Port-xen archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: XEN and cardbus
On 01/25/2010 04:45 PM, Manuel Bouyer wrote:
On Mon, Jan 25, 2010 at 10:20:08AM +0100, Juraj Hercek wrote:
Is there some other, way to enable ioapic?
Not that I know. This would mean that on this platform, the kernel
can't find the ioapic (or it doesn't have one but I believe all
CPUs capable of running Xen do have an ioapic).
Can you boot a GENERIC kernel and send the dmesg (and test if the
cardbus slot is working or not) ?
Sure, I used modified MONOLITHIC, which includes GENERIC - I have an
issue booting GENERIC from grub and didn't have moral power to fight
with that. For completeness (and reference), I attached also Xen3
files. I disabled all unnecessary HW in BIOS in order to minimize
output this time. Thank you for looking at it.
-- Juraj
include "arch/i386/conf/MONOLITHIC"
options PCI_BUS_FIXUP
multiboot: Information structure flags: 0x000003e7
multiboot: Boot loader: GNU GRUB 0.97
multiboot: Command line: (hd0,0)/kernels/netbsd/netbsd-MONOLITHIC_CARDBUS.gz ro
console=com0,speed=115200
multiboot: 636 KB lower memory, 1571512 KB upper memory
multiboot: Symbol table at 0xc0b9a07c, length 530928 bytes
multiboot: String table at 0xc0c1ba6c, length 515460 bytes
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.22 (MONOLITHIC_CARDBUS) #1: Tue Jan 26 10:15:34 CET 2010
builder@dump:/os/netbsd/build/netbsd-i386/obj/sys/arch/i386/compile/MONOLITHIC_CARDBUS
total memory = 1535 MB
avail memory = 1496 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Dell Computer Corporation Precision M60
mainbus0 (root)
cpu0 at mainbus0: Intel 686-class, 1993MHz, id 0x6d6
acpi0 at mainbus0: Intel ACPICA 20090730
acpi0: X/RSDT: OemId <DELL , CPi R ,27d5061e>, AslId <ASL ,00000061>
LNKA: ACPI: Found matching pin for 0.31.INTA at func 1: 0
LNKB: ACPI: Found matching pin for 0.31.INTB at func 5: 11
LNKB: BIOS IRQ 11 for 0.31.INTB is invalid
LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 11
LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 11
LNKH: ACPI: Found matching pin for 0.29.INTD at func 7: 11
LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 11
LNKD: ACPI: Found matching pin for 2.1.INTA at func 0: 11
LNKC: ACPI: Found matching pin for 2.0.INTA at func 0: 11
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
9 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
10 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
11 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
12 (20090730/nsrepair-215)
acpibat0: battery info: SMP, LION, DELL Y1635 1179
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (KBC, PNP0303) (kbd port): io 0x60,0x64 irq 1
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61,0x63,0x65,0x67
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
UAR1 (PNP0501) at acpi0 not configured
acpitz0 at acpi0 (THM): critical 90.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x3340 (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x3341 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x10de product 0x034c (rev. 0xa1)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x01)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x01)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x01)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x01)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
bge0 at pci2 dev 0 function 0: Broadcom BCM5705M Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5705 A1 (0x3001), Ethernet address 00:11:22:33:44:55
bge0: setting short Tx thresholds
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
cbb0 at pci2 dev 1 function 0: vendor 0x104c product 0xac47 (rev. 0x01)
cbb1 at pci2 dev 1 function 1: vendor 0x104c product 0xac4a (rev. 0x01)
fwohci0 at pci2 dev 1 function 2: vendor 0x104c product 0x802b (rev. 0x00)
fwohci0: interrupting at irq 11
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:22:33:44:55:66:77
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
vendor 0x104c product 0x8204 (miscellaneous system) at pci2 dev 1 function 3
not configured
cbb0: cacheline 0x8 lattimer 0x20
cbb0: bhlc 0x822008
cbb0: interrupting at irq 11
cardslot0 at cbb0
cardbus0 at cardslot0: bus 3
pcmcia0 at cardslot0
cbb1: cacheline 0x8 lattimer 0x20
cbb1: bhlc 0x822008
cbb1: interrupting at irq 11
cardslot1 at cbb1
cardbus1 at cardslot1: bus 4
pcmcia1 at cardslot1
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x24cc (rev. 0x01)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ichlpcib0: SpeedStep enabled
gpiobus at ichlpcib0 not configured
piixide0 at pci0 dev 31 function 1: Intel 82801DBM IDE Controller (ICH4-M)
(rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
LNKB: Picked IRQ 9 with weight 0
auich0: interrupting at irq 9
auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC,
SigmaTel 3D
auich0: ac97: ext id 0x605<AC97_22,AMAP,SPDIF,VRA>
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
acpiacad0: AC adapter online.
