Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?

To: riastradh%NetBSD.org@localhost
Subject: Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
From: Havard Eidnes <he%NetBSD.org@localhost>
Date: Mon, 06 Oct 2014 23:51:50 +0200 (CEST)

Oh,

just in case it proves useful, here's the kernel message buffer,
which contains the aborted DRMKMS as well as the GENERIC boot
messages.

Regards,

- Håvard

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_BETA (DRMKMS) #0: Wed Sep 24 07:01:20 CEST 2014
	he%is.urc.uninett.no@localhost:/usr/obj/sys/arch/amd64/compile/DRMKMS
total memory = 6135 MB
avail memory = 5938 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0xfa950 000014 (v00 ACPIAM)
ACPI: RSDT 0x7f790000 00003C (v01 A M I  OEMRSDT  09000601 MSFT 00000097)
ACPI: FACP 0x7f790200 000084 (v02 A M I  OEMFACP  09000601 MSFT 00000097)
ACPI: DSDT 0x7f790440 007606 (v01  A0518 A0518000 00000000 INTL 20060113)
ACPI: FACS 0x7f79e000 000040
ACPI: APIC 0x7f790390 00006C (v01 A M I  OEMAPIC  09000601 MSFT 00000097)
ACPI: MCFG 0x7f790400 00003C (v01 A M I  OEMMCFG  09000601 MSFT 00000097)
ACPI: OEMB 0x7f79e040 00007B (v01 A M I  AMI_OEM  09000601 MSFT 00000097)
ACPI: ASF! 0x7f797a50 000099 (v32 LEGEND I865PASF 00000001 INTL 20060113)
ACPI: GSCI 0x7f79e0c0 002024 (v01 A M I  GMCHSCI  09000601 MSFT 00000097)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, id 0x6f6
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,09000601>, AslId <MSFT,00000097>
ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x0E, should be 0x15 (20131218/tbprint-237)
ACPI BIOS Warning (bug): Incorrect checksum in table [OEMB] - 0x23, should be 0x1E (20131218/tbprint-237)
ACPI: SSDT 0x7f797af0 0002E3 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 0x0 0002E3 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 0x7f797de0 0002DA (v01    AMI   CPU2PM 00000001 INTL 20060113)
ACPI: SSDT 0x0 0002DA (v01    AMI   CPU2PM 00000001 INTL 20060113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MCH (PNP0C01) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
SIOR (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
RMSC (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
LPTE (PNP0401) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
OMSC (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
PCIE (PNP0C02) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
RMEM (PNP0C01) WARNING: module error: vfs load failed for `acpiverbose', error 45
at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
WARNING: module error: vfs load failed for `acpiverbose', error 45
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82965G Host Bridge (rev. 0x02)
agp0 at pchb0: i965-family chipset
pci_mem_find: expected mem type 00000004, found 00000000
agp0: can't find MMIO registers
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 7.0_BETA (GENERIC) #1: Wed Sep 17 20:37:35 CEST 2014
	he%is.urc.uninett.no@localhost:/usr/obj/sys/arch/amd64/compile/GENERIC
total memory = 6135 MB
avail memory = 5940 MB
kern.module.path=/stand/amd64/7.0/modules
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System manufacturer System Product Name (System Version)
mainbus0 (root)
ACPI: RSDP 0xfa950 000014 (v00 ACPIAM)
ACPI: RSDT 0x7f790000 00003C (v01 A M I  OEMRSDT  09000601 MSFT 00000097)
ACPI: FACP 0x7f790200 000084 (v02 A M I  OEMFACP  09000601 MSFT 00000097)
ACPI: DSDT 0x7f790440 007606 (v01  A0518 A0518000 00000000 INTL 20060113)
ACPI: FACS 0x7f79e000 000040
ACPI: APIC 0x7f790390 00006C (v01 A M I  OEMAPIC  09000601 MSFT 00000097)
ACPI: MCFG 0x7f790400 00003C (v01 A M I  OEMMCFG  09000601 MSFT 00000097)
ACPI: OEMB 0x7f79e040 00007B (v01 A M I  AMI_OEM  09000601 MSFT 00000097)
ACPI: ASF! 0x7f797a50 000099 (v32 LEGEND I865PASF 00000001 INTL 20060113)
ACPI: GSCI 0x7f79e0c0 002024 (v01 A M I  GMCHSCI  09000601 MSFT 00000097)
ACPI: All ACPI Tables successfully acquired
cpu0 at mainbus0 apid 0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, id 0x6f6
cpu1 at mainbus0 apid 1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz, id 0x6f6
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20131218
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,09000601>, AslId <MSFT,00000097>
ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x0E, should be 0x15 (20131218/tbprint-237)
ACPI BIOS Warning (bug): Incorrect checksum in table [OEMB] - 0x23, should be 0x1E (20131218/tbprint-237)
ACPI: SSDT 0x7f797af0 0002E3 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 0x0 0002E3 (v01    AMI   CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 0x7f797de0 0002DA (v01    AMI   CPU2PM 00000001 INTL 20060113)
