Re: ral driver is not working

[HugLeo <hugocanalli%gmail.com@localhost>]

Yes.

I think there are a bug.

I did a problem report here
http://www.netbsd.org/cgi-bin/query-pr-single.pl?number=41388

On Tue, May 12, 2009 at 3:13 AM, Piotr Adamus 
<panpiotradamus%gmail.com@localhost> wrote:
> I may report the same for Linksys PCI wifi (aslo ralink). I can set all
> parameters, sometimes scan the network but I cannot connect to the AP. On
> NetBSD 4 everything was just fine. I don't know what is going on.
>
> Rgrds,
>
> Piotr
>
> On Mon, May 11, 2009 at 11:31 PM, HugLeo <hugocanalli%gmail.com@localhost> 
> wrote:
>>
>> Hi.
>>
>> I don't need use wpa or wep. My ISP filter by MAC Addresses.
>>
>> On Mon, May 11, 2009 at 3:04 PM, Francisco Valladolid 
>> <ficovh%gmail.com@localhost>
>> wrote:
>> > Hi,
>> >
>> > Are you using wpa or wep authentication ?
>> >
>> > for WEP :
>> >
>> > # ifconfig ral0 nwid <my_ap> nwkey 0x1234567890
>> > # dhcpcd ral0
>> >
>> > for WPA, WPA2 it can do via wpa_supplicant
>> >
>> > Create or edit /etc/wpa_supplicant.conf
>> >
>> > ctrl_interface=/var/run/wpa_supplicant
>> > ctrl_interface_group=wheel
>> >
>> > network {
>> > ÂÂÂÂÂ ssid=myhomewlan
>> > ÂÂÂÂÂ scan_ssid=1
>> > ÂÂÂÂÂ key_mgmt=WPA-PSK
>> > ÂÂÂÂÂ psk="some_wpa_key"
>> > }
>> >
>> > then initi wpa_suppplicant
>> >
>> > # wpa_supplicant -iral0 -B -c/etc/wpa_supplicant.conf
>> >
>> > for wpa key, you can use
>> > wpa_passphrase(8)
>> >
>> > Best Regards.
>> >
>> >
>> >
>> >
>> >
>> > On Tue, May 5, 2009 at 9:34 PM, HugLeo <hugocanalli%gmail.com@localhost> 
>> > wrote:
>> >>
>> >> Hi
>> >>
>> >> I'm using a PCI D-Link DWL G510 (Ralink Chipset). NetBSD detect like
>> >> ral0
>> >> and I can set options, by instance:
>> >>
>> >> ifconfig ral0 192.168.1.2 nwid MyNetwork
>> >>
>> >> But I get no network.
>> >>
>> >> I also use:
>> >> wiconfig ral0 -D
>> >> But detect no access point.
>> >>
>> >> I've tried use wpa_supplicant with ap in monitor mode but I also don't
>> >> get
>> >> success.
>> >>
>> >> dmesg detect: ral0 at pci 1 dev 9 function 0: vendor 0x1814 product
>> >> 0x0302
>> >> ral0 interrupting at ioapic 0 pin 17
>> >> ral0 MACIBBP RT2561C, RF RT2527
>> >>
>> >> Any ideas?
>> >> --
>> >> -hUgLeO-â
>> >
>> >
>> >
>> > --
>> > Francisco Valladolid H.
>> > -- http://bsdguy.net - Jesus Christ follower.
>> >
>>
>>
>>
>> --
>> -hUgLeO-â
>>
>
>



-- 
-hUgLeO-â