auich0: measured ac97 link rate at 47996 Hz, will use 48000 Hz
audio0 at auich0: full duplex, playback, capture, mmap, independent
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
rtk0 at cardbus0 function 0: Realtek 8139 10/100BaseTX
rtk0: Ethernet address 00:10:20:30:40:50
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wd0 at atabus0 drive 0: <SAMSUNG HM160HC>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-ST DVD+RW GCA-4040N, , C110> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
include "arch/i386/conf/XEN3PAE_DOM0"
#options PCI_ADDR_FIXUP
#options PCI_INTR_FIXUP
#options PCI_INTR_FIXUP_DISABLED
options PCI_BUS_FIXUP
options RBUS_MIN_START="0x80000000"
cbb* at pci? dev? function ?
cardslot* at cbb?
cardbus* at cardslot?
pcmcia* at cardslot?
siisata* at cardbus? function ?
rtk* at cardbus? function ?
re* at cardbus? function ?
root (hd0,1,a)
Filesystem type is ffs, partition type 0xa9
kernel (hd0,0)/kernels/xen/3.3.2/xen-debug.gz dom0_mem=524288 lapic cpuidle cpu
freq=dom0-kernel loglvl=all console=com1 com1=115200,8n1
[Multiboot-elf, <0x100000:0xf750c:0x65af4>, shtab=0x25d078, entry=0x100000]
module (hd0,0)/kernels/netbsd/netbsd-XEN3PAE_DOM0_CARDBUS.gz ro console=com1,sp
eed=115200
[Multiboot-module @ 0x25e000, 0xa979c1 bytes]
__ __ _____ _____ ____
\ \/ /___ _ __ |___ / |___ / |___ \
\ // _ \ '_ \ |_ \ |_ \ __) |
/ \ __/ | | | ___) | ___) | / __/
/_/\_\___|_| |_| |____(_)____(_)_____|
(XEN) Xen version 3.3.2 (juraj@localdomain) (gcc version 4.4.2 (GCC) ) Mon Nov
30 21:36:01 CET 2009
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: dom0_mem=524288 lapic cpuidle cpufreq=dom0-kernel
loglvl=all console=com1 com1=115200,8n1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 0000000000100000 - 000000005ffae000 (usable)
(XEN) 000000005ffae000 - 0000000060000000 (reserved)
(XEN) 00000000feda0000 - 00000000fee00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) System RAM: 1535MB (1572148kB)
(XEN) ACPI: RSDP 000FDF00, 0014 (r0 DELL )
(XEN) ACPI: RSDT 5FFF0000, 002C (r1 DELL CPi R 27D5061E ASL 61)
(XEN) ACPI: FACP 5FFF0400, 0074 (r1 DELL CPi R 27D5061E ASL 61)
(XEN) ACPI: DSDT 5FFF0C00, 2E30 (r1 INT430 SYSFexxx 1001 MSFT 100000E)
(XEN) ACPI: FACS 5FFFF800, 0040
(XEN) ACPI: ASF! 5FFF0800, 005B (r16 DELL CPi R 27D5061E ASL 61)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000005ffae000
(XEN) Xen heap: 9MB (9796kB)
(XEN) Domain heap initialised
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[5ffff80c], vec_size[20]
(XEN) Local APIC disabled by BIOS -- reenabling.
(XEN) Found and enabled local APIC!
