kern/42956: ACPI interrupt regression between netbsd-4 and netbsd-5/-current

To: kern-bug-people%netbsd.org@localhost,gnats-admin%netbsd.org@localhost,netbsd-bugs%netbsd.org@localhost
Subject: kern/42956: ACPI interrupt regression between netbsd-4 and netbsd-5/-current
From: netbsd%precedence.co.uk@localhost
Date: Thu, 11 Mar 2010 11:00:01 +0000 (UTC)
>Number:         42956
>Category:       kern
>Synopsis:       netbsd-5 with acpi gives stuttering audio and uhub: device 
>problem, disabling port
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Mar 11 11:00:01 +0000 2010
>Originator:     Stephen Borrill
>Release:        NetBSD 5.0_STABLE
>Organization:
>Environment:
        
        
System: NetBSD 5.0_STABLE (GENERIC) #0: Mon Mar  8 13:43:58 GMT 2010       
root%builder.internal.precedence.co.uk@localhost:/usr/obj/5.0/i386/sys/arch/i386/compile/GENERIC
Architecture: i386
Machine: i386
>Description:
I've a small number of generations of VIA C7 devices used in an embedded
project (the revisions tested so far I'll refer to as gen3 and gen4).
netbsd-4 works fine on them. With netbsd-5 (and -current) USB does not work.
Either nothing happens when devices are inserted or "uhub2: device problem,
disabling port 2" is seen. I've also had reports of stuttering audio.

My initial workaround was to disable acpi and enable apm. This fixed the USB
and audio problems, but the device would not power down cleanly with halt -p 
(as an
aside this is another regression. The same boards powered down with netbsd-3
which doesn't have ACPI). I patched apm to force a powerdown which worked
generally, but on gen3 machines the power light stayed on even though
other internal circuitry had powered down).

I tested joerg's patch at:
http://mail-index.netbsd.org/current-users/2009/11/09/msg011119.html

This completely fixed the problems on gen3 machines (powerdown, usb, audio),
but gave rise to massive interrupt storms on gen4 machines (usb still
worked, but power button did nothing).

Here are 6 dmesgs:

1) Gen3, NetBSD 5
2) Gen3, NetBSD 5 with boot -2
3) Gen4, NetBSD 5
4) Gen4, NetBSD 5 with boot -2
5) Gen3, NetBSD 4
6) Gen4, NetBSD 4

1) Gen3, NetBSD 5
-----------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #0: Mon Mar  8 13:43:58 GMT 2010
        
root%builder.internal.precedence.co.uk@localhost:/usr/obj/5.0/i386/sys/arch/i386/compile/GENERIC
total memory = 238 MB
avail memory = 222 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
    ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 997MHz, id 0x6a9
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 900 800
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <P4M80P,AWRDACPI,42302e31>, AslId <AWRD,00000000>
ALKB: ACPI: Found matching pin for 0.16.INTA at func 0: 11
ALKB: BIOS IRQ 11 does not match initial IRQ 5
ALKB: ACPI: Found matching pin for 0.16.INTB at func 2: 5
ALKB: BIOS IRQ 5 for 0.16.INTB does not match previous BIOS IRQ 11
ALKB: ACPI: Found matching pin for 0.16.INTC at func 4: 10
ALKB: BIOS IRQ 10 for 0.16.INTC does not match previous BIOS IRQ 11
ALKC: ACPI: Found matching pin for 0.17.INTC at func 5: 10
ALKD: ACPI: Found matching pin for 0.18.INTA at func 0: 11
ALKA: ACPI: Found matching pin for 0.15.INTA at func 0: 255
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 122.0C critical 124.0C passive 
33.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0314 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3344 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
rtk0 at pci0 dev 13 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 18
rtk0: Ethernet address 00:16:ec:e2:50:46
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 5
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 5
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 5
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 5
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 5
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 10
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, playback, capture, independent
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
ALKD: mpacpi_findintr_linkdev: irq mismatch (11 vs 1)
vr0: interrupting at ioapic0 pin 11
vr0: Ethernet address: 00:00:00:00:00:00
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: rtk0
root on rtk0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_name=xnc105.internal.precedence.co.uk
nfs_boot: my_domain=internal.precedence.co.uk
nfs_boot: my_addr=192.168.1.105
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.254
root on 192.168.1.1:/usr/nfsroot/netbsd-5/i386
root file system type: nfs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
uhub2: device problem, disabling port 2

