Re: bnx driver in 5.99.7 panics under xen 3.3.1

To: Manuel Bouyer <bouyer%antioche.eu.org@localhost>
Subject: Re: bnx driver in 5.99.7 panics under xen 3.3.1
From: Mike Bowie <mbowie%buzmo.com@localhost>
Date: Wed, 28 Jan 2009 06:20:51 -0800

Manuel Bouyer wrote:

On Tue, Jan 27, 2009 at 01:30:28PM -0800, Mike Bowie wrote:

[...]
bnx0 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T
ioapic1: int5
0x1a9a8<vector=0xa8,delmode=0x1,logical,actlo,level,masked,dest=0x0>
0xff000000<target=0xff>
bnx0: Ethernet address 00:22:19:53:d8:a3
xen_alloc_contig: XENMEM_decrease_reservation failed!
bnx0: Could not create Tx mbuf 0 DMA map!


This is more serious than just a bnx issue. I can't see how a
XENMEM_decrease_reservation can fail, unless it gets passed nonexistent
pages. Can you try booting xen-debug.gz instead of xen.gz, and see
if xen has something to say about this XENMEM_decrease_reservation
operation (should appear just before the NetBSD kernel reports that
it failed).

Hrm... in a bizarre twist of fate, xen-debug.gz actually manages to getpast the bnx init. Here's the serial dump, not sure why it stops whereit does, but I won't be able to look at that until tonight.


Cheers!

Mike.

1197736+624984=0x1bd0ac

Loading /netbsd-XEN3_DOM0 console=com2__ __ _____ _____ _

\ \/ /___ _ __   |___ / |___ / / |

\ // _ \ '_ \ |_ \ |_ \ | |Bus Speed: 1000 MHz, L2/L3 Cache: 2MB/2 MB

 /  \  __/ | | |  ___) | ___) || |
/_/\_\___|_| |_| |____(_)____(_)_|Memory Speed: 667 MHz

(XEN) Xen version 3.3.1 (mbowie@) (gcc version 4.1.3 20080704 prerelease(NetBSD nb1 20080202)) Tue Jan 27 04:06:50 UTC 2009

(XEN) Latest ChangeSet: unavailable
(XEN) Command line: dom0_mem=2048M console=com2 com2=9600,8n1
(XEN) Video information:D Controller BIOS
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: V2; EDID transfer time: 2 seconds
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 00000000000a0000 (usable)
(XEN)  0000000000100000 - 00000000dfac0000 (usable)
(XEN)  00000000dfac0000 - 00000000dfad6000 (reserved)
(XEN)  00000000dfad6000 - 00000000dfaf5c00 (ACPI data)
(XEN)  00000000dfaf5c00 - 00000000e0000000 (reserved)
(XEN)  00000000f0000000 - 00000000f8000000 (reserved)
(XEN)  00000000fe000000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000120000000 (usable)
(XEN) System RAM: 4090MB (4188544kB)
(XEN) ACPI: RSDP 000F2210, 0024 (r2 DELL  )
(XEN) ACPI: XSDT 000F228C, 008C (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: FACP DFAF1BD8, 00F4 (r3 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: DSDT DFAD6000, 476A (r1 DELL   PE_SC3          1 INTL 20050624)
(XEN) ACPI: FACS DFAF4400, 0040
(XEN) ACPI: APIC DFAF1878, 00A0 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: SPCR DFAF191C, 0050 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: HPET DFAF1970, 0038 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: MCFG DFAF19AC, 003C (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: SLIC DFAF19EC, 0024 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: ERST DFADA8EC, 0210 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: HEST DFADAAFC, 027C (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: BERT DFADA76C, 0030 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: EINJ DFADA79C, 0150 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: SRAT 000FC144, 0150 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: SSDT DFAF4800, 0030 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) ACPI: TCPA DFAF1B70, 0064 (r1 DELL   PE_SC3          1 DELL        1)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-0000000120000000
(XEN) Xen heap: 14MB (14456kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.4 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[8e0,804], pm1x_evt[800,8f2]
(XEN) ACPI:                  wakeup_vec[dfaf440c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
(XEN) Processor #4 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
(XEN) Processor #1 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
(XEN) Processor #5 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] enabled)
(XEN) Processor #2 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
(XEN) Processor #6 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
(XEN) Processor #3 0:2 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 0:2 APIC version 16
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[32])
(XEN) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 32-47
(XEN) ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[64])
(XEN) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 64-79
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 3 I/O APICs
(XEN) ACPI: HPET id: 0x1166a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 1695.785 MHz processor.
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 0(4) -> Core 0
(XEN) AMD SVM: ASIDs enabled.
(XEN) HVM: SVM enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) CPU0: AMD Family10h machine check reporting enabled.
(XEN) CPU0: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Booting processor 1/4 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 1(4) -> Core 0
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU1: AMD Family10h machine check reporting enabled.
(XEN) CPU1: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Booting processor 2/1 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 2(4) -> Core 1
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU2: AMD Family10h machine check reporting enabled.
(XEN) CPU2: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Booting processor 3/5 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 3(4) -> Core 1
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU3: AMD Family10h machine check reporting enabled.
(XEN) CPU3: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Booting processor 4/2 eip 8c000
(XEN) Initializing CPU#4
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 4(4) -> Core 2
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU4: AMD Family10h machine check reporting enabled.
(XEN) CPU4: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Booting processor 5/6 eip 8c000
(XEN) Initializing CPU#5
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 5(4) -> Core 2
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU5: AMD Family10h machine check reporting enabled.
(XEN) CPU5: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Booting processor 6/3 eip 8c000
(XEN) Initializing CPU#6
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 6(4) -> Core 3
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU6: AMD Family10h machine check reporting enabled.
(XEN) CPU6: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Booting processor 7/7 eip 8c000
(XEN) Initializing CPU#7
(XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
(XEN) CPU: L2 Cache: 512K (64 bytes/line)
(XEN) CPU 7(4) -> Core 3
(XEN) AMD SVM: ASIDs enabled.
(XEN) CPU7: AMD Family10h machine check reporting enabled.
(XEN) CPU7: AMD Quad-Core AMD Opteron(tm) Processor 2344 HE stepping 03
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 8 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xffffffff80100000 memsz=0x9163a8
(XEN) elf_parse_binary: phdr: paddr=0xffffffff80b163c0 memsz=0x14bb60
(XEN) elf_parse_binary: memory: 0xffffffff80100000 -> 0xffffffff80c61f20