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 1993.563 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Setting frequency MHz: 600, voltage mV: 700
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Pentium(R) M processor 2.00GHz stepping 06
(XEN) SMP motherboard not detected.
(XEN) Platform timer is 3.579MHz ACPI PM Timer
(XEN) Brought up 1 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0xc0100000 memsz=0x910fe0
(XEN) elf_parse_binary: phdr: paddr=0xc0a12000 memsz=0x10651c
(XEN) elf_parse_binary: memory: 0xc0100000 -> 0xc0b1851c
(XEN) elf_xen_parse: __xen_guest:
"GUEST_OS=netbsd,GUEST_VER=3.0,XEN_VER=xen-3.0,VIRT_BASE=0xc0000000,ELF_PADDR_OFFSET=0xc0000000,VIRT_ENT"
(XEN) elf_xen_parse_guest_info: GUEST_OS="netbsd"
(XEN) elf_xen_parse_guest_info: GUEST_VER="3.0"
(XEN) elf_xen_parse_guest_info: XEN_VER="xen-3.0"
(XEN) elf_xen_parse_guest_info: VIRT_BASE="0xc0000000"
(XEN) elf_xen_parse_guest_info: ELF_PADDR_OFFSET="0xc0000000"
(XEN) elf_xen_parse_guest_info: VIRT_ENTRY="0xc0100000"
(XEN) elf_xen_parse_guest_info: HYPERCALL_PAGE="0x00000101"
(XEN) elf_xen_parse_guest_info: PAE="yes[extended-cr3]"
(XEN) elf_xen_parse_guest_info: LOADER="generic"
(XEN) elf_xen_parse_guest_info: BSD_SYMTAB="yes"
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xc0000000
(XEN) elf_paddr_offset = 0xc0000000
(XEN) virt_offset = 0x0
(XEN) virt_kstart = 0xc0100000
(XEN) virt_kend = 0xc0bf3888
(XEN) virt_entry = 0xc0100000
(XEN) Xen kernel: 32-bit, PAE, lsb
(XEN) Dom0 kernel: 32-bit, PAE, lsb, paddr 0xc0100000 -> 0xc0b1851c
(XEN) Dom0 symbol map 0xc0b1851c -> 0xc0bf3888
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 000000003e000000->000000003f000000 (126976 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c0bf3888
(XEN) Init. ramdisk: c0bf4000->c0bf4000
(XEN) Phys-Mach map: c0bf4000->c0c74000
(XEN) Start info: c0c74000->c0c74474
(XEN) Page tables: c0c75000->c0c82000
(XEN) Boot stack: c0c82000->c0c83000
(XEN) TOTAL: c0000000->c1000000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xc0100000 -> 0xc0a10fe0
(XEN) elf_load_binary: phdr 1 at 0xc0a12000 -> 0xc0a88014
(XEN) elf_load_bsdsyms: shdr 28 at 0x3ff2468f -> 0xc0b18a2c
(XEN) elf_load_bsdsyms: shdr 29 at 0x3ff24d0c -> 0xc0b18bd0
(XEN) elf_load_bsdsyms: shdr 30 at 0x3ff93cac -> 0xc0b87b70
(XEN) Scrubbing Free RAM: .........done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 96kB init memory.
