Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to boot on J3455-ITX board (ASRock)

["wgstuken%grimme-reitenspezial.de@localhost via gnats" <gnats-admin%NetBSD.org@localhost>]

The following reply was made to PR port-amd64/58982; it has been noted by GNATS.

From: wgstuken%grimme-reitenspezial.de@localhost
To: gnats-bugs%netbsd.org@localhost
Cc: port-amd64-maintainer%netbsd.org@localhost, gnats-admin%netbsd.org@localhost,
 netbsd-bugs%netbsd.org@localhost
Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed to
 boot on J3455-ITX board (ASRock)
Date: Tue, 21 Jan 2025 10:59:29 +0100

 HI again,
 
 with the patch to accept other steppings too, the system is coming up 
 now.
 
 There are still some error messages related to CPU initialization, but I 
 was able to install from install-image and boot from hard-disk.
 
 additional failures reported during boot: (all typed in - no copy paste 
 from vga monitor ...)
 
 for all four CPU there is this message:
 acpicpu<n>: autoconfiguration error: failed to add C-state: AE_SUPPORT
 this message comes twice for each CPU before the C1 setup is printed for 
 CPU0 and before the termal-sensor information is printed for the others.
 
 
 acpifan0: autoconfiguration error: failed to initialize
 this is for CPU0 - and there is currently no fan connected ...
 
 ichsmb0 at cpi0 dev 31 function 1: Intel Apollo Lake SMBus (rev. 0x0d)
 pci_intr_map: no mapping for pin A (line=ff)
 cannot set up cpi_intr_handle_t
 ichsmb0: polling
 
 i915drmkms0: notice: Failed to load DMC firmware 
 i915/btx_dmx_ver1_07.bin .Disabling runtime power management.
 i915drmkms0: notice: RC6 and powersaving disabled by BIOS
 the order of these two lines differ between boot from usb-stick and 
 sata-disk ...
 BIOS setup for grafic is default - nothing changed there.
 
 
 So the starting problem is solved now.
 I think this can to into next release.
 
 No idea if the C-state setup problem is serious or not and/or if ther 
 should be new PR for this.
 
 
 To the other thing reported in this one - the setup issues on i386:
 The first one - failed to copy includes in tools compilation - cannot be 
 reprocued anymore. (same system setup, same source tree - simply gone 
 now)
 The compilation of 'release' is still running. In case the 
 sysinstmsgs.fr failure will come up, I will create new PR for that one.
 
 Regards,
 
 Wolfgang
 
 
 
 Am 18.01.2025 18:15, schrieb wgstuken%grimme-reitenspezial.de@localhost via gnats:
 > The following reply was made to PR port-amd64/58982; it has been noted 
 > by GNATS.
 > 
 > From: wgstuken%grimme-reitenspezial.de@localhost
 > To: gnats-bugs%netbsd.org@localhost
 > Cc: martin%duskware.de@localhost
 > Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) failed 
 > to
 >  boot on J3455-ITX board (ASRock)
 > Date: Sat, 18 Jan 2025 16:52:57 +0100
 > 
 >  Yes - will do tomorrow or Monday.
 > 
 >  btw - the build on i386 run again into the problem that sysinstmsgs.fr
 >  was not found -> abort
 >  will try to figure this out too.
 > 
 >  On the amd64 9.3 system the build seems to work. I switched now to 
 > this
 >  (not in really good shape) system for build the patched kernel.
 > 
 >  Regards,
 > 
 >  Wolfgang
 > 
 >  Am 17.01.2025 14:00, schrieb Martin Husemann via gnats:
 >  > The following reply was made to PR port-amd64/58982; it has been 
 > noted
 >  > by GNATS.
 >  >
 >  > From: Martin Husemann <martin%duskware.de@localhost>
 >  > To: gnats-bugs%netbsd.org@localhost
 >  > Cc:
 >  > Subject: Re: port-amd64/58982: NetBSD 10.1 install image (amd64) 
 > failed
 >  > to
 >  >  boot on J3455-ITX board (ASRock)
 >  > Date: Fri, 17 Jan 2025 13:59:03 +0100
 >  >
 >  >  Maybe move this to a different PR, as it is unrelated to the 
 > original
 >  > issue?
 >  >
 >  >  Martin