(XEN) elf_xen_parse: __xen_guest:"GUEST_OS=NetBSD,GUEST_VER=4.99,XEN_VER=xen-3.0,LOADER=generic,VIRT_BASE=0xffffffff80000000,ELF_PADDR_OFFSET=0xffffffff80000000,VIRT_ENTRY=0xffffffff80100000,HYPERCALL_PAGE=0x00000101,BSD_SYMTAB=yes"

(XEN) elf_xen_parse_guest_info: GUEST_OS="NetBSD"
(XEN) elf_xen_parse_guest_info: GUEST_VER="4.99"
(XEN) elf_xen_parse_guest_info: XEN_VER="xen-3.0"
(XEN) elf_xen_parse_guest_info: LOADER="generic"
(XEN) elf_xen_parse_guest_info: VIRT_BASE="0xffffffff80000000"
(XEN) elf_xen_parse_guest_info: ELF_PADDR_OFFSET="0xffffffff80000000"
(XEN) elf_xen_parse_guest_info: VIRT_ENTRY="0xffffffff80100000"
(XEN) elf_xen_parse_guest_info: HYPERCALL_PAGE="0x00000101"
(XEN) elf_xen_parse_guest_info: BSD_SYMTAB="yes"
(XEN) elf_xen_addr_calc_check: addresses:
(XEN)     virt_base        = 0xffffffff80000000
(XEN)     elf_paddr_offset = 0xffffffff80000000
(XEN)     virt_offset      = 0x0
(XEN)     virt_kstart      = 0xffffffff80100000
(XEN)     virt_kend        = 0xffffffff80d5f0f8
(XEN)     virt_entry       = 0xffffffff80100000
(XEN)  Xen  kernel: 64-bit, lsb, compat32

(XEN) Dom0 kernel: 64-bit, lsb, paddr 0xffffffff80100000 ->0xffffffff80c61f20

(XEN)  Dom0 symbol map 0xffffffff80c61f20 -> 0xffffffff80d5f0f8
(XEN) PHYSICAL MEMORY ARRANGEMENT:

(XEN) Dom0 alloc.: 000000011a000000->000000011c000000 (516096 pagesto be allocated)

