NetBSD on oqo 2

To: port-i386%netbsd.org@localhost
Subject: NetBSD on oqo 2
From: abs%absd.org@localhost
Date: Mon, 16 Jun 2008 15:05:39 +0000 (UTC)

        Visiting a friend with an oqo model 2 http://oqo.com.products/
        (its a 5.6" x 3.3" x 1" palmtop wit Vista) and tested NetBSD.

        4.0 panics when probing acpi and hangs when probing azalia, which
        can be worked around by 'boot -c' and 'disable acpi' and 'disable
        azalia'. current boots fine but fails to probe the ath wireless.

        Sending this now from inside X over its built in wireless ;)
        For anyoue else interested:
                - dmesg from 4.0
                - custom kernel config for 4.0
                - xorg.conf from modular xorg
                - dmesg from current 4.99.64

        Anyone have any thoughts on why current could not probe the
        ath?

--
                           David Brownlee -- abs%absd.org@localhost

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.64 (GENERIC) #0: Sun Jun 15 07:20:44 PDT 2008
        
builds@wb28:/home/builds/ab/HEAD/i386/200806150002Z-obj/home/builds/ab/HEAD/src/sys/arch/i386/compile/GENERIC
total memory = 890 MB
avail memory = 863 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
OQO Inc. OQO Model 02 (No System Version)
mainbus0 (root)
cpu0 at mainbus0 apid 0: IDT/VIA 686-class, 1496MHz, id 0x6a9
cpu0: Enhanced SpeedStep (956 mV) 1500 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1500 1400 1000 800 600 400
ioapic0 at mainbus0 apid 14: pa 0xfec00000, version 3, 24 pins
acpi0 at mainbus0: Intel ACPICA 20080321
acpi0: X/RSDT: OemId <OQO   ,MODEL 02,0fe60019>, AslId <MSFT,0fe60097>
ACPI Error (psargs-0464): [U1B_] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed 
[\_SB_.PCI0.ISA_.URT1._STA] (Node 0xc1df9720), AE_NOT_FOUND
ACPI Exception (evregion-0529): AE_BAD_PARAMETER, Returned by Handler for 
[PCI_Config] [20080321]
ACPI Error (psparse-0627): Method parse/execution failed [\_SB_.PCI0.RNIC._STA] 
(Node 0xc1df9a40), AE_BAD_PARAMETER
ACPI Error (uteval-0306): Method execution failed [\_SB_.PCI0.RNIC._STA] (Node 
0xc1df9a40), AE_BAD_PARAMETER
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Error (psargs-0464): [U1B_] Namespace lookup failure, AE_NOT_FOUND
ACPI Error (psparse-0627): Method parse/execution failed 
[\_SB_.PCI0.ISA_.URT1._STA] (Node 0xc1df9720), AE_NOT_FOUND
ACPI Exception (evregion-0529): AE_BAD_PARAMETER, Returned by Handler for 
[PCI_Config] [20080321]
ACPI Error (psparse-0627): Method parse/execution failed [\_SB_.PCI0.RNIC._STA] 
(Node 0xc1df9a40), AE_BAD_PARAMETER
ACPI Error (uteval-0306): Method execution failed [\_SB_.PCI0.RNIC._STA] (Node 
0xc1df9a40), AE_BAD_PARAMETER
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
SMB0 (PNP0C15) at acpi0 not configured
AMW0 (PNP0C14) at acpi0 not configured
acpibat0 at acpi0 (BAT0, PNP0C0A): ACPI Battery (Control Method)
acpibat0: battery info: (null), 79BAT, 2 123
acpiacad0 at acpi0 (AC, ACPI0003): ACPI AC Adapter
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
attimer1 at acpi0 (PIT, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (FPU, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
pckbc1 at acpi0 (KBC0, PNP0303-224): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, PNP0F13-224): aux port
pckbc2: irq 12
URT1 (PNP0501) at acpi0 not configured
hpet0 at acpi0 (HPET, PNP0103)
hpet0: mem 0x8f000000-0x8f0003ff
timecounter: Timecounter "hpet0" frequency 232830 Hz quality 2000
acpitz0 at acpi0 (TZ0): critical 105.0C hot 100.0C, passive cooling
apm0 at acpi0: Power Management spec V1.2
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0324 (rev. 0x03)
agp0 at pchb0 (v3): aperture at 0xc0000000, size 0x10000000
pchb1 at pci0 dev 0 function 1
pchb1: vendor 0x1106 product 0x1324 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: vendor 0x1106 product 0x2324 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: vendor 0x1106 product 0x3324 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: vendor 0x1106 product 0x4324 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: vendor 0x1106 product 0x7324 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0xb198 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: vendor 0x1106 product 0x3157 (rev. 0x03)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
drm at vga1 not configured
viaide0 at pci0 dev 15 function 0
viaide0: VIA Technologies unknown VIA ATA controller
viaide0: bus-master DMA support present, but unused (couldn't map registers)
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 16 function 0: vendor 0x1106 product 0x3038 (rev. 0x90)
uhci0: interrupting at ioapic0 pin 20
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 16 function 1: vendor 0x1106 product 0x3038 (rev. 0x90)
uhci1: interrupting at ioapic0 pin 22
usb1 at uhci1: USB revision 1.0
uhci2 at pci0 dev 16 function 2: vendor 0x1106 product 0x3038 (rev. 0x90)
uhci2: interrupting at ioapic0 pin 21
usb2 at uhci2: USB revision 1.0
ehci0 at pci0 dev 16 function 4: vendor 0x1106 product 0x3104 (rev. 0x90)
ehci0: interrupting at ioapic0 pin 23
ehci0: dropped intr workaround enabled
ehci0: EHCI version f0.0
ehci0: wrong number of companions (4 != 3)
ehci0: companion controllers, 7 ports each: uhci0 uhci1 uhci2
ehci0: reset timeout
ehci0: init failed, error=13
pcib0 at pci0 dev 17 function 0
pcib0: vendor 0x1106 product 0x8324 (rev. 0x00)
pchb6 at pci0 dev 17 function 7
pchb6: vendor 0x1106 product 0x324e (rev. 0x00)
ppb1 at pci0 dev 19 function 0: vendor 0x1106 product 0x324b (rev. 0x00)
