Re: NetBSD on DECsystem 5000/240

[Izumi Tsutsui <tsutsui%ceres.dti.ne.jp@localhost>]

> I went through a few versions of the NetBSD installer, below is from
> testing 6.1.5, I got similar results with more recent versions, up to
> 9.3. I can load up 9.3 again if it is of interest.

Just FYI, NetBSD/pmax 9.2 worked on my DECstation 5000/133 (3MIN):
---
lkkbd0: no keyboard
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017,
    2018, 2019, 2020 The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 9.2 (GENERIC) #0: Wed May 12 13:15:55 UTC 2021
	mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/pmax/compile/GENERIC
DECstation 5000/125 (3MIN)
total memory = 98304 KB
avail memory = 91172 KB
timecounter: Timecounters tick every 3.906 msec
Kernelized RAIDframe activated
mainbus0 (root)
cpu0 at mainbus0: MIPS R3000A CPU (0x230) Rev. 3.0 with MIPS R3010 FPC Rev. 3.0
cpu0: 64KB/4B direct-mapped Instruction cache, 64 TLB entries
cpu0: 64KB/4B direct-mapped write-through Data cache
tc0 at mainbus0: 12.5 MHz clock
ioasic0 at tc0 slot 3 offset 0x0
le0 at ioasic0 offset 0xc0000: address 08:00:2b:24:e1:af
le0: 32 receive buffers, 8 transmit buffers
zsc0 at ioasic0 offset 0x100000
vsms0 at zsc0 channel 0
wsmouse0 at vsms0 mux 0
zstty0 at zsc0 channel 1
zsc1 at ioasic0 offset 0x180000
lkkbd0 at zsc1 channel 0
wskbd0 at lkkbd0: console keyboard
zstty1 at zsc1 channel 1
mcclock0 at ioasic0 offset 0x200000: mc146818 or compatible
asc0 at ioasic0 offset 0x300000: NCR53C94, 25MHz, SCSI ID 7
scsibus0 at asc0: 8 targets, 8 luns per target
device PMAF-AA  at tc0 slot 2 offset 0x0 not configured
tfb0 at tc0 slot 1 offset 0x0: 1280x1024, 8,24bpp
wsdisplay0 at tfb0 kbdmux 1
wsmux1: connecting to wsdisplay0
sfb0 at tc0 slot 0 offset 0x0: 1280x1024, 8bpp
wsdisplay1 at sfb0 kbdmux 1: console (std, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay1
timecounter: Timecounter "clockinterrupt" frequency 256 Hz quality 0
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 2 lun 0: <CONNER, CFP1080S, 4040> disk fixed
sd0: 1030 MB, 3658 cyl, 6 head, 96 sec, 512 bytes/sect x 2110812 sectors
sd0: sync (200.00ns offset 15), 8-bit (5.000MB/s) transfers, tagged queueing
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
kern.module.path=/stand/pmax/9.2/modules
---
Izumi Tsutsui