Port-evbmips archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Lemote Yeeloong Notebook support
Hi,
I've commited Lemote Yeeloong Notebook support.
Supported devices:
- Realtek 8139 100M LAN (rtk)
- Silicon Motion SM712 (lynxfb, tested console only)
- USB Host Controller (ohci, ehci)
- AMD CS5536 IDE Controller (viaide)
- AMD CS5536 Audio (gcscaudio, tested playback only)
- Keyboard (pckbd)
- Touch pad (pms)
Not Supported devices:
- Realtek RTL8187 WLAN
- KB3310 Embedded controller
dmesg: boot on sd1a(USB memory)
PMON boot command: boot -k /dev/fs/ext2@usb0/netbsd
-----
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.99.3 (LOONGSON) #3: Fri Mar 2 22:05:12 JST 2012
nonaka@koharu.myhome.local:/usr/obj.evbmips/sys/arch/evbmips/compile/LOONGSON
total memory = 1024 MB
avail memory = 1008 MB
timecounter: Timecounters tick every 10.000 msec
mainbus0 (root)
cpu0 at mainbus0: 796.98MHz (hz cycles = 3984900, delay divisor = 398)
cpu0: ICT Loongson 2F CPU (0x6303) Rev. 0.3 with MIPS R4010 FPC Rev. 0.1
cpu0: 64 TLB entries, 1TB (40-bit) VAs, 1TB (40-bit) PAs, 16MB max page size
cpu0: 64KB/32B 4-way set-associative L1 instruction cache
cpu0: 64KB/32B 4-way set-associative write-back L1 data cache
cpu0: 512KB/32B 4-way set-associative write-back L2 unified cache
bonito0 at mainbus0: Memory and PCI-X controller, rev. 1
pci0 at bonito0 bus 0
pci0: i/o space, memory space enabled
rtk0 at pci0 dev 7 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at pci intb
rtk0: Ethernet address 00:23:8b:5f:0a:ac
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
lynxfb0 at pci0 dev 8 function 0: vendor 0x126f product 0x0712 (rev. 0xb0)
lynxfb0: 1024 x 600, 16 bpp, stride 2048
wsdisplay0 at lynxfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
ohci0 at pci0 dev 9 function 0: vendor 0x1033 product 0x0035 (rev. 0x44)
ohci0: interrupting at pci intd
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 9 function 1: vendor 0x1033 product 0x00e0 (rev. 0x05)
ehci0: interrupting at pci intd
ehci0: EHCI version 1.0
ehci0: companion controller, 3 ports each: ohci0
usb1 at ehci0: USB revision 2.0
gcscpcib0 at pci0 dev 14 function 0: vendor 0x1022 product 0x2090 (rev. 0x03)
timecounter: Timecounter "gcscpcib0" frequency 3579545 Hz quality 1000
gcscpcib0: GPIO
gpio0 at gcscpcib0: 32 pins
viaide0 at pci0 dev 14 function 2: AMD CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at isa irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
gcscaudio0 at pci0 dev 14 function 3: AMD Geode CS5536 Audio
gcscaudio0: interrupting at isa irq 9
gcscaudio0: ac97: Avance Logic ALC655 codec; no 3D stereo
gcscaudio0: ac97: ext id 0x9c4<AC97_23,LDAC,SDAC,CDAC,SPDIF>
audio0 at gcscaudio0: full duplex, playback, capture, independent
ohci1 at pci0 dev 14 function 4: vendor 0x1022 product 0x2094 (rev. 0x02)
ohci1: interrupting at isa irq 11
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 14 function 5: vendor 0x1022 product 0x2095 (rev. 0x02)
ehci1: interrupting at isa irq 11
ehci1: EHCI version 1.0
ehci1: companion controller, 4 ports each: ohci1
usb3 at ehci1: USB revision 2.0
isa0 at gcscpcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
mcclock0 at isa0 port 0x70-0x71: mc146818 compatible time-of-day clock
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "mips3_cp0_counter" frequency 398490000 Hz quality 100
wd0 at atabus0 drive 0
uhub0 at usb0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
uhub1 at usb1: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
uhub2 at usb2: vendor 0x1022 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: vendor 0x1022 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 4 ports with 4 removable, self powered
wd0: <FUJITSU MHZ2160BH G2>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 149 GB, 310101 cyl, 16 head, 63 sec, 512 bytes/sect x 312581808 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
ehci1: handing over full speed device on port 1 to ohci1
umass0 at uhub2 port 1 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/58.87, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
umass1 at uhub3 port 3 configuration 1 interface 0
sd0: drive offline
umass1: USB 2.0 USB Flash Drive, rev 2.00/11.00, addr 2
umass1: using SCSI over Bulk-Only
scsibus1 at umass1: 2 targets, 1 lun per target
sd1 at scsibus1 target 0 lun 0: <USB 2.0, USB Flash Drive, 1100> disk removable
sd1: 3824 MB, 7872 cyl, 16 head, 63 sec, 512 bytes/sect x 7831552 sectors
ugen0 at uhub3 port 4
ugen0: vendor 0x0bda RTL8187B_WLAN_Adapter, rev 2.00/2.00, addr 3
boot device: wd0
root on wd0a dumps on wd0b
vfs_mountroot: can't open root device
cannot mount root, error = 6
root device (default wd0a): sd1a
dump device (default sd1b):
file system (default generic):
root on sd1a dumps on sd1b
root file system type: ffs
init path (default /sbin/init):
init: trying /sbin/init
pid 1(init): ABI set to N32 (e_flags=0x20000027)
-----
Regards,
--
NONAKA Kimihiro
Home |
Main Index |
Thread Index |
Old Index