2) Gen3, NetBSD 5 with boot -2
------------------------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #0: Mon Mar  8 13:43:58 GMT 2010
        
root%builder.internal.precedence.co.uk@localhost:/usr/obj/5.0/i386/sys/arch/i386/compile/GENERIC
total memory = 238 MB
avail memory = 222 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
    ( )
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 997MHz, id 0x6a9
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 900 800
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type ISA   
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0314 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3344 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
rtk0 at pci0 dev 13 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 18
rtk0: Ethernet address 00:16:ec:e2:50:46
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, playback, capture, independent
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at ioapic0 pin 23
vr0: Ethernet address: 00:00:00:00:00:00
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: rtk0
root on rtk0
nfs_boot: trying DHCP/BOOTP
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Sweex keyboard Sweex USB keyboard, rev 1.10/3.50, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1
uhidev1: Sweex keyboard Sweex USB keyboard, rev 1.10/3.50, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_name=xnc105.internal.precedence.co.uk
nfs_boot: my_domain=internal.precedence.co.uk
nfs_boot: my_addr=192.168.1.105
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.254
root on 192.168.1.1:/usr/nfsroot/netbsd-5/i386
root file system type: nfs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

3) Gen4, NetBSD 5
-----------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #0: Mon Mar  8 13:43:58 GMT 2010
        
root%builder.internal.precedence.co.uk@localhost:/usr/obj/5.0/i386/sys/arch/i386/compile/GENERIC
total memory = 494 MB
avail memory = 474 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
    ( )
mainbus0 (root)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 997MHz, id 0x6a9
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 900 800
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <P4M80P,AWRDACPI,42302e31>, AslId <AWRD,00000000>
ALKB: ACPI: Found matching pin for 0.16.INTA at func 0: 10
ALKB: BIOS IRQ 10 does not match initial IRQ 11
ALKB: ACPI: Found matching pin for 0.16.INTB at func 2: 11
ALKB: BIOS IRQ 11 for 0.16.INTB does not match previous BIOS IRQ 10
ALKB: ACPI: Found matching pin for 0.16.INTC at func 4: 5
ALKB: BIOS IRQ 5 for 0.16.INTC does not match previous BIOS IRQ 10
ALKC: ACPI: Found matching pin for 0.17.INTC at func 5: 5
ALKA: ACPI: Found matching pin for 0.15.INTA at func 1: 255
ALKA: ACPI: Found matching pin for 0.15.INTB at func 0: 11
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04): io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
FDC0 (PNP0700) at acpi0 not configured
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
LPT1 (PNP0400) at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
pckbc2 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
FAN (PNP0C0B) at acpi0 not configured
acpitz0 at acpi0 (THRM): active cooling level 0: 50.0C critical 60.0C passive 
27.0C
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0314 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3344 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 17
rtk0: Ethernet address 00:1b:b9:cb:d9:14
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
ALKA: mpacpi_findintr_linkdev: irq mismatch (11 vs 1)
viaide0: using ioapic0 pin 11 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 11
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 11
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 11
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 11
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 11
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 5
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, playback, capture, independent
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus2 drive 0: <JMAU FDM 128MB>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: rtk0
root on rtk0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_name=xnc111.internal.precedence.co.uk
nfs_boot: my_domain=internal.precedence.co.uk
nfs_boot: my_addr=192.168.1.111
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.254
root on 192.168.1.1:/usr/nfsroot/netbsd-5/i386
root file system type: nfs
WARNING: clock lost 2352 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

