Re: Current build of netbsd for rpi is unable to boot

[Joachim Thiemann <joachim.thiemann%gmail.com@localhost>]

On 7 April 2014 14:05, Nick Hudson <skrll%netbsd.org@localhost> wrote:
>>> Can you try latest -current please?
> Clean source please, i.e. latest arm32/param.h

Hi Nick,

it boots without the error loop. No joy on init (but again, I'm
guessing that's a separate issue).  I have included the messages for
what it's worth.

Thanks!
Joachim

---- cut here ---
NetBSD/evbarm (rpi) booting ...
[ Kernel symbol table missing! ]
Loaded initial symtab at 0xc040a4c0, strtab at 0xc044af80, # entries 16539
pmap_postinit: Allocated 35 static L1 descriptor tables
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.99.40 (RPI) #2: Mon Apr  7 14:31:14 CEST 2014
        srcr@virt:/usr/obj/sys/arch/evbarm/compile/RPI
total memory = 448 MB
avail memory = 437 MB
sysctl_createv: sysctl_create(machine_arch) returned 17
mainbus0 (root)
cpu0 at mainbus0 core 0: 700 MHz ARM1176JZ-S r0p7 (ARM11J V6ZK core)
cpu0: DC enabled IC enabled WB enabled LABT
cpu0: 16KB/32B 4-way L1 VIPT Instruction cache
cpu0: 16KB/32B 4-way write-back-locking-C L1 VIPT Data cache
vfp0 at cpu0: VFP11, rounding, exceptions, NaN propagation, denormals
obio0 at mainbus0
bcmicu0 at obio0
bcmmbox0 at obio0: VC mailbox
vcmbox0 at bcmmbox0
bcmtmr0 at obio0 intr 3: VC System Timer
vchiq0 at obio0 intr 66: BCM2835 VCHIQ
bcmpm0 at obio0: Power management, Reset and Watchdog controller
bcmrng0 at obio0: RNG
plcom0 at obio0 intr 57
plcom0: txfifo disabled
plcom0: console
genfb0 at obio0: disabled
sdhc0 at obio0 intr 62: SDHC controller
sdhc0: interrupting on intr 62
sdhc0: SD Host Specification 3.0, rev.153
sdmmc0 at sdhc0 slot 0
dwctwo0 at obio0 intr 9: USB controller
bcmspi0 at obio0 intr 54: SPI
spi0 at bcmspi0: SPI bus
bsciic0 at obio0 intr 53: BSC0
iic0 at bsciic0: I2C bus
bsciic1 at obio0 intr 53: BSC1
iic1 at bsciic1: I2C bus
usb0 at dwctwo0: USB revision 2.0
WARNING: module error: vfs load failed for `usbverbose', error 45
uhub0 at usb0WARNING: module error: vfs load failed for `usbverbose', error 45
: vendor 0x0000 DWC2 root hub, class 9/0, rev 2.00/1.00, addr 1
ld0 at sdmmc0: <0x1c:0x5356:SDC  :0x00:0x12000f54:0x04c>
ld0: 244 MB, 495 cyl, 16 head, 63 sec, 512 bytes/sect x 499712 sectors
ld0: 4-bit width, bus clock 25.000 MHz
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
uhub1 at uhub0 port 1WARNING: module error: vfs load failed for
`usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
: vendor 0x0424 product 0x9512, class 9/0, rev 2.00/2.00, addr 2
uhub1: multiple transaction translators
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
usmsc0 at uhub1 port 1
WARNING: module error: vfs load failed for `usbverbose', error 45
WARNING: module error: vfs load failed for `usbverbose', error 45
usmsc0: vendor 0x0424 product 0xec00, rev 2.00/2.00, addr 3
usmsc0:  Ethernet address b8:27:eb:20:51:a0
ukphy0 at usmsc0 phy 1WARNING: module error: vfs load failed for
`miiverbose', error 45
: OUI 0x00800f, model 0x000c, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
umidi_search_quirk: v=5117, p=4160, i=0
umass0 at uhub1 port 3 configuration 1 interface 0
umass0: Initio MK2006GAL, rev 2.00/1.06, addr 4
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Initio, MK2006GAL, 1.06> disk fixed
sd0: 19073 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 39063024 sectors
boot device: ld0
root on ld0a dumps on ld0b
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying ext2fs...
mountroot: trying ffs...
root file system type: ffs
vchiq: local ver 6 (min 3), remote ver 6.
vcaudio0 at vchiq0: AUDS
WARNING: no TOD clock present
WARNING: using filesystem time
WARNING: CHECK AND RESET THE DATE!
audio0 at vcaudio0: half duplex, playback, capture, independent
warning: no /dev/console
init: copying out path `/sbin/init' 11
exec /sbin/init: error 8
init: copying out path `/sbin/oinit' 12
exec /sbin/oinit: error 2
init: copying out path `/sbin/init.bak' 15
exec /sbin/init.bak: error 8
init: copying out path `/rescue/init' 13
exec /rescue/init: error 8
init path (default /sbin/init):

...and there it stays...
-- 
Joachim Thiemann :: http://jthiem.bitbucket.org ::
http://signalsprocessed.blogspot.com