Re: kern/53047: run0 doesn't work with WPA base station

[Andrew Cagney <andrew.cagney%gmail.com@localhost>]

The following reply was made to PR kern/53047; it has been noted by GNATS.

From: Andrew Cagney <andrew.cagney%gmail.com@localhost>
To: gnats-bugs%netbsd.org@localhost
Cc: kern-bug-people%netbsd.org@localhost, gnats-admin%netbsd.org@localhost, netbsd-bugs%netbsd.org@localhost
Subject: Re: kern/53047: run0 doesn't work with WPA base station
Date: Fri, 23 Feb 2018 12:26:45 -0500

 Yes, run0.
 
 Here's abbreviated output (any missing value is 0) from the arm (amd
 looks the same):
 
 # ifconfig -v run0 | grep -v ': 0$'
 run0: flags=0x8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         ssid "" -rts -frag nwkey 65536:"","","",""
         powersave off
         address: e0:cb:e0:cb:b1:32
         media: IEEE802.11 autoselect (DS1)
         status: no network
         input: 0 packets, 0 bytes
         output: 5175 packets, 0 bytes
         rx from wrong bssid: 9
         rx discard mgt frames: 16
         active scans started: 347
         inet6 fe80::e2cb:e0ff:fecb:b132%run0/64 flags 0x0 scopeid 0x2