4) Gen4, NetBSD 5 with boot -2
------------------------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.0_STABLE (GENERIC) #0: Mon Mar  8 13:43:58 GMT 2010
        
root%builder.internal.precedence.co.uk@localhost:/usr/obj/5.0/i386/sys/arch/i386/compile/GENERIC
total memory = 494 MB
avail memory = 474 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
    ( )
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 997MHz, id 0x6a9
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 900 800
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type ISA   
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 3, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0314 (rev. 0x00)
agp0 at pchb0 (v3): aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3344 (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 17
rtk0: Ethernet address 00:1b:b9:cb:d9:14
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: using ioapic0 pin 20 for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci0: interrupting at ioapic0 pin 21
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
uhci3 at pci0 dev 16 function 3: vendor 0x1106 product 0x3038 (rev. 0x81)
uhci3: interrupting at ioapic0 pin 21
usb3 at uhci3: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x86)
ehci0: interrupting at ioapic0 pin 21
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x3227 (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, playback, capture, independent
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
attimer0: attached to pcppi0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb3: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: vendor 0x1106 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
wd0 at atabus2 drive 0: <JMAU FDM 128MB>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: rtk0
root on rtk0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_name=xnc111.internal.precedence.co.uk
nfs_boot: my_domain=internal.precedence.co.uk
nfs_boot: my_addr=192.168.1.111
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.254
root on 192.168.1.1:/usr/nfsroot/netbsd-5/i386
root file system type: nfs
WARNING: clock lost 2352 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

5) Gen3, NetBSD 4
-----------------
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_STABLE (GENERIC) #3: Thu Mar 11 09:54:42 GMT 2010
        
root%builder.internal.precedence.co.uk@localhost:/usr/obj/netbsd-4/i386/sys/arch/i386/compile/GENERIC
total memory = 238 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 224 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf9ed0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: VIA C3 (686-class), 997.57 MHz, id 0x6a9
cpu0: features a7d9bbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features a7d9bbff<PGE,CMOV,PAT,MPC,NOX,MMXX,MMX>
cpu0: features a7d9bbff<FXSR,SSE,SSE2,LONG,3DNOW>
cpu0: features2 181<SSE3,EST,TM2>
cpu0: "VIA Esther processor 1000MHz"
cpu0: I-cache 64 KB 64B/line 4-way, D-cache 64 KB 64B/line 4-way
cpu0: L2 cache 128 KB 64B/line 10-way
cpu0: ITLB 128 4 KB entries 8-way
cpu0: DTLB 128 4 KB entries 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 800
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 4 page colors
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <P4M80P,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0400 [Standard LPT printer port] at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 122.0C
acpitz0: critical 124.0C passive 29.0C
pcppi1: attached to attimer1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0314 (rev. 0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0xf500000
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8377CE CPU-AGP Bridge (rev. 
0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: VIA Technologies VT3314 CN900 UniChrome 
Integrated Graphics (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
rtk0 at pci0 dev 13 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 18 (irq 10)
rtk0: Ethernet address 00:16:ec:e2:50:46
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel ignored (disabled)
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 5)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 5)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller 
(rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 10)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 10)
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, independent
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at ioapic0 pin 23 (irq 11)
vr0: Ethernet address: 00:00:00:00:00:00
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
boot device: rtk0
root on rtk0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_name=xnc105.internal.precedence.co.uk
nfs_boot: my_domain=internal.precedence.co.uk
nfs_boot: my_addr=192.168.1.105
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.254
root on 192.168.1.1:/usr/nfsroot/netbsd-4/i386
root file system type: nfs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
uhidev0 at uhub2 port 2 configuration 1 interface 0
uhidev0: Sweex keyboard Sweex USB keyboard, rev 1.10/3.50, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1
uhidev1: Sweex keyboard Sweex USB keyboard, rev 1.10/3.50, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0

6) Gen4, NetBSD 4
-----------------

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_STABLE (GENERIC) #3: Thu Mar 11 09:54:42 GMT 2010
        
