Re: Continuing problems with Dell PE 1550.

[Lars-Johan Liman <liman%autonomica.se@localhost>]

bouyer%antioche.eu.org@localhost:
> OK, the panic later is probably a consequence of this.
> The kernel seems to have trouves talking to the board, but now we have to
> find why ...

It sits on a PCI raiser card ... which is an evil contraption in my
mind, but it's a "one slot" raiser (using 1 PCI slot on the mother
board, providing just one slot in a 90 degree angle), since it's a 1U
chassi.

> At work 2 DELL servers have been ordered, with RAID adapters. If
> we're luky that will be amr controllers, and I'll be able to debug
> this locally.

Ah. If you don't feel like waiting ... ;-) ... I'm quite willing to
give you net access to the box. It's quite empty, and it has serial
console to a box just next to it. Given previous experience of Dell,
I'm also quite willing to believe that the design has changed 24 times
since the days of my old 1550 as compared to anything you might have
on order today. :-) The specs probably changed between the time you
ordered it, and the day you actually get it delivered! :-) :-)

                                Cheers,
                                  /Liman

BTW, here's the dmesg from the samce box, booted via GRUB to "chained
NetBSD boot loader" to NetBSD-daily/HEAD/i386/200604100000Z/GENERIC.

tcsh> uname -a
NetBSD gallery.liman.net 3.99.17 NetBSD 3.99.17 (GENERIC) #0: Mon Apr 10 
08:27:09 UTC 2006  
builds%b4.netbsd.org@localhost:/home/builds/ab/HEAD/i386/200604100000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
 i386

tcsh> dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.17 (GENERIC) #0: Mon Apr 10 08:27:09 UTC 2006
        
builds%b4.netbsd.org@localhost:/home/builds/ab/HEAD/i386/200604100000Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 1023 MB
avail memory = 997 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 997.52 MHz, id 0x68a
cpu0: features 387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 387fbff<PGE,MCA,CMOV,PAT,PSE36,PN,MMX>
cpu0: features 387fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: serial number 0000-068a-0000-383d-f46b-54f6
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI bridge (rev. 0x23)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI bridge (rev. 0x01)
pchb2 at pci0 dev 0 function 2
pchb2: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci1 at pchb2 bus 1
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb0 at pci1 dev 4 function 0: Digital Equipment DC21154 PCI-PCI Bridge (rev. 
0x05)
pci2 at ppb0 bus 2
pci2: i/o space, memory space enabled
ppb1 at pci2 dev 0 function 0: Digital Equipment DC21154 PCI-PCI Bridge (rev. 
0x05)
pci3 at ppb1 bus 3
pci3: i/o space, memory space enabled
amr0 at pci3 dev 0 function 0: AMI RAID <PERC 3/DC>
amr0: interrupting at irq 10
amr0: firmware 1.57, BIOS 3.13, 64MB RAM
ld0 at amr0 unit 0: RAID 1, optimal
ld0: 34678 MB, 8807 cyl, 128 head, 63 sec, 512 bytes/sect x 71020544 sectors
ld1 at amr0 unit 1: RAID 0, optimal
ld1: 69878 MB, 8908 cyl, 255 head, 63 sec, 512 bytes/sect x 143110144 sectors
isp0 at pci2 dev 1 function 0: QLogic Dual Channel Ultra-3 Wide SCSI HBA
isp0: interrupting at irq 11
isp0: interrupt (ISR=4 SEMA=0) when not ready
isp0: Polled Mailbox Command (0x8) Timeout
isp0: interrupt (ISR=4 SEMA=0) when not ready
isp0: Polled Mailbox Command (0x32) Timeout
pchb3 at pci0 dev 0 function 3
pchb3: ServerWorks CNB30-LE PCI bridge (rev. 0x01)
pci4 at pchb3 bus 4
pci4: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
fxp0 at pci0 dev 1 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 12
fxp0: Ethernet address 00:06:5b:38:4e:5c
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 3 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 southbridge (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at irq 14
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at irq 15
atabus1 at rccide0 channel 1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG CD-ROM SN-124, , q009> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) 
(using DMA)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
fxp0: link state changed to DOWN
fxp0: link state changed to UP
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)