Re: 2015-03-29-netbsd-odroid_c1.img.gz (Re: NetBSD on ODROID-C1

[Jared McNeill <jmcneill%invisible.ca@localhost>]

Great news! I will try to find a 100Mbps switch and see if I can reproduce 
the issue.

No Amlogic SPI, I2C, or GPIO controller drivers have been written yet. 
Should be pretty easy to do, but I don't have hardware to test them.


On Mon, 30 Mar 2015, Jun Ebihara wrote:

> From: Jared McNeill <jmcneill%invisible.ca@localhost>
> Subject: Re: 2015-03-29-netbsd-odroid_c1.img.gz (Re: NetBSD on ODROID-C1
> Date: Sun, 29 Mar 2015 12:22:36 -0300 (ADT)
>
> > Does "ifconfig awge0" show the correct media info? I only ever tried
> > 1Gbps autoneg. Maybe rgephy needs some more help.
>
> Thanx for your advice.
> So I dig GbE Hub and connect same network
> and get v4/v6 address!
>
> awge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>        address: 00:1e:06:c3:7e:b6
>        media: Ethernet autoselect (1000baseT full-duplex)
>        status: active
>        inet6 fe80::fabb:2fc7:e52a:353%awge0 prefixlen 64 scopeid 0x1
>        inet6 1234:c800:3406:501:12c1:94e9:4967:ffdb prefixlen 64
>        inet 192.168.0.28 netmask 0xffffff00 broadcast 192.168.0.255
>
> > On Sun, 29 Mar 2015, Jun Ebihara wrote:
> > > I've put ODROID-C1 2GB initial test snapshot image to
> > > ftp://ftp.netbsd.org/pub/NetBSD/misc/jun/odroid_c1/2015-03-29-earmv7hf/2015-03-29-netbsd-odroid_c1.img.gz
> > > dmesg:
> > > https://github.com/ebijun/NetBSD/blob/master/odroid-c1/dmesg
> > > 1. dd to 2GB microSD
> > > 2. connect HDMI,Keyboard,mouse,Network
> > > 3. connect power on and NetBSD boot messeage on HDMI display
> > > Sample build script:
> > > https://github.com/ebijun/NetBSD/tree/master/odroid-c1/Image
> > >
> > > Notice:
> > > - I can't get no DHCP address.
>     and can get with GbE.
> > > - mikutter start failed.
> > > - mlterm-fb display |||||||
> > > - icewm start menu seems strange.
>   - what about the SPI/I2C bus and GPIOs? (from fabiodive)
>
> --
> Jun Ebihara