Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to boot on J3455-ITX board (ASRock)

[wgstuken%grimme-reitenspezial.de@localhost]

HI again,

with the patch to accept other steppings too, the system is coming up 
now.

There are still some error messages related to CPU initialization, but I 
was able to install from install-image and boot from hard-disk.

additional failures reported during boot: (all typed in - no copy paste 
from vga monitor ...)

for all four CPU there is this message:
acpicpu<n>: autoconfiguration error: failed to add C-state: AE_SUPPORT
this message comes twice for each CPU before the C1 setup is printed for 
CPU0 and before the termal-sensor information is printed for the others.


acpifan0: autoconfiguration error: failed to initialize
this is for CPU0 - and there is currently no fan connected ...

ichsmb0 at cpi0 dev 31 function 1: Intel Apollo Lake SMBus (rev. 0x0d)
pci_intr_map: no mapping for pin A (line=ff)
cannot set up cpi_intr_handle_t
ichsmb0: polling

i915drmkms0: notice: Failed to load DMC firmware 
i915/btx_dmx_ver1_07.bin .Disabling runtime power management.
i915drmkms0: notice: RC6 and powersaving disabled by BIOS
the order of these two lines differ between boot from usb-stick and 
sata-disk ...
BIOS setup for grafic is default - nothing changed there.


So the starting problem is solved now.
I think this can to into next release.

No idea if the C-state setup problem is serious or not and/or if ther 
should be new PR for this.


To the other thing reported in this one - the setup issues on i386:
The first one - failed to copy includes in tools compilation - cannot be 
reprocued anymore. (same system setup, same source tree - simply gone 
now)
The compilation of 'release' is still running. In case the 
sysinstmsgs.fr failure will come up, I will create new PR for that one.

Regards,

Wolfgang



Am 18.01.2025 18:15, schrieb wgstuken%grimme-reitenspezial.de@localhost via gnats:
> The following reply was made to PR port-amd64/58982; it has been noted 
> by GNATS.
>
> From: wgstuken%grimme-reitenspezial.de@localhost
> To: gnats-bugs%netbsd.org@localhost
> Cc: martin%duskware.de@localhost
> Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed 
> to
>  boot on J3455-ITX board (ASRock)
> Date: Sat, 18 Jan 2025 16:52:57 +0100
>
>  Yes - will do tomorrow or Monday.
>
>  btw - the build on i386 run again into the problem that sysinstmsgs.fr
>  was not found -> abort
>  will try to figure this out too.
>
>  On the amd64 9.3 system the build seems to work. I switched now to 
> this
>  (not in really good shape) system for build the patched kernel.
>
>  Regards,
>
>  Wolfgang
>
>  Am 17.01.2025 14:00, schrieb Martin Husemann via gnats:
>  > The following reply was made to PR port-amd64/58982; it has been 
> noted
>  > by GNATS.
>  >
>  > From: Martin Husemann <martin%duskware.de@localhost>
>  > To: gnats-bugs%netbsd.org@localhost
>  > Cc:
>  > Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) 
> failed
>  > to
>  >  boot on J3455-ITX board (ASRock)
>  > Date: Fri, 17 Jan 2025 13:59:03 +0100
>  >
>  >  Maybe move this to a different PR, as it is unrelated to the 
> original
>  > issue?
>  >
>  >  Martin