info

["Claudio Leiva S" <cleivas%cox.net@localhost>]

All hds except for one are laptop drives, the other is a Seagate 750 gb and
I use it in my file serve on the qube running 3 hd's, the power supply's
come from old MPC monitors and the output is bigger than a regular cobalt
power supply (4.16a vs. 3.3a from a HP Omnibook models), anyway, both
machines are Qube 2 running NetBSD 4 with Izumi last kernel.

Thanks for your quick answer and sorry for the subject.


NetBSD 4.0_STABLE (GENERIC) #0: Wed Mar 12 21:10:10 JST 2008
 
tsutsui@mirage:/r/work/src-4.0/src/sys/arch/cobalt/compile/obj.cobalt/GENERI
C
Cobalt Qube 2
total memory = 256 MB
avail memory = 246 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
com0 at mainbus0 addr 0x1c800000 level 3: st16650a, working fifo
com0: console
cpu0 at mainbus0: QED RM5200 CPU (0x28a0) Rev. 10.0 with built-in FPU Rev.
10.0
cpu0: 32KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pci0: i/o space, memory space enabled, rd/line, wr/inv ok
pchb0 at pci0 dev 0 function 0: Galileo GT-64111 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21143 Ethernet, pass 4.1
tlp0: interrupting at level 1
tlp0: Ethernet address 00:10:e0:00:f9:fd
lxtphy0 at tlp0 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x02) at
pci0 dev 9 function 2 not configured
pdcide0 at pci0 dev 10 function 0
pdcide0: Promise Ultra100TX2/ATA Bus Master IDE Accelerator (rev. 0x01)
pdcide0: bus-master DMA support present
pdcide0: primary channel configured to native-PCI mode
pdcide0: using irq 9 for native-PCI interrupt
atabus2 at pdcide0 channel 0
pdcide0: secondary channel configured to native-PCI mode
atabus3 at pdcide0 channel 1
tlp1 at pci0 dev 12 function 0: DECchip 21143 Ethernet, pass 4.1
tlp1: interrupting at level 2
tlp1: Ethernet address 00:10:e0:01:06:40
lxtphy1 at tlp1 phy 1: LXT970 10/100 media interface, rev. 3
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mips3_cp0_counter" frequency 125000000 Hz quality
100
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <TOSHIBA MK1017GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9590 MB, 19485 cyl, 16 head, 63 sec, 512 bytes/sect x 19640880 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1: <SAMSUNG HM160JC>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd2 at atabus2 drive 0: <SAMSUNG HM160HC>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3 at atabus2 drive 1: <FUJITSU MHV2080AT PL>
wd3: drive supports 16-sector PIO transfers, LBA addressing
wd3: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488
sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(pdcide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
wd3(pdcide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
pdcide0:0:0: lost interrupt
        type: ata tc_bcount: 0 tc_skip: 0




Claudio Leiva S
Las Vegas, Nevada
USA
http://cleiva.no-ip.com
(Powered by NetBSD for Cobalt)



-----Mensaje original-----
De: port-cobalt-owner%NetBSD.org@localhost 
[mailto:port-cobalt-owner%NetBSD.org@localhost] En
nombre de Izumi Tsutsui
Enviado el: miércoles, 19 de marzo de 2008 5:13
Para: cleivas%cox.net@localhost
CC: port-cobalt%NetBSD.org@localhost; tsutsui%ceres.dti.ne.jp@localhost
Asunto: pdcide (Re: Qube2700)

(please use appropriate subject and don't quote unrelated lines) 

cleivas%cox.net@localhost wrote:

> Hi, I have 2 qubes, 1 with 3 disks and the other with 4, I'm using promise
> ata cards in both machines but when the Qubes boot, at the end I have this
> message on both
> 
> pdcide0:0:0: lost interrupt
>         type: ata tc_bcount: 0 tc_skip: 0
> 
> Can somebody explain why this is happening, is there any way to fix this
> issue???

Providing more info with full dmesg (which includes OS version,
kernel config, exact model etc.) might help, but anyway
I doubt a power supply of Qube has enough capacity to serve
such many hard drives.
---
Izumi Tsutsui


-- 
No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.21.7/1334 - Release Date: 3/18/2008
8:52 PM


No virus found in this incoming message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.21.7/1334 - Release Date: 18/03/2008
20:52
 

No virus found in this outgoing message.
Checked by AVG. 
Version: 7.5.519 / Virus Database: 269.21.7/1334 - Release Date: 18/03/2008
20:52