Re: Direction on debuggings

[Kimi <kimimeister%gmail.com@localhost>]

On 04/01/2008, Christos Zoulas <christos%astron.com@localhost> wrote:
> In article 
> <42b497160801032059o2b2b3616n4265e5045a41033%mail.gmail.com@localhost>,
> Kimi  <kimimeister%gmail.com@localhost> wrote:
> >Hi
> >
> >I would still like to get NetBSD up & running on a computer as to why
> >it hangs after pcppi1: attached to attimer1.
> >
> >can I have directions or a guide to help me understand why NetBSD
> >hangs at that point?
>
> mine says:
>
> pcppi1 at acpi0 (SPK, PNP0800)
> pcppi1: io 0x61
> midi0 at pcppi1: PC speaker (CPU-intensive output)
> spkr0 at pcppi1
> sysbeep0 at pcppi1
> RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
> attimer1 at acpi0 (TMR, PNP0100): AT Timer
> attimer1: io 0x40-0x5f irq 0
>

I have something strange, I booted it from the loader with boot -v &
it allowed me to install fine, it has even rebooted in to a GENERIC
kernel, all fine. it is baffling.

here is my dmesg:
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.45 (GENERIC) #0: Wed Dec 26 02:52:44 PST 2007
        
builds@wb28:/home/builds/ab/HEAD/amd64/200712260002Z-obj/home/builds/ab/HEAD/src/sys/arch/amd64/compile/GENERIC
total memory = 1022 MB
avail memory = 974 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
SMBIOS rev. 2.2 @ 0xf0800 (33 entries)
    ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Sempron(tm) Processor 3000+, 1799.57 MHz
cpu0: features: e7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: e7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: e7dbfbff<FXSR,SSE,SSE2,LONG,3DNOW2,3DNOW>
cpu0: features2: 1<SSE3>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 128 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: 3f<STC,TM,TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 1800 MHz
cpu0: available frequencies (Mhz): 1000 1800
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: WARNING: AMD errata present, BIOS upgrade may be
cpu0: WARNING: necessary to ensure reliable operation
cpu0: 8 page colors
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 14, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
acpi0: X/RSDT: OemId <AWARD ,AWRDACPI,42302e31>, AslId <AWRD,00000000>
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM (PNP0C01) [System Board] at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKE (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKF (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKG (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKH (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0
not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
COPR (PNP0C04) [Math Coprocessor] at acpi0 not configured
FAN (PNP0C0B) [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 118.0C critical
120.0C passive 41.0C
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Silicon Integrated System 760 Host Bridge (rev. 0x03)
agp0 at pchb0: 1 Miscellaneous Control unit(s) found.
agp0: aperture at 0xd8000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Silicon Integrated System 86C202 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: NVIDIA GeForce4 Ti 4200 (AGP8X) (rev. 0xa1)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
pcib0 at pci0 dev 2 function 0
pcib0: Silicon Integrated System 964 Host Bridge (rev. 0x36)
siside0 at pci0 dev 2 function 5
siside0: Silicon Integrated Systems 760 IDE controller (rev. 0x01)
siside0: bus-master DMA support present
siside0: primary channel wired to compatibility mode
siside0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at siside0 channel 0
siside0: secondary channel wired to compatibility mode
siside0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at siside0 channel 1
auich0 at pci0 dev 2 function 7: SiS 7012 AC-97 Audio
auich0: interrupting at ioapic0 pin 18 (irq 10)
auich0: ac97: Analog Devices AD1888 codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 3c7<AMAP,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
ohci0 at pci0 dev 3 function 0: Silicon Integrated System 5597/5598
USB host controller (rev. 0x0f)
ohci0: interrupting at ioapic0 pin 20 (irq 6)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 3 function 1: Silicon Integrated System 5597/5598
USB host controller (rev. 0x0f)
ohci1: interrupting at ioapic0 pin 21 (irq 9)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 3 function 2: Silicon Integrated System 5597/5598
USB host controller (rev. 0x0f)
ohci2: interrupting at ioapic0 pin 22 (irq 4)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Silicon Integra OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 3: Silicon Integrated System 7002 USB 2.0
host controller (rev. 0x00)
ehci0: interrupting at ioapic0 pin 23 (irq 3)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Silicon Integrated System EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
sip0 at pci0 dev 4 function 0: SiS 900 10/100 Ethernet, rev 0x91
sip0: interrupting at ioapic0 pin 19 (irq 5)
sip0: Ethernet address 00:15:58:5a:11:56
rlphy0 at sip0 phy 1: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
siside1 at pci0 dev 5 function 0
siside1: Silicon Integrated Systems 180/96X SATA controller (rev. 0x01)
siside1: bus-master DMA support present
siside1: primary channel wired to native-PCI mode
siside1: using ioapic0 pin 17 (irq 11) for native-PCI interrupt
atabus2 at siside1 channel 0
siside1: secondary channel wired to native-PCI mode
atabus3 at siside1 channel 1
cmdide0 at pci0 dev 8 function 0
cmdide0: Silicon Image 0680 (rev. 0x02)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to native-PCI mode
cmdide0: using ioapic0 pin 18 (irq 10) for native-PCI interrupt
atabus4 at cmdide0 channel 0
cmdide0: secondary channel configured to native-PCI mode
atabus5 at cmdide0 channel 1
fxp0 at pci0 dev 9 function 0: i82550 Ethernet, rev 13
fxp0: interrupting at ioapic0 pin 19 (irq 5)
fxp0: Ethernet address 00:02:b3:b4:e1:9d
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pchb1 at pci0 dev 24 function 0
pchb1: Advanced Micro Devices K8 AMD64 HyperTransport configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 1
pchb2: Advanced Micro Devices K8 AMD64 Address Map configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 2
pchb3: Advanced Micro Devices K8 AMD64 DRAM configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 3
pchb4: Advanced Micro Devices K8 AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 2, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
ums0 at uhidev1 reportid 3: 0 buttons and Z dir.
wsmouse0 at ums0 mux 0
wd0 at atabus0 drive 0: <WDC WD400EB-11CPF0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(siside0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <SAMSUNG DVD-ROM SD-616Q, , F401> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(siside0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1 at atabus4 drive 0: <WDC WD800EB-11DJF0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(cmdide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd2 at atabus5 drive 0: <WDC WD800BB-55JKA0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(cmdide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

I have the most latest bios even with warning

thank you for your help Christos

>
> try disabling drivers in order to find which one hangs.
>
> christos
>
>


-- 
Kimi