Re: Radeon HD 3450 X problem

[christos%astron.com@localhost (Christos Zoulas)]

In article <201012031504.36733.mark%ecs.vuw.ac.nz@localhost>,
Mark Davies  <mark%ecs.vuw.ac.nz@localhost> wrote:
>Trying to get X running on a Radeon HD 3450 card on a -current/i386 
>from yesterday.  Tried with both the pkgsrc X and the native X and in 
>both cases the whole machine hangs when X tries to start.  In the 
>native case prints the following then the whole machine locks up:
>
>test# /usr/X11R7/bin/Xorg -config /etc/Xorg.new :0
>InitConnectionLimits: MaxClients = 255
>
>X.Org X Server 1.9.2
>Release Date: 2010-10-30
>X Protocol Version 11, Revision 0
>Build Operating System: NetBSD/i386  -
>Current Operating System: NetBSD test.ecs.vuw.ac.nz 5.99.41 NetBSD 
>5.99.41 (ECS_WORKSTATION) #0: Fri Dec  3 11:27:01 NZDT 2010  
>mark%turakirae.ecs.vuw.ac.nz@localhost:/local/SAVE/cur.obj/src/work/src/sys/arch/i386/compile/ECS_WORKSTATION
> 
>i386
>Build Date: 23 November 2010  01:33:05AM
>
>Current version of pixman: 0.21.2
>        Before reporting problems, check http://wiki.X.Org
>        to make sure that you have the latest version.
>Markers: (--) probed, (**) from config file, (==) default setting,
>        (++) from command line, (!!) notice, (II) informational,
>        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec  3 14:52:33 2010
>Converted `/usr/share/X11/%X' to `/usr/share/X11/xorg.conf.d'
>Converted `%D/X11/%X' to `/usr/X11R6/share/X11/xorg.conf.d'
>Converted `/etc/X11/%X' to `/etc/X11/xorg.conf.d'
>Converted `%C/X11/%X' to `/usr/X11R6/etc/X11/xorg.conf.d'
>Converted `%A' to `/etc/Xorg.new'
>(++) Using config file: "/etc/Xorg.new"
>Found 1 screens in the layout section MCS ConfiguredFound 0 inactive 
>devices in the layout section MCS Configured
>Found 2 input devices in the layout section MCS Configured
>radeon: card at 1:0:0 is claimed by a Device section
>  XRANDR name: DVI-1
>  Connector: DVI-I
>  CRT1: INTERNAL_KLDSCP_DAC1
>  DFP2: INTERNAL_KLDSCP_LVTMA
>  DDC reg: 0x7e60
>  XRANDR name: DVI-0
>  Connector: DVI-I
>  CRT2: INTERNAL_KLDSCP_DAC2
>  DFP1: INTERNAL_UNIPHY
>  DDC reg: 0x7e20
>xf86RegisterRootWindowProperty(0, 69, 19, 8, 128, 0xbb519380)
>new property filled
>creating xf86RegisteredPropertiesTable[] size 1
>xf86RegisteredPropertiesTable 0xbb534f40
>xf86RegisteredPropertiesTable[0] 0x0
>xf86RegisterRootWindowProperty succeeded
>finished output detect: 0
>Dac detection success
>Unhandled monitor type 0
>finished output detect: 1
>finished all detect
>xf86RegisterRootWindowProperty(0, 69, 19, 8, 128, 0xbb519500)
>new property filled
>xf86RegisteredPropertiesTable 0xbb534f40
>xf86RegisteredPropertiesTable[0] 0xbb534f00
>xf86RegisterRootWindowProperty succeeded
>Dac detection success
>Unhandled monitor type 0
>xf86RegisterRootWindowProperty(0, 71, 19, 32, 1, 0xbb51811c)
>new property filled
>xf86RegisteredPropertiesTable 0xbb534f40
>xf86RegisteredPropertiesTable[0] 0xbb534f00
>xf86RegisterRootWindowProperty succeeded
>Output DIG0 transmitter setup success
>Blank CRTC 0 success
>Disable CRTC memreq 0 success
>Disable CRTC 0 success
>Blank CRTC 1 success
>Disable CRTC memreq 1 success
>Disable CRTC 1 success
>mc fb loc is 00df00d0
>
>
>any suggestions?

You are lucky. My intel 915 causes the machine to hard-hang!

christos