NetBSD-Bugs archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: xsrc/40953: Cannot switch VTs back to X.org on 5.0_RC2/i386
The following reply was made to PR xsrc/40953; it has been noted by GNATS.
From: "David H. Gutteridge" <dhgutteridge%sympatico.ca@localhost>
To: gnats-bugs%NetBSD.org@localhost
Cc:
Subject: Re: xsrc/40953: Cannot switch VTs back to X.org on 5.0_RC2/i386
Date: Fri, 6 Nov 2009 22:06:54 -0500
On 5.0_STABLE after the recent X.org upgrade, the "ForceEnablePipeA" =3D
"true" configuration setting no longer has the same effect, I cannot
switch back to the X session after switching VTs. The most recent log
is attached below.
I found a bug report that seemed vaguely related, but I have no idea if
it's really relevant:
https://bugs.freedesktop.org/show_bug.cgi?id=3D24383
Dave
X.Org X Server 1.6.3
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: NetBSD/i386 -
Current Operating System: NetBSD arcusvii.nonus-porta.net 5.0_STABLE =20
NetBSD 5.0_STABLE (ARCUSVII) #2: Thu Oct 29 23:35:21 EDT 2009 =20
disciple%arcusvii.nonus-porta.net@localhost:/home/disciple/netbsd-5/usr/src/sys/=20=
arch/i386/compile/obj/ARCUSVII i386
Build Date: 09 July 2009 12:14:03AM
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (=3D=3D) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(=3D=3D) Log file: "/var/log/Xorg.0.log", Time: Fri Nov 6 16:48:00 2009
(=3D=3D) Using config file: "/etc/X11/xorg.conf"
Parse error on line 9 of section Files in file /etc/X11/xorg.conf
Ignoring obsolete keyword "RgbPath".
(=3D=3D) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontVTSwitch" "false"
(**) Option "DontZap" "false"
(=3D=3D) Not automatically adding devices
(=3D=3D) Not automatically enabling devices
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/=20=
Speedo/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/Speedo/").
(WW) `fonts.dir' not found (or not valid) in "/usr/X11R7/lib/X11/fonts/=20=
CID/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/X11R7/lib/X11/fonts/CID/").
(**) FontPath set to:
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
/usr/X11R7/lib/X11/fonts/misc/,
/usr/X11R7/lib/X11/fonts/TTF/,
/usr/X11R7/lib/X11/fonts/Type1/,
/usr/X11R7/lib/X11/fonts/75dpi/,
/usr/X11R7/lib/X11/fonts/100dpi/,
built-ins
(**) ModulePath set to "/usr/X11R7/lib/modules"
(II) Loader magic: 0x3700
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on netbsd
(--) Using wscons driver on /dev/ttyE4 in pcvt compatibility mode =20
(version 3.32)
(--) using VT number 5
(--) PCI:*(0:0:2:0) 8086:27ae:1462:0110 rev 3, Mem @ =20
0xdfe80000/524288, 0xc0000000/268435456, 0xdff00000/262144, I/O @ =20
0x0000d0f0/8
(--) PCI: (0:0:2:1) 8086:27a6:1462:0110 rev 3, Mem @ 0xdfe00000/524288
(II) System resource ranges:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also =20
specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also =20
specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also =20
specified in the config file.
