Hi,

Here is my Abit BP6 running two 458 MHz Celery processors (366 MHz at 83
MHz bus speed).

This is again running NetBSD 1.6 with GENERIC.MP.

Thanks!
John Klos
Sixgirls Computing Labs


NetBSD 1.6_BETA1 (GENERIC.MP) #0: Sat Jun  8 20:07:10 UTC 2002
    jean@persephone.sixgirls.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 127 MB
avail memory = 112 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xfb3f0
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Celeron (Mendocino) (686-class), 456.53 MHz
cpu0: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183fbff<FXSR>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 83 MHz
cpu0: 8 page colors
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Celeron (Mendocino) (686-class), 456.51 MHz
cpu1: features 183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 183fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu1: features 183fbff<FXSR>
cpu1: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu1: L2 cache 128 KB 32b/line 4-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type ISA
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4)
(rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 71626 AP>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 1554 MB, 3158 cyl, 16 head, 63 sec, 512 bytes/sect x 3184170 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
uhci0 at pci0 dev 7 function 2: Intel 82371AB USB Host Controller (PIIX4)
(rev. 0x01)
pci_intr_map: bus 0 dev 7 func 2 pin 4; line 9
pci_intr_map: no MP mapping found
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge,
revision 0x02)
 at pci0 dev 7 function 3 not configured
rtk0 at pci0 dev 13 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at apic 2 int 17 (irq 5)
rtk0: Ethernet address 00:50:fc:3d:af:12
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 15 function 0: S3 Trio32/64 (rev. 0x40)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pciide1 at pci0 dev 19 function 0: Triones/Highpoint HPT366 IDE Controller
pciide1: bus-master DMA support present
pciide1: primary channel wired to native-PCI mode
pciide1: using apic 2 int 18 (irq 11) for native-PCI interrupt
pciide2 at pci0 dev 19 function 1: Triones/Highpoint HPT366 IDE Controller
pciide2: bus-master DMA support present
pciide2: primary channel wired to native-PCI mode
pciide2: using apic 2 int 18 (irq 11) for native-PCI interrupt
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask 0 netmask 0 ttymask 0
ioapic0: enabling
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)