Re: info

[Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>]

cleivas%cox.net@localhost wrote:

> All hds except for one are laptop drives, the other is a Seagate 750 gb and
> I use it in my file serve on the qube running 3 hd's, the power supply's
> come from old MPC monitors and the output is bigger than a regular cobalt
> power supply (4.16a vs. 3.3a from a HP Omnibook models),

Does it have only 12V and conntected to Qube's conntector?
If so, 5V is still supplied via switching regulators on Qube
and I'm not sure if it's so powerful.
It might be worth to try with only two small drivers.
(one for onboard and another for promise)

FYI, acardide seems working on my Qube2700 with -current kernel.

---
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Fri Jun  5 10:42:59 PDT 1998

 1.LCD Test..............................**NOT FOUND**
 2.Controller Test.........................PASS
 4.Flash Test..............................PASS
 5.Bank 0:.................................16M
 6.Bank 1:.................................16M
 7.Bank 2:.................................16M
 8.Bank 3:.................................16M
 9.Serial Test.............................PASS
10.PCI Expansion Slot....................**Unknown Card**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS

>> NetBSD/cobalt 4.99.55 Bootloader, Revision 0.8 [@0x80f00000]
>> (tsutsui@mirage, Sun Mar 16 18:57:45 JST 2008)
>> Model:               Cobalt Qube 2700
>> Memory:              65536 k
>> PROM boot string:    root=/dev/hda1 ro
Boot [wd0a:netbsd]: -s
Loading: wd0a:netbsd (howto 0x2)
4520976+295616 [225920+217810]=0x504930
Starting at 0x80001000

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.55 (COLT2700) #73: Wed Mar 19 23:59:17 JST 2008
        tsutsui@mirage:/usr/src/sys/arch/cobalt/compile/COLT2700
Cobalt Qube 2700
total memory = 65536 KB
avail memory = 58716 KB
mainbus0 (root)
cpu0 at mainbus0: QED RM5200 CPU (0x2810) Rev. 1.0 with built-in FPU Rev. 1.0
cpu0: 16KB/32B 2-way set-associative L1 Instruction cache, 48 TLB entries
cpu0: 16KB/32B 2-way set-associative write-back L1 Data cache
zsc0 at mainbus0 addr 0x1c800000 irq 4: optional Z85C30 serial port
zstty0 at zsc0 channel 0 (console i/o)
zstty1 at zsc0 channel 1
mcclock0 at mainbus0 addr 0x10000070: mc146818 compatible time-of-day clock
panel0 at mainbus0 addr 0x1f000000
gt0 at mainbus0 addr 0x14000000
pci0 at gt0
pchb0 at pcev 0 function 0: Galileo GT-64011 System Controller, rev 1
tlp0 at pci0 dev 7 function 0: DECchip 21041 Ethernet, pass 2.1
tlp0: interrupting at level 2
tlp0: Ethernet address 00:10:e0:00:09:46
tlp0: 10baseT, 10baseT-FDX, 10base2, 10base5
pcib0 at pci0 dev 9 function 0
pcib0: VIA Technologies VT82C586 PCI-ISA Bridge, rev 39
viaide0 at pci0 dev 9 function 1
viaide0: VIA Technologies VT82C586 (Apollo VP) ATA33 controller
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 9 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x02)
uhci0: can't map i/o space
acardide0 at pci0 dev 10 function 0
acardide0: Acard ATP865-A Ultra133 IDE Controller (rev. 0x07)
acardide0: using irq 9 for native-PCI interrupt
atabus2 at acardide0 channel 0
atabus3 at acardide0 channel 1
wd0 at atabus0 drive 0: <Maxtor 5T020H2>
wd0: 19073 MB, 38752 cyl, 16 head, 63 sec, 512 bytes/sect x 39062500 sectors
wd1 at atabus3 drive 0: <ST380021A>
wd1: 76319 MB, 155061 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
Enter pathname of shell or RETURN for /bin/sh: 
Terminal type? [unknown] 
Terminal type is unknown.
We recommend creating a non-root account and using su(1) for root access.
# dd if=/dev/rwd1d of=/dev/null bs=64k count=1000
1000+0 records in
1000+0 records out
65536000 bytes transferred in 5.391 secs (12156557 bytes/sec)
# 
---
Izumi Tsutsui