Re: Synology CS 407e: altboot fails to load installer.

[Oscar Molin <oscarmolin%gmail.com@localhost>]

> The install kernel comes with a small memory-based file system, which
> only has a few device nodes. I will fix that immediately and include
> wd1 and sd0.
>
> Thanks for pointing that out! I didn't notice yet, as I never needed
> sd0 or wd1 during installation.

Very good. Leave some room for more devices. I'm hoping to boot from
usb stick at some point if possible.



> BTW, which version of PPCBoot is installed on your CS-407e? I've got:
>  PPCBoot 2.0.0 (Mar  1 2005 - 15:31:41)

mine is dated 2007 but it's 2.0.0 like yours.
I though it had some networking functionality since it supports tftp booting.

> The problem with wd1 and sd0 is explained above. It's just SKnet, which
> behaves strange. What is the version of your PHY?

## Starting application at 0x01000000 ...

>> NetBSD/sandpoint altboot, revision 1.7 (Tue May 10 03:11:27 UTC 2011)
>> Synology DS, cpu 265 MHz, bus 132 MHz, 64MB SDRAM
MAC address 00:11:xxxxx
10Mbps
Hit any key to enter interactive mode: 0
loading "" 5138172+112532=0x502310
entry=0x00090000, ssym=0x00591e90, esym=0x00592310
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 5.99.51 (INSTALL) #0: Tue May 10 03:26:25 UTC 2011
        
builds%b8.netbsd.org@localhost:/home/builds/ab/HEAD/sandpoint/201105092000Z-obj/home/builds/ab/HEAD/src/sys/arch/sandpoint/compile/INSTALL
total memory = 65536 KB
avail memory = 57984 KB
OpenPIC Version 1.2: Supports 1 CPUs and 26 interrupt sources.
mainbus0 (root)
cpu0 at mainbus0: 8245 (Revision 0.4), ID 0 (primary)
cpu0: HID0 0x90c000<DOZE,DPM,ICE,DCE>, powersave: 1
eumb0 at mainbus0
com0 at eumb0 unit 0: ns16550a, working fifo
com0: console
com0: interrupting at irq 40
ociic0 at eumb0
iic0 at ociic0: I2C bus
rs5c372rtc0 at iic0 addr 0x32: RICOH RS5C372[AB] Real-time Clock
satmgr0 at eumb0 unit 1: button manager (synology)
satmgr0: interrupting at irq 41
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1057 product 0x0006 (rev. 0x14)
satalink0 at pci0 dev 12 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink0: using irq 20 for native-PCI interrupt
atabus0 at satalink0 channel 0
atabus1 at satalink0 channel 1
satalink1 at pci0 dev 13 function 0: Silicon Image SATALink 3512 (rev. 0x01)
satalink1: using irq 16 for native-PCI interrupt
atabus2 at satalink1 channel 0
atabus3 at satalink1 channel 1
ohci0 at pci0 dev 14 function 0: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci0: interrupting at irq 17
ohci0: OHCI version 1.0
usb0 at ohci0: USB revision 1.0
ohci1 at pci0 dev 14 function 1: vendor 0x1033 product 0x0035 (rev. 0x43)
ohci1: interrupting at irq 17
ohci1: OHCI version 1.0
usb1 at ohci1: USB revision 1.0
ehci0 at pci0 dev 14 function 2: vendor 0x1033 product 0x00e0 (rev. 0x04)
ehci0: interrupting at irq 17
ehci0: companion controllers, 3 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
skc0 at pci0 dev 15 function 0: irq 18
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:11:xxxxx
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5  <<-- looks
the same as yours
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
biomask 8000078 netmask 8000078 ttymask 8000078
satalink0: port 0: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0
wd0: <SAMSUNG SP2504C>
wd0: 232 GB, 484521 cyl, 16 head, 63 sec, 512 bytes/sect x 488397168 sectors
uhub0 at usb0: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1 at usb1: vendor 0x1033 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2 at usb2: vendor 0x1033 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
boot device: sk0
root on md0a dumps on md0b
root file system type: ffs
erase ^H, werase ^W, kill ^U, intr ^C, status ^T


^^
It looks pretty much like yours