Re: DS20 confusion

[Martin Husemann <martin%duskware.de@localhost>]

Thanks for the hints, I couldn't get hold of a dual channel qlogic controller,
so I just got another single one and now have the machine up & running.

If anyone happens to have spare RAM modules (very strange format) for these
machines, or CPU cards, i would be interested.

Thanks,

Martin



Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.30 (GENERIC-$Revision: 1.357 $) #1: Fri Jan 24 23:50:37 CET 2014
        
martin%night-owl.duskware.de@localhost:/usr/obj/alpha/usr/src/sys/arch/alpha/compile/GENERIC
AlphaServer DS20 500 MHz, s/n AY94910150
8192 byte page size, 1 processor.
total memory = 1024 MB
(2712 KB reserved for PROM, 1021 MB used by NetBSD)
avail memory = 995 MB
timecounter: Timecounters tick every 0.976 msec
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21264-4
cpu0: Architecture extensions: 0x303<PAT,MVI,FIX,BWX>
tsc0 at mainbus0: 21272 Core Logic Chipset, Cchip rev 0
tsc0: 8 Dchips, 2 memory buses of 32 bytes
tsc0: arrays present: 512MB, 512MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0
pci0 at tsp0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
sio0 at pci0 dev 5 function 0: Contaq Microsystems 82C693 PCI-ISA Bridge (rev. 
0x00)
cypide0 at pci0 dev 5 function 1: Cypress 82C693 IDE Controller (rev. 0x00)
cypide0: bus-master DMA support present
, but unused (registers at unsafe address 0x10200)cypide0: primary channel 
wired to compatibility mode
cypide0: primary channel interrupting at isa irq 14
atabus0 at cypide0 channel 0
cypide1 at pci0 dev 5 function 2: Cypress 82C693 IDE Controller (rev. 0x00)
cypide1: hardware does not support DMA
cypide1: primary channel wired to compatibility mode
cypide1: secondary channel interrupting at isa irq 15
atabus1 at cypide1 channel 0
ohci0 at pci0 dev 5 function 3: Contaq Microsystems 82C693 PCI-ISA Bridge (rev. 
0x00)
ohci0: interrupting at isa irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
isp0 at pci0 dev 8 function 0: QLogic 1020 Fast Wide SCSI HBA
isp0: interrupting at dec 6600 irq 27
isp1 at pci0 dev 9 function 0: QLogic 1020 Fast Wide SCSI HBA
isp1: interrupting at dec 6600 irq 23
isa0 at sio0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
attimer0: attached to pcppi0
tsp1 at tsc0
pci1 at tsp1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
wm0 at pci1 dev 7 function 0: Intel i82543GC 1000BASE-T Ethernet (rev. 0x02)
wm0: interrupting at dec 6600 irq 47
wm0: 64-bit 33MHz PCI bus
wm0: 64 word (6 address bits) MicroWire EEPROM
wm0: Ethernet address 00:03:47:25:42:14
makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
Digital Equipment product 0x0018 (miscellaneous network, revision 0x24) at pci1 
dev 8 function 0 not configured
timecounter: Timecounter "clockinterrupt" frequency 1024 Hz quality 0
timecounter: Timecounter "PCC" frequency 499886640 Hz quality 1000
scsibus0 at isp0: 16 targets, 8 luns per target
scsibus1 at isp1: 16 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
uhub0 at usb0: Contaq Microsystems OHCI root hub, class 9/0, rev 1.00/1.00, 
addr 1
uhub0: 2 ports with 2 removable, self powered
sd0 at scsibus0 target 0 lun 0: <COMPAQ, BB00911CA0, 3B05> disk fixed
sd0: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <COMPAQ, BB00912301, B016> disk fixed
sd1: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd1: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd2 at scsibus0 target 2 lun 0: <COMPAQ, BB00911CA0, 3B05> disk fixed
sd2: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd2: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd3 at scsibus0 target 3 lun 0: <COMPAQ, BB00912301, B016> disk fixed
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
sd3: 8678 MB, 5273 cyl, 20 head, 168 sec, 512 bytes/sect x 17773524 sectors
sd3: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd4 at scsibus0 target 4 lun 0: <DEC, RZ1CB-CS (C) DEC, 0844> disk fixed
sd4: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd4: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
cd0 at scsibus1 target 5 lun 0: <DEC, RRD47   (C) DEC, 1206> cdrom removable
Kernelized RAIDframe activated
sd2: no disk label
raid0: RAID Level 1
raid0: Components: /dev/sd0a /dev/sd1a
raid0: Total Sectors: 17773440 (8678 MB)
root on raid0a dumps on raid0b
root file system type: ffs
cd0: no disk label