11
iwi0: 802.11 address 00:12:f0:6c:2e:15
iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps



-- 
 			   David Brownlee -- abs@absd.org