-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi

This week I bought new linksys wrt54Gl router.
My laptop has ipw card.
ipw0 at pci2 dev 2 function 0: Intel PRO/Wireless LAN 2100 3B Mini-PCI Adapter
(rev. 0x04)
ipw0: interrupting at irq 10
ipw0: 802.11 address 00:04:23:74:4b:5c
ipw0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

without protection I can connect to my router and everything works fine.

I don't know how to setup my linksys router and netbsd wpa_supplicant.conf.
If I want to use WPA or WPA2 wifi encryption.

for now I configure my linksys with this:
  Security Mode:  WPA2 Personal
  WPA Algorithms: TKIP+AES 	  	
  WPA Shared  Key: xxxxx 	  		
  Group Key  Renewal: 3600

and in my wpa_supplicant.conf I have:

# used by wpa_cli(8) (see 'troubleshooting' below)
 ctrl_interface=/var/run/wpa_supplicant
 ctrl_interface_group=0

 # boilerplate, essentially. see the example for a walkthrough
 eapol_version=1
 ap_scan=1
 fast_reauth=1

 # 'network' is a group of APs sharing a SSID
 network={
         ssid="linksys"
         scan_ssid=1
         # 'RSN' == 'WPA2'
         proto=RSN WPA
         # that's 'pre-shared key'
         key_mgmt=WPA-PSK
         # lists ciphers to try. CCMP is AES
         # pairwise is for client <-> AP traffic, group is for broadcasts
         pairwise=CCMP TKIP
         group=CCMP TKIP
         psk="xxxx"
  	 }


Also in my /etc/ifconfig.ipw0 I have
!/usr/sbin/wpa_supplicant -B -i ipw0 -c /etc/wpa_supplicant.conf

when I run wpa_supplicat in debug mode (/usr/sbin/wpa_supplicant -dd -i ipw0 -c
/etc/wpa_supplicant.conf) I got this output.

Initializing interface 'ipw0' conf '/etc/wpa_supplicant.conf' driver 'default'
ctrl_interface 'N/A'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group=0
eapol_version=1
ap_scan=1
fast_reauth=1
Priority group 0
   id=0 ssid='linksys'
Initializing interface (2) 'ipw0'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Own MAC address: 00:04:23:74:4b:5c
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
Setting scan request: 0 sec 100000 usec
Added interface ipw0
State: DISCONNECTED -> SCANNING
Starting AP scan (specific SSID)
Scan SSID - hexdump_ascii(len=7):
     6c 69 6e 6b 73 79 73                              linksys
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:18:f8:68:25:25 ssid='linksys' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:18:f8:68:25:25 (SSID='linksys' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00
00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: SCANNING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'linksys' wpa ie len 24 pairwise 3 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:18:f8:68:25:25 ssid='linksys' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:18:f8:68:25:25 (SSID='linksys' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00
00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'linksys' wpa ie len 24 pairwise 3 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:18:f8:68:25:25 ssid='linksys' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:18:f8:68:25:25 (SSID='linksys' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00
00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'linksys' wpa ie len 24 pairwise 3 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:18:f8:68:25:25 ssid='linksys' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:18:f8:68:25:25 (SSID='linksys' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00
00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'linksys' wpa ie len 24 pairwise 3 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:18:f8:68:25:25 ssid='linksys' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:18:f8:68:25:25 (SSID='linksys' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00
00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'linksys' wpa ie len 24 pairwise 3 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
Received 0 bytes of scan results (2 BSSes)
Scan results: 2
Selecting BSS from priority group 0
0: 00:18:f8:68:25:25 ssid='linksys' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
   selected based on WPA IE
Trying to associate with 00:18:f8:68:25:25 (SSID='linksys' freq=2462 MHz)
Cancelling scan request
WPA: clearing own WPA/RSN IE
Automatic auth_alg selection: 0x1
WPA: using IEEE 802.11i/D3.0
WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00
00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
WPA: clearing AP RSN IE
WPA: using GTK TKIP
WPA: using PTK CCMP
WPA: using KEY_MGMT WPA-PSK
WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00 00 50 f2
02 01 00 00 50 f2 04 01 00 00 50 f2 02
No keys have been configured - skip key clearing
wpa_driver_bsd_set_drop_unencrypted: enabled=1
State: ASSOCIATING -> ASSOCIATING
wpa_driver_bsd_associate: ssid 'linksys' wpa ie len 24 pairwise 3 group 2 key mgmt 1
wpa_driver_bsd_associate: set PRIVACY 1
Setting authentication timeout: 10 sec 0 usec
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto

wpa_cupplicant froze in State: ASSOCIATING -> ASSOCIATING forever.

Can somebody help me with this ? or I missed something ?


Regards.


- ---------------------------------------------------------------
Adam Hamsik
ICQ 249727910
jabber haad@jabber.org
- ---------------------------------------------------------------
There are 10 kinds of people in the world. Those who understand
binary numbers, and those who don't.
				
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (NetBSD)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFFshFY9Wt2FT7y228RAlQ1AJ0XyYKDuMzMx/5+f2j7UQkLSvBPQwCgqvW+
EsH4yFLTkwvONqjMmjIqj50=
=t0Kx
-----END PGP SIGNATURE-----