boot problems with bge(4)

[Christoph Egger <Christoph_Egger%gmx.de@localhost>]

Hi,


[...]
bge0 at pci0 dev 20 function 6: Broadcom BCM5785G Gigabit Ethernet
bge0: interrupting at ioapic1 pin 18, event channel 9
bge0: unable to find PCIX capability
bge0: firmware handshake timed out, val = 4b657654
bge0: firmware handshake timed out, val = 4b657654
bge0: ASIC unknown BCM5785 (0x5785041), Ethernet address 00:00:1a:1a:d8:ab
brgphy0 at bge0 phy 1: BCM5785 1000BASE-T media interface, rev. 3
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FD , auto
[...]

I have a local patch to attach brgphy on bge(4) rather ukphy(4) ...


bge0: firmware handshake timed out, val = 4b657654
bge0: firmware handshake timed out, val = 4b657654
bge0: discarding oversize frame (len=-4)
bge0: discarding oversize frame (len=-4)
nfs_boot: trying DHCP/BOOTP
bge0: watchdog timeout -- resetting
bge0: firmware handshake timed out, val = 4b657654
bge0: firmware handshake timed out, val = 4b657654
bge0: discarding oversize frame (len=-4)
bge0: discarding oversize frame (len=-4)
nfs_boot: timeout...
nfs_boot: timeout...


The "discarding oversize frame" message comes from if_ethersubr.c

Christoph