Loaded initial symtab at 0xc0b18520, strtab at 0xc0b87b70, # entries 26816
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 5.99.22 (XEN3PAE_DOM0_CARDBUS) #0: Tue Jan 26 11:38:18 CET 2010
builder@dump:/os/netbsd/build/netbsd-i386/obj/sys/arch/i386/compile/XEN3PAE_DOM0_CARDBUS
total memory = 512 MB
avail memory = 489 MB
mainbus0 (root)
pmap_kenter_pa: pa 0x0 for va 0xcac7f000 outside range
pmap_kenter_pa: pa 0x9f000 for va 0xcac7f000 outside range
pmap_kenter_pa: pa 0x9e000 for va 0xcac7f000 outside range
pmap_kenter_pa: pa 0xf0000 for va 0xcae3c000 outside range
pmap_kenter_pa: pa 0xf1000 for va 0xcae3d000 outside range
pmap_kenter_pa: pa 0xf2000 for va 0xcae3e000 outside range
pmap_kenter_pa: pa 0xf3000 for va 0xcae3f000 outside range
pmap_kenter_pa: pa 0xf4000 for va 0xcae40000 outside range
pmap_kenter_pa: pa 0xf5000 for va 0xcae41000 outside range
pmap_kenter_pa: pa 0xf6000 for va 0xcae42000 outside range
pmap_kenter_pa: pa 0xf7000 for va 0xcae43000 outside range
pmap_kenter_pa: pa 0xf8000 for va 0xcae44000 outside range
pmap_kenter_pa: pa 0xf9000 for va 0xcae45000 outside range
pmap_kenter_pa: pa 0xfa000 for va 0xcae46000 outside range
pmap_kenter_pa: pa 0xfb000 for va 0xcae47000 outside range
pmap_kenter_pa: pa 0xfc000 for va 0xcae48000 outside range
pmap_kenter_pa: pa 0xfd000 for va 0xcae49000 outside range
pmap_kenter_pa: pa 0xfe000 for va 0xcae4a000 outside range
pmap_kenter_pa: pa 0xff000 for va 0xcae4b000 outside range
cpu0 at mainbus0: (uniprocessor)
hypervisor0 at mainbus0: Xen version 3.3
vcpu0 at hypervisor0: Intel 686-class, 598MHz, id 0x6d6
xenbus0 at hypervisor0: Xen Virtual Bus Interface
xencons0 at hypervisor0: Xen Virtual Console Driver
npx0 at hypervisor0: using exception 16
acpi0 at hypervisor0: Intel ACPICA 20090730
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: 3 PCI busses
mpacpi: configuring PCI bus 0 int routing
LNKB: BIOS IRQ 11 for 0.31.INTB is invalid
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
pic0: pin 0 attached to isa0 irq 0 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 1 attached to isa0 irq 1 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 3 attached to isa0 irq 3 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 4 attached to isa0 irq 4 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 5 attached to isa0 irq 5 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 6 attached to isa0 irq 6 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 7 attached to isa0 irq 7 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 8 attached to isa0 irq 8 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 9 attached to isa0 irq 9 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 10 attached to isa0 irq 10 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 11 attached to isa0 irq 11 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 12 attached to isa0 irq 12 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 13 attached to isa0 irq 13 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 14 attached to isa0 irq 14 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
pic0: pin 15 attached to isa0 irq 15 (type 0x0<type=0x0> flags
0x0<pol=0x0,trig=0x0>)
linkdev LNKA attached to pci0 device 31 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci0 device 31 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKC attached to pci0 device 31 INT_C (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci0 device 31 INT_D (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKA attached to pci0 device 29 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci0 device 29 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKC attached to pci0 device 29 INT_C (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKH attached to pci0 device 29 INT_D (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKA attached to pci0 device 1 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci0 device 1 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKA attached to pci1 device 0 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci2 device 1 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci2 device 1 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci2 device 3 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKD attached to pci2 device 3 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKC attached to pci2 device 0 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci2 device 8 INT_A (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
linkdev LNKB attached to pci2 device 8 INT_B (type 0x0<type=0x0> flags
0xf<pol=0x3=Act Lo,trig=0x3=Level>)
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT0, PNP0C0A-1): ACPI Battery (Control Method)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
9 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
10 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
11 (20090730/nsrepair-215)
ACPI Warning for \_SB_.BAT0._BIF: Converted Buffer to expected String at index
12 (20090730/nsrepair-215)
acpibat1 at acpi0 (BAT1, PNP0C0A-2): ACPI Battery (Control Method)
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PBTN, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SBTN, PNP0C0E): ACPI Sleep Button
PS2M (PNP0F13) [PS/2 Port for PS/2-style Mice] at acpi0 not configured
KBC (PNP0303) [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not
configured
TMR (PNP0100) [AT Timer] at acpi0 not configured
SPKR (PNP0800) [AT-style speaker sound] at acpi0 not configured
COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured
UAR1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
THM (ACPI Object Type 'Thermal' [0x0d]) at acpi0 not configured
pci0 at hypervisor0 bus 0: configuration mode 1
hypervisor0: added to list as bus 0
pchb0 at pci0 dev 0 function 0: Intel 82855PM MCH Host Controller (rev. 0x03)
agp0 at pchb0: aperture at 0xe0000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Intel 82855PM Host-AGP Bridge (rev. 0x03)
pci1 at ppb0 bus 1
ppb0: added to list as bus 1
vga0 at pci1 dev 0 function 0: NVIDIA product 0x034c (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1
drm at vga0 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801DB USB UHCI Controller (rev. 0x01)
linkdev LNKA returned ACPI global irq 11, line 11
uhci0: interrupting at irq 11, event channel 4
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: Intel 82801DB USB UHCI Controller (rev. 0x01)
linkdev LNKD returned ACPI global irq 11, line 11
uhci1: interrupting at irq 11, event channel 4
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: Intel 82801DB USB UHCI Controller (rev. 0x01)
linkdev LNKC returned ACPI global irq 11, line 11
uhci2: interrupting at irq 11, event channel 4
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: Intel 82801DB USB EHCI Controller (rev. 0x01)
linkdev LNKH returned ACPI global irq 11, line 11
ehci0: interrupting at irq 11, event channel 4
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
xen_alloc_contig: XENMEM_decrease_reservation failed!
usb3 at ehci0: USB revision 2.0
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
ppb1: added to list as bus 2
bge0 at pci2 dev 0 function 0: Broadcom BCM5705M Gigabit Ethernet
linkdev LNKC returned ACPI global irq 11, line 11
bge0: interrupting at irq 11, event channel 4
bge0: ASIC BCM5705 A1 (0x3001), Ethernet address 00:11:22:33:44:55
brgphy0 at bge0 phy 1: BCM5705 1000BASE-T media interface, rev. 1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
cbb0 at pci2 dev 1 function 0: Texas Instruments PCI7510 PCI-CardBus Bridge w/
IEEE 1394 Host Controller (rev. 0x01)
cbb1 at pci2 dev 1 function 1: Texas Instruments PCI7610 PCI-CardBus Bridge