ACPI: SSDT 0x0 0002DA (v01    AMI   CPU2PM 00000001 INTL 20060113)
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
MCH (PNP0C01) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
UAR1 (PNP0501) at acpi0 not configured
SIOR (PNP0C02) at acpi0 not configured
RMSC (PNP0C02) at acpi0 not configured
aibs0 at acpi0 (ASOC, ATK0110-16843024): ASUSTeK AI Booster
LPTE (PNP0401) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F03) (aux port): irq 12
PCIE (PNP0C02) at acpi0 not configured
RMEM (PNP0C01) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
ACPI: Enabled 3 GPEs in block 00 to 1F
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-646)
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x29a0 (rev. 0x02)
agp0 at pchb0: i965-family chipset
pci_mem_find: expected mem type 00000004, found 00000000
agp0: can't find MMIO registers
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x29a1 (rev. 0x02)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex> x16 @ 2.5Gb/s
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x29a2 (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
i915drm0 at vga0: Intel i965G
i915drm0: AGP at 0xd0000000 256MB
i915drm0: Initialized i915 1.6.0 20080730
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x2834 (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: vendor 0x8086 product 0x2835 (rev. 0x02)
uhci1: interrupting at ioapic0 pin 17
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x283a (rev. 0x02)
ehci0: interrupting at ioapic0 pin 18
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: ADI AD1988A
hdafg0: DAC00 8ch: Speaker [Jack]
hdafg0: ADC01 2ch: CD [Built-In], Line In [Jack], Mic In [Jack]
hdafg0: DAC02 2ch: HP Out [Jack]
hdafg0: DIG04 2ch: SPDIF Out [Jack]
hdafg0: 8ch/2ch 8000Hz 11025Hz 16000Hz 22050Hz 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: full duplex, playback, capture, mmap, independent
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x283f (rev. 0x02)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci2 at ppb1 bus 7
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci2 dev 0 function 0: vendor 0x13c1 product 0x1004 (rev. 0x01)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 52986.1952, 31 ports, 14 slots, CAP 0xcefaadde<EMS,CCCS,PSC,PMD,SPM,SNZO,ISS=0x7,SAL,SALP,SSS,SNCQ,S64A>
atabus0 at ahcisata0 channel 1
atabus1 at ahcisata0 channel 2
atabus2 at ahcisata0 channel 3
atabus3 at ahcisata0 channel 4
atabus4 at ahcisata0 channel 6
atabus5 at ahcisata0 channel 7
atabus6 at ahcisata0 channel 8
atabus7 at ahcisata0 channel 10
atabus8 at ahcisata0 channel 11
atabus9 at ahcisata0 channel 13
atabus10 at ahcisata0 channel 15
atabus11 at ahcisata0 channel 17
atabus12 at ahcisata0 channel 19
atabus13 at ahcisata0 channel 20
atabus14 at ahcisata0 channel 21
atabus15 at ahcisata0 channel 22
atabus16 at ahcisata0 channel 23
atabus17 at ahcisata0 channel 25
atabus18 at ahcisata0 channel 26
atabus19 at ahcisata0 channel 27
atabus20 at ahcisata0 channel 30
atabus21 at ahcisata0 channel 31
ppb2 at pci0 dev 28 function 1: vendor 0x8086 product 0x2841 (rev. 0x02)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci3 at ppb2 bus 6
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 2: vendor 0x8086 product 0x2843 (rev. 0x02)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 3: vendor 0x8086 product 0x2845 (rev. 0x02)
ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci5 at ppb4 bus 4
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
ppb5 at pci0 dev 28 function 4: vendor 0x8086 product 0x2847 (rev. 0x02)
ppb5: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci6 at ppb5 bus 3
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
jmide0 at pci6 dev 0 function 0: vendor 0x197b product 0x2363 (rev. 0x02)
jmide0: 1 PATA port, 2 SATA ports
jmide0: interrupting at ioapic0 pin 16
ahcisata1 at jmide0
ahcisata1: AHCI revision 1.0, 2 ports, 32 slots, CAP 0xc722ff01<PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SNCQ,S64A>
atabus22 at ahcisata1 channel 0
atabus23 at ahcisata1 channel 1
jmide0: PCI IDE interface used
jmide0: bus-master DMA support present
jmide0: primary channel wired to native-PCI mode
jmide0: primary channel is unused
jmide0: secondary channel wired to native-PCI mode
jmide0: secondary channel is PATA
atabus24 at jmide0 channel 1
ppb6 at pci0 dev 28 function 5: vendor 0x8086 product 0x2849 (rev. 0x02)
ppb6: PCI Express 1.0 <Root Port of PCI-E Root Complex> x1 @ 2.5Gb/s