pci2 at ppb1 bus 2
pci2: memory space enabled
azalia0 at pci2 dev 1 function 0: Generic High Definition Audio Controller
azalia0: interrupting at ioapic0 pin 17
azalia0: host: 0x1106/0x3288 (rev. 16), HDA rev. 240.0
ppb2 at pci0 dev 19 function 1: vendor 0x1106 product 0x324a (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ath0 at pci3 dev 4 function 0
ath0: interrupting at ioapic0 pin 17
ath0: unable to attach hardware; HAL status 13
rtk0 at pci3 dev 5 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at ioapic0 pin 18
rtk0: Ethernet address 00:0c:96:40:48:60
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
azalia0: Invalid CORBSZCAP: 0x 0
acpiacad0: AC adapter online.
uhub0 at usb0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ugensa0 at uhub2 port 1
ugensa0: Novatel Wireless Inc. Novatel Wireless EXPD CDMA, rev 1.10/0.00, addr 2
ugensa0: WARNING: This device is marked as untested. Please submit a report via 
send-pr(1).
ugensa0: unexpected endpoint
ucom0 at ugensa0: Generic Serial Device
ubt0 at uhub1 port 1
ubt0: OQO, Inc. OQO Bluetooth 2.0, rev 2.00/19.58, addr 2
wd0 at atabus1 drive 0: <TOSHIBA MK6008GAH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:1:0): using PIO mode 4
Kernelized RAIDframe activated
cmos: attached.
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex
RAIDframe: can't get label for dev md0 (22)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_STABLE (_TIN_) #0: Sun Jun 15 12:37:22 UTC 2008
        root@:/src/sys/arch/i386/compile/_TIN_
total memory = 890 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 865 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xff080
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: VIA C3 (686-class), 1496.15 MHz, id 0x6a9
cpu0: features a7d9bbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features a7d9bbff<PGE,CMOV,PAT,MPC,NOX,MMXX,MMX>
cpu0: features a7d9bbff<FXSR,SSE,SSE2,LONG,3DNOW>
cpu0: features2 181<SSE3,EST,TM2>
cpu0: "VIA Esther processor 1500MHz"
cpu0: I-cache 64 KB 64B/line 4-way, D-cache 64 KB 64B/line 4-way
cpu0: L2 cache 128 KB 64B/line 10-way
cpu0: ITLB 128 4 KB entries 8-way
cpu0: DTLB 128 4 KB entries 8-way
cpu0: using thermal monitor 1
cpu0: Enhanced SpeedStep (956 mV) 1500 MHz
cpu0: Enhanced SpeedStep frequencies available (MHz): 1500 1400 1000 800 600 400
cpu0: 4 page colors
vesabios0 at mainbus0: version 3.0, P 
vesafb0 at vesabios0: VESA frame buffer
vesafb0: fb 800x480x8 @0xa0000000
vesafb0: VBE/PM 1.0 [standby] [suspend] [off]
wsdisplay0 at vesafb0 kbdmux 1: console (fb, vt100 emulation)
wsmux1: connecting to wsdisplay0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x0324 (rev. 0x03)
agp0 at pchb0: aperture at 0xc0000000, size 0xf500000
pchb1 at pci0 dev 0 function 1
pchb1: VIA Technologies product 0x1324 (rev. 0x00)
pchb2 at pci0 dev 0 function 2
pchb2: VIA Technologies product 0x2324 (rev. 0x00)
pchb3 at pci0 dev 0 function 3
pchb3: VIA Technologies product 0x3324 (rev. 0x00)
pchb4 at pci0 dev 0 function 4
pchb4: VIA Technologies product 0x4324 (rev. 0x00)
pchb5 at pci0 dev 0 function 7
pchb5: VIA Technologies product 0x7324 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8377CE CPU-AGP Bridge (rev. 
0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
VIA Technologies product 0x3157 (VGA display, revision 0x03) at pci1 dev 0 
function 0 not configured
pciide0 at pci0 dev 15 function 0
pciide0: VIA Technologies product 0x0581 (rev. 0x00)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to compatibility mode
pciide0: primary channel ignored (not responding; disabled or no drives?)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel interrupting at irq 15
atabus0 at pciide0 channel 1
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 
0x90)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 
0x90)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 
0x90)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4: VIA Technologies VT8237 EHCI USB Controller 
(rev. 0x90)
ehci0: interrupting at irq 5
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA Technologies EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies product 0x8324 (rev. 0x00)
pchb6 at pci0 dev 17 function 7
pchb6: VIA Technologies product 0x324e (rev. 0x00)
ppb1 at pci0 dev 19 function 0: VIA Technologies product 0x324b (rev. 0x00)
pci2 at ppb1 bus 2
pci2: memory space enabled
VIA Technologies VT8237A/VT8251 High Definition Audio Controller (multimedia 
subclass 0x03, revision 0x10) at pci2 dev 1 function 0 not configured
ppb2 at pci0 dev 19 function 1: VIA Technologies product 0x324a (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
ath0 at pci3 dev 4 function 0
ath0: interrupting at irq 10
ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 
36Mbps 48Mbps 54Mbps
ath0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 10.5 phy 6.1 radio 6.3
rtk0 at pci3 dev 5 function 0: Realtek 8139 10/100BaseTX (rev. 0x10)
rtk0: interrupting at irq 9
rtk0: Ethernet address 00:0c:96:40:48:60
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
pcppi0: children must have an explicit unit
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
ubt0 at uhub1 port 1 configuration 1 interface 0
ubt0: OQO, Inc. OQO Bluetooth 2.0, rev 2.00/19.58, addr 2
wd0 at atabus0 drive 0: <TOSHIBA MK6008GAH>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (fb, vt100 emulation)
wsdisplay0: screen 2 added (fb, vt100 emulation)
wsdisplay0: screen 3 added (fb, vt100 emulation)
wsdisplay0: screen 4 added (fb, vt100 emulation)
uhub2: device problem, disabling port 1