(Smart Card Mode) (rev. 0x01)
fwohci0 at pci2 dev 1 function 2: Texas Instruments PCI7[4-6]10 IEEE 1394 Host
Controller w/ PCI-CardBus Bridge (rev. 0x00)
linkdev LNKD returned ACPI global irq 11, line 11
fwohci0: interrupting at irq 11, event channel 4
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:22:33:44:55:66:77
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
Texas Instruments product 0x8204 (miscellaneous system) at pci2 dev 1 function
3 not configured
linkdev LNKD returned ACPI global irq 11, line 11
panic: Failed to bind physical IRQ 255
fatal breakpoint trap in supervisor mode
trap type 1 code 0 eip c021bec4 cs 9 eflags 246 cr2 0 ilevel 8
Stopped in pid 0.1 (system) at netbsd:breakpoint+0x4: popl %ebp
db> bt
breakpoint(c0a05932,c0c85604,c0a23e00,c063ed3b,c09c7a6c,5,0,0,c0c85604,c0c85618)
at netbsd:breakpoint+0x4
panic(c09928ec,ff,b,b,c0c85620,2,ff,1,3,3) at netbsd:panic+0x1d8
bind_pirq_to_evtch(ff,8002083c,c0c85678,c0566530,8,0,0,0,0,0) at netbsd:bind_pir
q_to_evtch+0x92
xen_intr_map(c0c85704,3,c0c85704,c0c856b4,c0c856b0,ffffffff,c0c856c8,4,0,1000000
) at netbsd:xen_intr_map+0xeb
pci_intr_map(caeeee54,c0c85704,0,0,c0c85728,8002080c,c0c85718,c055f5be,1,cb3fe00
0) at netbsd:pci_intr_map+0x114
pccbb_intrinit(caf3c004,c09cff5e,822008,20,fff,0,1000,0,0,c0c857b0) at netbsd:pc
cbb_intrinit+0x32
pccbb_pci_callback(caf3c004,0,c0a81a3c,c0a16e40,c0973567,0,c0c85818,c062f176,caf
05c3c,caf05c3c) at netbsd:pccbb_pci_callback+0x273
config_process_deferred(caf05c3c,caf05c3c,c0c8585c,0,c0c8585c,caeee804,caf05c3c,
c097365f,c056b960,caeee804) at netbsd:config_process_deferred+0x44
config_attach_loc(caeee804,c0a15e20,0,c0c8585c,c056b960,0,c0c85998,c0587029,caee
e804,c097365f) at netbsd:config_attach_loc+0x1a6
config_found_ia(caeee804,c097365f,c0c8585c,c056b960,100,caeb4f04,c0c85ba8,c05652
7c,0,1) at netbsd:config_found_ia+0x32
ppbattach(cae6dc3c,caeee804,c0c859fc,c0c85a38,c0c859fc,8000f000,caeee804,cae6900
4,c0973567,c0565200) at netbsd:ppbattach+0x1a9
config_attach_loc(cae6dc3c,c0a16120,c0c85a38,c0c859fc,c0565200,c062d470,c0c85a78
,24488086,80800107,10000) at netbsd:config_attach_loc+0x176
pci_probe_device(cae69004,8000f000,0,0,0,c0933794,c0c85ba8,1,0,8000f000) at netb
sd:pci_probe_device+0x272
pci_enumerate_bus(cae69004,c0933790,0,0,cae6dc3c,cae6dc3c,cae69004,c0973567,c093
3790,c0565450) at netbsd:pci_enumerate_bus+0x187
pcirescan(cae6dc3c,c0973567,c0933790,c063f386,cae2a028,c056b960,cae6dc3c,cae6900
4,2,0) at netbsd:pcirescan+0x5a
pciattach(cae2a00c,cae6dc3c,c0c85b74,0,c0c85b74,0,cae6dc3c,c0c85b74,cae2a00c,0)
a
t netbsd:pciattach+0x18e
config_attach_loc(cae2a00c,c0a15df0,0,c0c85b74,c056b960,0,c0c85ba8,c02dd7be,cae2
a00c,c097365f) at netbsd:config_attach_loc+0x176
config_found_ia(cae2a00c,c097365f,c0c85b74,c056b960,c0c85bb4,0,0,1,c0a800a0,0) a
t netbsd:config_found_ia+0x32
hypervisor_attach(cae339dc,cae2a00c,c0c85c24,0,c0c85c24,c0c85c48,cae2a00c,cae339
dc,c0c85c24,c0c85c48) at netbsd:hypervisor_attach+0x14e
config_attach_loc(cae339dc,c0a15d18,0,c0c85c24,c04c9350,0,c0c85c58,c04c9423,cae3
39dc,c097363e) at netbsd:config_attach_loc+0x176
config_found_ia(cae339dc,c097363e,c0c85c24,c04c9350,c09e7a87,5,0,0,c0c85c64,c097
306e) at netbsd:config_found_ia+0x32
mainbus_attach(0,cae339dc,0,c062d66e,c0973066,c0973066,cae339dc,0,c0973066,0) at
netbsd:mainbus_attach+0xa3
config_attach_loc(0,c0a15d00,0,0,0,0,c0c85cc8,c062f3c4,0,c0a15d00) at netbsd:con
fig_attach_loc+0x176
config_attach(0,c0a15d00,0,0,c0a23e00,c86000,c0c85ce8,c01ce697,c0973066,0) at ne
tbsd:config_attach+0x2c
config_rootfound(c0973066,0,0,8,c1639800,c0a23e00,c0c85d38,c03eaa1e,c0acc940,a)
a
t netbsd:config_rootfound+0x44
cpu_configure(c0acc940,a,14,1f376,0,0,0,6000,0,c8a) at netbsd:cpu_configure+0x27
main(c0100063,c010006b,0,0,0,0,0,0,0,0) at netbsd:main+0x22e
db>
Home |
Main Index |
Thread Index |
Old Index