Re: XEN on NetBSD-6.1 amd64.

[Adiel de Lima Ribeiro <adiel.netadmin%gmail.com@localhost>]

On Thu, 2013-08-01 at 21:18 +0200, Manuel Bouyer wrote:
> On Thu, Aug 01, 2013 at 04:08:52PM -0300, Adiel de Lima Ribeiro wrote:
> > On Thu, 2013-08-01 at 20:56 +0200, Manuel Bouyer wrote:
> > > On Thu, Aug 01, 2013 at 03:54:40PM -0300, Adiel de Lima Ribeiro wrote:
> > > > With /sbin and /usr/sbin in PATH, the ifconfig: not found message
> > > > disappears from log, but stil haven't communication with the network.
> > > 
> > > and can you post the brconfig -a output now ?
> > > 
> > 
> > Yeah!
> > 
> > ifconfig -a:
> > 
> > bce0:
> > flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu
> > 1500
> >         address: 00:18:8b:e1:67:47
> >         media: Ethernet autoselect (100baseTX
> > full-duplex,flowcontrol,rxpause,txpause)
> >         status: active
> >         inet 192.168.254.126 netmask 0xffffff00 broadcast
> > 192.168.254.255
> > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33648
> >         inet 127.0.0.1 netmask 0xff000000
> > bridge0: flags=0 mtu 1500
> > tap0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
> > 1500
> >         address: f2:0b:a4:74:d8:0d
> >         media: Ethernet autoselect
> > xvif10i0: flags=8923<UP,BROADCAST,NOTRAILERS,PROMISC,SIMPLEX,MULTICAST>
> > mtu 1500
> >         capabilities=2800<TCP4CSUM_Tx,UDP4CSUM_Tx>
> >         enabled=0
> >         address: 00:16:3e:5d:6a:44
> > 
> > brconfig -a:
> > 
> > bridge0: flags=0<>
> 
> Ops, the bridge is not up.
> How did you configure it ? I guess you need something like
> create
> !brconfig $int add bce0 up
> 
> in /etc/ifconfig.bridge0
> 

I've configured it exactly this way.
And I've tried this too:
create
!brconfig $int add bce0 bce0 up
None of then had success. 
Maybe it is the permission of the file, I will change from 600 to 644.
How did you see that my bridge is disabled? 
enabled=0 in the xvif* interface?
-- 
att,
Adiel de Lima Ribeiro
facebook.com/sembr.dyndns.info