root%builder.internal.precedence.co.uk@localhost:/usr/obj/netbsd-4/i386/sys/arch/i386/compile/GENERIC
total memory = 494 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 475 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xf9ed0
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: VIA C3 (686-class), 997.58 MHz, id 0x6a9
cpu0: features a7d9bbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features a7d9bbff<PGE,CMOV,PAT,MPC,NOX,MMXX,MMX>
cpu0: features a7d9bbff<FXSR,SSE,SSE2,LONG,3DNOW>
cpu0: features2 181<SSE3,EST,TM2>
cpu0: "VIA Esther processor 1000MHz"
cpu0: I-cache 64 KB 64B/line 4-way, D-cache 64 KB 64B/line 4-way
cpu0: L2 cache 128 KB 64B/line 10-way
cpu0: ITLB 128 4 KB entries 8-way
cpu0: DTLB 128 4 KB entries 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (1004 mV) 1000 MHz
cpu0: unknown Enhanced SpeedStep CPU.
cpu0: using only highest and lowest power states.
cpu0: Enhanced SpeedStep frequencies available (MHz): 1000 800
cpu0: calibrating local timer
cpu0: apic clock running at 99 MHz
cpu0: 4 page colors
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <P4M80P,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0400 [Standard LPT printer port] at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
PNP0C0B [ACPI Fan] at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: active cooling level 0: 50.0C
acpitz0: critical 60.0C passive 26.0C
pcppi1: attached to attimer1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0314 (rev. 0x00)
agp0 at pchb0: aperture at 0xe8000000, size 0xf500000
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1314 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2314 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3208 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4314 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7314 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8377CE CPU-AGP Bridge (rev. 
0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: VIA Technologies VT3314 CN900 UniChrome 
Integrated Graphics (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
rtk0 at pci0 dev 10 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 17 (irq 11)
rtk0: Ethernet address 00:1b:b9:cb:d9:14
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies VT8237 SATA Controller (rev. 0x80)
viaide0: bus-master DMA support present
viaide0: primary channel configured to native-PCI mode
viaide0: using ioapic0 pin 20 (irq 11) for native-PCI interrupt
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to native-PCI mode
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 15 function 1
viaide1: VIA Technologies VT8237 ATA133 controller
viaide1: bus-master DMA support present
viaide1: primary channel configured to compatibility mode
viaide1: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus2 at viaide1 channel 0
viaide1: secondary channel configured to compatibility mode
viaide1: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus3 at viaide1 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci0: interrupting at ioapic0 pin 21 (irq 10)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci1: interrupting at ioapic0 pin 21 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci2: interrupting at ioapic0 pin 21 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3: VIA Technologies VT83C572 USB Controller (rev. 
0x81)
uhci3: interrupting at ioapic0 pin 21 (irq 11)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller 
(rev. 0x86)
ehci0: interrupting at ioapic0 pin 21 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8237 (Apollo KT600) PCI-ISA Bridge (rev. 0x00)
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8237 AC'97 Audio (rev 0x60)
auvia0: interrupting at ioapic0 pin 22 (irq 5)
auvia0: ac97: Avance Logic ALC655 codec; no 3D stereo
auvia0: ac97: ext id 9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at auvia0: full duplex, independent
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus2 drive 0: <JMAU FDM 128MB>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 122 MB, 978 cyl, 8 head, 32 sec, 512 bytes/sect x 250368 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(viaide1:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
boot device: rtk0
root on rtk0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 192.168.1.1
nfs_boot: my_name=xnc111.internal.precedence.co.uk
nfs_boot: my_domain=internal.precedence.co.uk
nfs_boot: my_addr=192.168.1.111
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=192.168.1.254
root on 192.168.1.1:/usr/nfsroot/netbsd-4/i386
root file system type: nfs
WARNING: clock lost 2352 days
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
uhidev0 at uhub3 port 2 configuration 1 interface 0
uhidev0: Sweex keyboard Sweex USB keyboard, rev 1.10/3.50, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 1
uhidev1: Sweex keyboard Sweex USB keyboard, rev 1.10/3.50, addr 2, iclass 3/0
uhidev1: 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0

>How-To-Repeat:
Boot netbsd-5 on VIA C7 board.
Insert USB keyboard
See either nothing or "uhub2: device problem, disabling port 2"
>Fix:
Disabling acpi is a workaround, but for reasons stated above, plus many
others, it's not an acceptable fix.

>Unformatted:
Prev by Date: PR/42952 CVS commit: src/sbin/dump
Next by Date: Re: port-sparc64/38286 (NetBSD/sparc64 4.99.55 MP Panic)
Previous by Thread: PR/42952 CVS commit: src/sbin/dump
Next by Thread: Re: kern/42956: ACPI interrupt regression between netbsd-4 and netbsd-5/-current
Indexes:
Home | Main Index | Thread Index | Old Index