pci7 at ppb6 bus 2
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci7 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x01)
re0: interrupting at ioapic0 pin 17
re0: Ethernet address 00:18:f3:05:c2:a0
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
uhci2 at pci0 dev 29 function 0: vendor 0x8086 product 0x2830 (rev. 0x02)
uhci2: interrupting at ioapic0 pin 23
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: vendor 0x8086 product 0x2831 (rev. 0x02)
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: vendor 0x8086 product 0x2832 (rev. 0x02)
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x2836 (rev. 0x02)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci2 uhci3 uhci4
usb6 at ehci1: USB revision 2.0
ppb7 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xf2)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x2810 (rev. 0x02)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
piixide0 at pci0 dev 31 function 2: Intel 82801H Serial ATA Controller (ICH8) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to native-PCI mode
piixide0: using ioapic0 pin 19 for native-PCI interrupt
atabus25 at piixide0 channel 0
piixide0: secondary channel configured to native-PCI mode
atabus26 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x283e (rev. 0x02)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
piixide1 at pci0 dev 31 function 5: Intel 82801H Serial ATA Controller (ICH8) (rev. 0x02)
piixide1: bus-master DMA support present
piixide1: primary channel wired to native-PCI mode
piixide1: using ioapic0 pin 19 for native-PCI interrupt
atabus27 at piixide1 channel 0
piixide1: secondary channel wired to native-PCI mode
atabus28 at piixide1 channel 1
isa0 at ichlpcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
acpicpu0 at cpu0: ACPI CPU
ACPI Warning: \_PR_.CPU1._PSS: SubPackage[8,9] - suspicious power dissipation values (20131218/nsrepair2-777)
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat  10 us, pow 22464 mW, 2394 MHz
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
ACPI Warning: \_PR_.CPU2._PSS: SubPackage[8,9] - suspicious power dissipation values (20131218/nsrepair2-777)
coretemp1 at cpu1: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
IPsec: Initialized Security Association Processing.
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
uhub6 at usb6: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ehci1: handing over low speed device on port 5 to uhci4
ahcisata0 port 1: unknown SStatus: 0xffffffff
ahcisata0 port 2: unknown SStatus: 0xffffffff
ahcisata0 port 3: unknown SStatus: 0xffffffff
ahcisata0 port 4: unknown SStatus: 0xffffffff
ahcisata0 port 6: unknown SStatus: 0xffffffff
ahcisata0 port 7: unknown SStatus: 0xffffffff
ahcisata0 port 8: unknown SStatus: 0xffffffff
ahcisata0 port 10: unknown SStatus: 0xffffffff
ahcisata0 port 11: unknown SStatus: 0xffffffff
ahcisata0 port 13: unknown SStatus: 0xffffffff
ahcisata0 port 15: unknown SStatus: 0xffffffff
ahcisata0 port 17: unknown SStatus: 0xffffffff
ahcisata0 port 19: unknown SStatus: 0xffffffff
ahcisata0 port 20: unknown SStatus: 0xffffffff
ahcisata0 port 21: unknown SStatus: 0xffffffff
ahcisata0 port 22: unknown SStatus: 0xffffffff
ahcisata0 port 23: unknown SStatus: 0xffffffff
ahcisata0 port 25: unknown SStatus: 0xffffffff
ahcisata0 port 26: unknown SStatus: 0xffffffff
ahcisata0 port 27: unknown SStatus: 0xffffffff
ehci1: handing over full speed device on port 6 to uhci4
ehci1: handing over full speed device on port 6 to uhci4
uhub5: device problem, disabling port 1
ehci1: handing over full speed device on port 6 to uhci4
atapibus0 at atabus27: 2 targets
cd0 at atapibus0 drive 0: <ATAPI   iHAS324   E, 3524679 27841650145, 4L16> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd0 at atabus28 drive 0
wd0: <WDC WD1200JS-00NCB1>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide1:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
aibs0: warning under limit on 'POWER FAN Speed'

References:
- Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
  - From: Havard Eidnes
- Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
  - From: Taylor R Campbell
- Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
  - From: Havard Eidnes

Prev by Date: Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
Next by Date: Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
Previous by Thread: Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
Next by Thread: Re: Radeondrm w/RV370 / X300 SE on 7.0_BETA -- working?
Indexes:

Home | Main Index | Thread Index | Old Index