Re: kern/53047: run0 doesn't work with WPA base station

[Andrew Cagney <andrew.cagney%gmail.com@localhost>]

Yes, run0.

Here's abbreviated output (any missing value is 0) from the arm (amd
looks the same):

# ifconfig -v run0 | grep -v ': 0$'
run0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        ssid "" -rts -frag nwkey 65536:"","","",""
        powersave off
        address: e0:cb:e0:cb:b1:32
        media: IEEE802.11 autoselect (DS1)
        status: no network
        input: 0 packets, 0 bytes
        output: 5175 packets, 0 bytes
        rx from wrong bssid: 9
        rx discard mgt frames: 16
        active scans started: 347
        inet6 fe80::e2cb:e0ff:fecb:b132%run0/64 flags 0x0 scopeid 0x2