(II) "record" will be loaded. This was enabled by default and also =20
specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also =20
specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "cfb"
(WW) Warning, couldn't open module cfb
(II) UnloadModule: "cfb"
(EE) Failed to load module "cfb" (module does not exist, 0)
(II) LoadModule: "cfb32"
(WW) Warning, couldn't open module cfb32
(II) UnloadModule: "cfb32"
(EE) Failed to load module "cfb32" (module does not exist, 0)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R7/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R7/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R7/lib/modules/extensions//libglx.so
(II) Module glx: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.0.0
ABI class: X.Org Server Extension, version 2.0
(=3D=3D) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "mfb"
(WW) Warning, couldn't open module mfb
(II) UnloadModule: "mfb"
(EE) Failed to load module "mfb" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/X11R7/lib/modules/extensions//librecord.so
(II) Module record: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "shadow"
(II) Loading /usr/X11R7/lib/modules/extensions//libshadow.so
(II) Module shadow: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) LoadModule: "dri"
(II) Loading /usr/X11R7/lib/modules/extensions//libdri.so
(II) Module dri: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "dri2"
(II) Loading /usr/X11R7/lib/modules/extensions//libdri2.so
(II) Module dri2: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/X11R7/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 2.7.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/X11R7/lib/modules/drivers//mouse_drv.so
(II) Module mouse: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/X11R7/lib/modules/drivers//kbd_drv.so
(II) Module kbd: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, =20
965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel=AE GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R7/lib/modules//libvgahw.so
(II) Module vgahw: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(=3D=3D) intel(0): Depth 24, (--) framebuffer bpp 32
(=3D=3D) intel(0): RGB weight 888
(=3D=3D) intel(0): Default visual is TrueColor
(**) intel(0): Option "ForceEnablePipeA" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(--) intel(0): Linear framebuffer at 0xC0000000
(--) intel(0): IO registers at addr 0xDFE80000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(=3D=3D) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" =20
registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(WW) intel(0): remove MTRR a0000 - b0000
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(WW) intel(0): remove MTRR a0000 - b0000
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(=3D=3D) intel(0): video overlay key set to 0x101fe
(=3D=3D) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(=3D=3D) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R7/lib/modules//libfb.so
(II) Module fb: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/X11R7/lib/modules//libexa.so
(II) Module exa: vendor=3D"X.Org Foundation"
compiled for 1.6.3, module version =3D 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to =20=
0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(=3D=3D) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 241152 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 964608 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Device not configured)
drmOpenDevice: open result is -1, (Device not configured)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (Device not configured)
drmOpenDevice: open result is -1, (Device not configured)
drmOpenDevice: Open failed
[drm] failed to load kernel module "i915"
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(=3D=3D) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer =20=
compression
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset =20
is 0x0000
(WW) intel(0): remove MTRR a0000 - b0000
(II) EXA(0): Offscreen pixmap area of 12582912 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(=3D=3D) intel(0): Backing store disabled
(=3D=3D) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset =20=
1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00e2b000 (pgoffset =20=
3627)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset =20=
4096)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01400000 (pgoffset =20=
5120)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 =20
kB, 0x000000003f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, =20
0x000000003fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, =20
0x000000003fe21000 physical
)
(II) intel(0): 0x0062b000-0x00e2afff: fake bufmgr (8192 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00e2b000-0x00e2bfff: overlay registers (4 kB, =20
0x000000000504c000 physical
)
(II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x01400000-0x01ffffff: exa offscreen (12288 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe =20=
A.
(WW) intel(0): Hardware claims pipe A is on while software believes =20=
it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled =20=
message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Failed
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/X11R7/lib/modules/dri/=20
swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) intel(0): Setting screen physical size to 220 x 129
(**) Option "Protocol" "wsmouse"
(**) Mouse0: Protocol: wsmouse
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/wsmouse"
(=3D=3D) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 =20
600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 =20
600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 =20
600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 =20
600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 =20
600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 =20
600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 =20
600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 =20
600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 =20
600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 =20
600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 =20
600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 =20
600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x600"x0.0 45.00 1024 1077 1112 1200 =20
600 604 609 625 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "1024x600"x0.0 51.42 1024 1117 1152 1240 =20
600 617 622 638 -hsync -vsync (41.5 kHz)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): DDCModeFromDetailedTiming: 1024x600 Warning: We only =20
handle separate sync.
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
(WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset =20=
1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00e2b000 (pgoffset =20=
3627)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset =20=
4096)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01400000 (pgoffset =20=
5120)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 =20
kB, 0x000000003f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, =20
0x000000003fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, =20
0x000000003fe21000 physical
)
(II) intel(0): 0x0062b000-0x00e2afff: fake bufmgr (8192 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00e2b000-0x00e2bfff: overlay registers (4 kB, =20
0x000000000504c000 physical
)
(II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x01400000-0x01ffffff: exa offscreen (12288 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000011, page table error, instruction error
(WW) intel(0): PGTBL_ER is 0x00000010, display A pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe =20=
B.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
Failed to switch consoles (Device not configured)
Failed to switch consoles (Device not configured)
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
(WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007bf000 (pgoffset =20=
1983)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00e2b000 (pgoffset =20=
3627)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset =20=
4096)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01400000 (pgoffset =20=
5120)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 =20
kB, 0x000000003f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, =20
0x000000003fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, =20
0x000000003fe21000 physical
)
(II) intel(0): 0x0062b000-0x00e2afff: fake bufmgr (8192 kB)
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x00e2b000-0x00e2bfff: overlay registers (4 kB, =20
0x000000000504c000 physical
)
(II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) X tiled
(II) intel(0): 0x01400000-0x01ffffff: exa offscreen (12288 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000011, page table error, instruction error
(WW) intel(0): PGTBL_ER is 0x00000010, display A pte
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe =20=
B.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(WW) intel(0): drmDropMaster failed: Unknown error: 4294967295
(II) UnloadModule: "kbd"
(II) UnloadModule: "mouse"
Home |
Main Index |
Thread Index |
Old Index