(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: ffffffff80100000->ffffffff80d5f0f8
(XEN)  Init. ramdisk: ffffffff80d60000->ffffffff80d60000
(XEN)  Phys-Mach map: ffffffff80d60000->ffffffff81160000
(XEN)  Start info:    ffffffff81160000->ffffffff811604a4
(XEN)  Page tables:   ffffffff81161000->ffffffff8116e000
(XEN)  Boot stack:    ffffffff8116e000->ffffffff8116f000
(XEN)  TOTAL:         ffffffff80000000->ffffffff81400000
(XEN)  ENTRY ADDRESS: ffffffff80100000
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff80100000 -> 0xffffffff80a163a8
(XEN) elf_load_binary: phdr 1 at 0xffffffff80b163c0 -> 0xffffffff80b85980
(XEN) elf_load_bsdsyms: shdr 22 at 0xffff8300de90243e -> 0xffffffff80c625a8
(XEN) elf_load_bsdsyms: shdr 23 at 0xffff8300de902bd0 -> 0xffffffff80c62700
(XEN) elf_load_bsdsyms: shdr 24 at 0xffff8300de99aa18 -> 0xffffffff80cfa548
(XEN) Scrubbing Free RAM: ...................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All

(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switchinput to Xen)

(XEN) Freed 120kB init memory.

Loaded initial symtab at 0xffffffff80c61f24, strtab at0xffffffff80cfa548, # entries 25901

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007, 2008, 2009
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 5.99.7 (XEN3_DOM0) #1: Tue Jan 27 18:55:54 UTC 2009

mbowie%netbsd5-beta-amd64.dfw.fabriclabs.net@localhost:/usr/obj/sys/arch/amd64/compile/XEN3_DOM0

total memory = 2048 MB
avail memory = 1965 MB
SMBIOS rev. 2.4 @ 0xdfbbc000 (55 entries)
mainbus0 (root)
pmap_kenter_pa: pa 0x0 for va 0xffffa00048201000 outside range
pmap_kenter_pa: pa 0x9f000 for va 0xffffa00048201000 outside range
pmap_kenter_pa: pa 0x9e000 for va 0xffffa00048201000 outside range
pmap_kenter_pa: pa 0xf0000 for va 0xffffa00048201000 outside range
pmap_kenter_pa: pa 0xf1000 for va 0xffffa00048202000 outside range
pmap_kenter_pa: pa 0xf2000 for va 0xffffa00048203000 outside range
pmap_kenter_pa: pa 0xf3000 for va 0xffffa00048204000 outside range
pmap_kenter_pa: pa 0xf4000 for va 0xffffa00048205000 outside range
pmap_kenter_pa: pa 0xf5000 for va 0xffffa00048206000 outside range
pmap_kenter_pa: pa 0xf6000 for va 0xffffa00048207000 outside range
pmap_kenter_pa: pa 0xf7000 for va 0xffffa00048208000 outside range
pmap_kenter_pa: pa 0xf8000 for va 0xffffa00048209000 outside range
pmap_kenter_pa: pa 0xf9000 for va 0xffffa0004820a000 outside range
pmap_kenter_pa: pa 0xfa000 for va 0xffffa0004820b000 outside range
pmap_kenter_pa: pa 0xfb000 for va 0xffffa0004820c000 outside range
pmap_kenter_pa: pa 0xfc000 for va 0xffffa0004820d000 outside range
pmap_kenter_pa: pa 0xfd000 for va 0xffffa0004820e000 outside range
pmap_kenter_pa: pa 0xfe000 for va 0xffffa0004820f000 outside range
pmap_kenter_pa: pa 0xff000 for va 0xffffa00048210000 outside range
pmap_kenter_pa: pa 0xfe000 for va 0xffffa00048201000 outside range
pmap_kenter_pa: pa 0xf0000 for va 0xffffa00048202000 outside range
pmap_kenter_pa: pa 0xf0000 for va 0xffffa00048202000 outside range
cpu0 at mainbus0 apid 0: (boot processor)
cpu1 at mainbus0 apid 4: (application processor)
cpu2 at mainbus0 apid 1: (application processor)
cpu3 at mainbus0 apid 5: (application processor)
cpu4 at mainbus0 apid 2: (application processor)
cpu5 at mainbus0 apid 6: (application processor)
cpu6 at mainbus0 apid 3: (application processor)
cpu7 at mainbus0 apid 7: (application processor)
ioapic0 at mainbus0 apid 8, virtual wire mode
(XEN) io_apic.c:2213:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2213:
(XEN) ioapic_guest_write: apic=0, pin=3, old_irq=3, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f2, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
ioapic0: can't remap to apid 8
ioapic1 at mainbus0 apid 9, virtual wire mode
ioapic1: can't remap to apid 9
ioapic2 at mainbus0 apid 10, virtual wire mode
ioapic2: can't remap to apid 10
ipmi0 at mainbus0
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: AMD 686-class, 1695MHz, id 0x100f23
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
acpi0 at hypervisor0: Intel ACPICA 20080321
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 3
mpacpi: found subordinate bus 3 at level 4
mpacpi: found subordinate bus 5 at level 4
mpacpi: found subordinate bus 6 at level 4
mpacpi: found subordinate bus 9 at level 2
mpacpi: found subordinate bus 11 at level 2
mpacpi: found subordinate bus 12 at level 2
mpacpi: found subordinate bus 13 at level 2
mpacpi: 10 PCI busses
mpacpi: ISA interrupt override 0 -> 2 (0/0)
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 3 int routing
mpacpi: configuring PCI bus 5 int routing
mpacpi: configuring PCI bus 6 int routing
mpacpi: configuring PCI bus 9 int routing
mpacpi: configuring PCI bus 11 int routing
mpacpi: configuring PCI bus 12 int routing
mpacpi: configuring PCI bus 13 int routing

