port-i386/38734: fxp0, re0, ath0 at pci... unable to map device registers

[fr33mind%gmail.com@localhost]

>Number:         38734
>Category:       port-i386
>Synopsis:       fxp0, re0, ath0 at pci... unable to map device registers
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat May 24 10:55:00 +0000 2008
>Originator:     Eric
>Release:        4
>Organization:
>Environment:
NetBSD  4.99.62 NetBSD 4.99.62 (GENERIC) #0: Thu May 15 20:59:51 CEST 2008  
joerg%britannica.bec.de@localhost:/data/obj/i386/sys/arch/i386/compile/GENERIC 
i386

>Description:

In the system, I have RTK8169SC 1Gigabit Intellinet NIC (re0), WiFi Intellinet 
nic Atheros AR5002 (ath0), onboard Intel Nic 82801DB Pro /100 VE (fxp0) on ASUS 
P4B533 Motherboard.

This system will be a gateway/router with PF dedicated box.

I install a temp nic, 3Com standard, working at the first try without any 
change to be able to download things.

All cards are PCI.

I try:

-Generic Kernel at install iso CD.
-Generic Kernel from may 15 (head) someone on irc send me. (this one)
-Custom Kernel with adjust_kernel script and modify to enable thos nics.

Same problem.

Also, If I disable ACPI in userspace, after "login:" at boot, keyboard is 
frozen, sshd crash too with a message.




$ dmesg
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.62 (GENERIC) #0: Thu May 15 20:59:51 CEST 2008
        
joerg%britannica.bec.de@localhost:/data/obj/i386/sys/arch/i386/compile/GENERIC
total memory = 247 MB
avail memory = 231 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
System Manufacturer System Name (System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel 686-class, 1816MHz, id 0xf24
cpu0: 16 page colors
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20080321
acpi0: X/RSDT: OemId <ASUS  ,P4B533VM,42302e31>, AslId <MSFT,31313031>
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM1 (PNP0C01) at acpi0 not configured
LNKA (PNP0C0F) at acpi0 not configured
LNKC (PNP0C0F) at acpi0 not configured
LNKD (PNP0C0F) at acpi0 not configured
LNKH (PNP0C0F) at acpi0 not configured
PCI0 (PNP0A03) at acpi0 not configured
SBIO (PNP0C02) at acpi0 not configured
SYS1 (PNP0C02) at acpi0 not configured
PIC (PNP0000) at acpi0 not configured
DMA1 (PNP0200) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) at acpi0 not configured
ECP (PNP0401) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
SYS2 (PNP0C02) at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: unable to establish interrupt for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x2560 (rev. 0x01)
agp0 at pchb0: detected 8060k stolen memory
agp0: aperture at 0xe8000000, size 0x8000000
vga1 at pci0 dev 2 function 0: vendor 0x8086 product 0x2562 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x24c2 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x24c4 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x24c7 (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x24cd (rev. 0x01)
ehci0: can't map memory space
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x81)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
========================
fxp0 at pci1 dev 8 function 0: unable to map device registers
re0 at pci1 dev 9 function 0: can't map registers
ath0 at pci1 dev 10 function 0cannot map register space
========================
ex0 at pci1 dev 11 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 
0x78)
ex0: interrupting at ioapic0 pin 23
ex0: MAC address 00:01:03:34:be:37
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x24c0 (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DB IDE Controller (ICH4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: can't map codec i/o space
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Cypress Sem PS2/USB Browser Combo Mouse, rev 1.00/0.00, addr 2, iclass 
3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <WDC WD200EB-00CSF0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


# lspci
00:00.0 Host bridge: Intel Corp. 82845G/GL [Brookdale-G] Chipset Host Bridge 
(rev 01)
00:02.0 VGA compatible controller: Intel Corp. 82845G/GL [Brookdale-G] Chipset 
Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 01)
01:08.0 Ethernet controller: Intel Corp. 82801BD PRO/100 VE (CNR) Ethernet 
Controller (rev 81)
01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 (rev 10)
01:0a.0 Ethernet controller: Unknown device 168c:0013 (rev 01)
01:0b.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)


>How-To-Repeat:

>Fix:
Not know at this time but maybe an hint?

If I use floppies set bootlap.fs to boot/install, all nic are detected and I 
can use re0 for exemple to download all sets... but after rebooting, same 
problem I report here.