include "arch/i386/conf/GENERIC"
no acpi
no ioapic
no azalia

# VESA framebuffer console
options         KVM86                   # required for vesabios
vesabios*       at vesabiosbus?
vesafb*         at vesabios?
options         VESAFB_WIDTH=800
options         VESAFB_HEIGHT=480
options         VESAFB_DEPTH=8
options         VESAFB_PM               # power management support
wsdisplay*      at vesafb? console ?

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/pkg/share/X11/rgb"
        ModulePath   "/usr/pkg/lib/xorg/modules"
        FontPath     "/usr/pkg/lib/X11/fonts/misc/"
        FontPath     "/usr/pkg/lib/X11/fonts/TTF/"
        FontPath     "/usr/pkg/lib/X11/fonts/OTF"
        FontPath     "/usr/pkg/lib/X11/fonts/Type1/"
        FontPath     "/usr/pkg/lib/X11/fonts/100dpi/"
        FontPath     "/usr/pkg/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
        Load  "record"
        Load  "xtrap"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "wsmouse"
        Option      "Device" "/dev/wsmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        Option          "DPMS"
        HorizSync       30-92
        VertRefresh     50-85
        Modeline        "800x480" 40 800 864 928 1088 480 481 484 509 +HSync
EndSection

Section "Device"

        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "DefaultRefresh"            # [<bool>]
        #Option     "ModeSetClearScreen"        # [<bool>]
        Identifier  "Card0"
        Driver      "vesa"
        VendorName  "Unknown Vendor"
        BoardName   "Unknown Board"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
                Modes    "800x480"
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "800x480"
        EndSubSection
EndSection

Follow-Ups:
- Re: NetBSD on oqo 2
  - From: Jared D. McNeill

Prev by Date: Re: Fatal crash on -current
Next by Date: Re: enabling PCI_*_FIXUP in GENERIC
Previous by Thread: Fatal crash on -current
Next by Thread: Re: NetBSD on oqo 2
Indexes:

Home | Main Index | Thread Index | Old Index