ioapic0: pin 2 attached to isa0 irq 0 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 1 attached to isa0 irq 1 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 3 attached to isa0 irq 3 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 4 attached to isa0 irq 4 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 5 attached to isa0 irq 5 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 6 attached to isa0 irq 6 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 7 attached to isa0 irq 7 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 8 attached to isa0 irq 8 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 9 attached to isa0 irq 9 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 10 attached to isa0 irq 10 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 11 attached to isa0 irq 11 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 12 attached to isa0 irq 12 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 13 attached to isa0 irq 13 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 14 attached to isa0 irq 14 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)ioapic0: pin 15 attached to isa0 irq 15 (type 0x0<type=0x0> flags0x0<pol=0x0,trig=0x0>)local apic: pin 1 attached to NMI (type 0x1<type=0x1=NMI> flags0x0<pol=0x0,trig=0x0>)linkdev LK01 attached to pci0 device 3 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)linkdev LK01 attached to pci0 device 3 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)linkdev LK01 attached to pci0 device 3 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)linkdev LK01 attached to pci0 device 3 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 0 attached to pci0 device 7 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 1 attached to pci0 device 8 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci0 device 9 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 3 attached to pci0 device 10 INT_A (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 4 attached to pci0 device 11 INT_A (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 7 attached to pci0 device 4 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci1 device 0 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci1 device 0 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci1 device 0 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci1 device 0 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 1 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 1 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 1 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 1 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 2 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 2 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 2 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 2 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 3 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 3 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 3 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci2 device 3 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci3 device 0 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci3 device 0 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci3 device 0 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci3 device 0 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci5 device 0 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci5 device 0 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci5 device 0 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci5 device 0 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci6 device 0 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci6 device 0 INT_B (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci6 device 0 INT_C (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 5 attached to pci6 device 0 INT_D (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)linkdev LK07 attached to pci9 device 14 INT_A (type 0x0<type=0x0> flags0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 0 attached to pci11 device 0 INT_A (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 0 attached to pci11 device 0 INT_B (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 0 attached to pci11 device 0 INT_C (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 0 attached to pci11 device 0 INT_D (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 1 attached to pci12 device 0 INT_A (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 1 attached to pci12 device 0 INT_B (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 1 attached to pci12 device 0 INT_C (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 1 attached to pci12 device 0 INT_D (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 3 attached to pci13 device 0 INT_A (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 3 attached to pci13 device 0 INT_B (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 3 attached to pci13 device 0 INT_C (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic1: pin 3 attached to pci13 device 0 INT_D (type 0x0<type=0x0>flags 0xf<pol=0x3=Act Lo,trig=0x3=Level>)ioapic0: int90x1a998<vector=0x98,delmode=0x1,logical,actlo,level,masked,dest=0x0>0xff000000<target=0xff>

pcppi0 at acpi0 (SPK, PNP0800)
pcppi0: io 0x61
TMR (PNP0100) [AT Timer] at acpi0 not configured
COMA (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COMB (PNP0501) [16550A-compatible COM port] at acpi0 not configured
HPET (PNP0103) [HPET Timer] at acpi0 not configured
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
ppb0 at pci0 dev 1 function 0: vendor 0x1166 product 0x0036 (rev. 0x00)
pci1 at ppb0 bus 9
ppb0: added to list as bus 9
ppb1 at pci1 dev 13 function 0: vendor 0x1166 product 0x0104 (rev. 0xc0)
pci2 at ppb1 bus 10
ppb1: added to list as bus 10
svwsata0 at pci1 dev 14 function 0
svwsata0: ServerWorks HT-1000 SATA Controller (rev. 0x00)
linkdev LK07 returned ACPI global irq 11, line 11

ioapic0: int110x1a9a0<vector=0xa0,delmode=0x1,logical,actlo,level,masked,dest=0x0>0xff000000<target=0xff>

svwsata0: using ioapic0 pin 11, event channel 4 for native-PCI interrupt
atabus0 at svwsata0 channel 0
atabus1 at svwsata0 channel 1
atabus2 at svwsata0 channel 2
atabus3 at svwsata0 channel 3
pchb0 at pci0 dev 2 function 0
pchb0: vendor 0x1166 product 0x0205 (rev. 0x00)
pcib0 at pci0 dev 2 function 2
pcib0: vendor 0x1166 product 0x0234 (rev. 0x00)
ohci0 at pci0 dev 3 function 0: vendor 0x1166 product 0x0223 (rev. 0x01)
linkdev LK01 returned ACPI global irq 11, line 11
ohci0: interrupting at ioapic0 pin 11, event channel 4
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 3 function 1: vendor 0x1166 product 0x0223 (rev. 0x01)
linkdev LK01 returned ACPI global irq 11, line 11
ohci1: interrupting at ioapic0 pin 11, event channel 4
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 3 function 2: vendor 0x1166 product 0x0223 (rev. 0x01)
linkdev LK01 returned ACPI global irq 11, line 11
ehci0: interrupting at ioapic0 pin 11, event channel 4
ehci0: companion controllers, 2 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
vga0 at pci0 dev 4 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1
drm at vga0 not configured
ppb2 at pci0 dev 7 function 0: vendor 0x1166 product 0x0140 (rev. 0xa2)
pci3 at ppb2 bus 11
ppb2: added to list as bus 11
ppb3 at pci0 dev 8 function 0: vendor 0x1166 product 0x0142 (rev. 0xa2)
pci4 at ppb3 bus 12
ppb3: added to list as bus 12
ppb4 at pci0 dev 9 function 0: vendor 0x1166 product 0x0144 (rev. 0xa2)
pci5 at ppb4 bus 1
ppb4: added to list as bus 1
ppb5 at pci5 dev 0 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci6 at ppb5 bus 2
ppb5: added to list as bus 2
ppb6 at pci6 dev 1 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci7 at ppb6 bus 3
ppb6: added to list as bus 3
ppb7 at pci7 dev 0 function 0: vendor 0x1166 product 0x0103 (rev. 0xc3)
ppb7: disabling notification events
pci8 at ppb7 bus 4
ppb7: added to list as bus 4
bnx0 at pci8 dev 0 function 0: Broadcom NetXtreme II BCM5708 1000Base-T

ioapic1: int50x1a9a8<vector=0xa8,delmode=0x1,logical,actlo,level,masked,dest=0x0>0xff000000<target=0xff>

bnx0: Ethernet address 00:22:19:53:d8:a3
brgphy0 at bnx0 phy 1: BCM5708C 1000BASE-T media interface, rev. 6

brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,1000baseT-FDX, auto

ppb8 at pci6 dev 2 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci9 at ppb8 bus 5
ppb8: added to list as bus 5
ppb9 at pci6 dev 3 function 0: vendor 0x10b5 product 0x8518 (rev. 0xac)
pci10 at ppb9 bus 6
ppb9: added to list as bus 6
ppb10 at pci10 dev 0 function 0: vendor 0x8086 product 0x0370 (rev. 0x00)
ppb10: disabling notification events
pci11 at ppb10 bus 7
ppb10: added to list as bus 7
mfi0 at pci11 dev 14 function 0: Dell PERC 5/i integrated
mfi0: interrupting at ioapic1 pin 5, event channel 5
mfi0: logical drives 1, version 5.2.2-0072, 256MB RAM
scsibus0 at mfi0: 64 targets, 8 luns per target
ppb11 at pci10 dev 0 function 2: vendor 0x8086 product 0x0372 (rev. 0x00)
ppb11: disabling notification events
pci12 at ppb11 bus 8
ppb11: added to list as bus 8
ppb12 at pci0 dev 10 function 0: vendor 0x1166 product 0x0142 (rev. 0xa2)
pci13 at ppb12 bus 13
ppb12: added to list as bus 13
ppb13 at pci0 dev 11 function 0: vendor 0x1166 product 0x0144 (rev. 0xa2)
pci14 at ppb13 bus 14
ppb13: added to list as bus 14
pchb1 at pci0 dev 24 function 0
pchb1: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp0 at pci0 dev 24 function 3
amdtemp0: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb4 at pci0 dev 24 function 4
pchb4: vendor 0x1022 product 0x1204 (rev. 0x00)
pchb5 at pci0 dev 25 function 0
pchb5: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb6 at pci0 dev 25 function 1
pchb6: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb7 at pci0 dev 25 function 2
pchb7: vendor 0x1022 product 0x1202 (rev. 0x00)
amdtemp1 at pci0 dev 25 function 3
amdtemp1: AMD CPU Temperature Sensors (Family10h / Family11h)
pchb8 at pci0 dev 25 function 4
pchb8: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
Link Device LK01:
Index  IRQ  Rtd  Ref  IRQs
   0   11   Y     4  3 4 5 6 7 10 11 12 14 polarity 1 trigger 0

Link Device LK07:
Index  IRQ  Rtd  Ref  IRQs
   0   11   Y     1  3 4 5 6 7 10 11 12 14 polarity 1 trigger 0

scsibus0: waiting 2 seconds for devices to settle...
uhub0 at usb0: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 0x1166 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2 at usb2: vendor 0x1166 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
svwsata0 port 1: device present, speed: 1.5Gb/s
svwsata0 port 2: PHY offline
svwsata0 port 3: PHY offline
svwsata0 port 0: PHY offline
atapibus0 at atabus1: 2 targets

cd0 at atapibus0 drive 0: <TEAC DVD-ROM DV28SV, 08092215145441, D.0J>cdrom removableuhub3 at uhub2 port 1: vendor 0x413c product 0xa001, class 9/0, rev2.00/0.00, addr 2

uhub3: multiple transaction translators
sd0 at scsibus0 target 0 lun 0: <DELL, PERC 5/i, 1.03> disk fixed
sd0: fabricating a geometry

sd0: 929 GB, 951808 cyl, 64 head, 32 sec, 512 bytes/sect x 1949302784sectors

uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0 mux 1
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: Dell DRAC5, rev 1.10/0.00, addr 3, iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported

uhub4 at uhub2 port 4: vendor 0x04b4 product 0x6560, class 9/0, rev2.00/0.0b, addr 4

uhub4: multiple transaction translators

uhub5 at uhub4 port 1: vendor 0x04b4 product 0x6560, class 9/0, rev2.00/0.0b, addr 5

uhub5: multiple transaction translators

raidattach: Asked for 8 units
Kernelized RAIDframe activated
Searching for RAID components...
sd0: fabricating a geometry
boot device: sd0
root on sd0a dumps on sd0b
mountroot: trying smbfs...
mountroot: trying ntfs...
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying lfs...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
init: copying out path `/sbin/init' 11
mfi0: normal state on 'mfi0:0' (online)
Wed Jan 28 08:19:31 UTC 2009
swapctl: adding /dev/sd0b as swap device at priority 0
Starting file system checks:
/dev/rsd0a: file system is clean; not checking

Follow-Ups:
- Re: bnx driver in 5.99.7 panics under xen 3.3.1
  - From: Mike Bowie

References:
- bnx driver in 5.99.7 panics under xen 3.3.1
  - From: Mike Bowie
- Re: bnx driver in 5.99.7 panics under xen 3.3.1
  - From: Manuel Bouyer

Prev by Date: Re: bnx driver in 5.99.7 panics under xen 3.3.1
Next by Date: Re: bnx driver in 5.99.7 panics under xen 3.3.1
Previous by Thread: Re: bnx driver in 5.99.7 panics under xen 3.3.1
Next by Thread: Re: bnx driver in 5.99.7 panics under xen 3.3.1
Indexes:

Home | Main Index | Thread Index | Old Index