...dos that mean..

[Holm Tiffe <holm%freibergnet.de@localhost>]

Holm Tiffe wrote:

[..]> 
> Ok, in the meantime I've installed NetBSD on an other disk (RZ29L aka
> ST34171) as sd0, this is successfully booting and is running as expected.
> 
> I've removed the boot with intallboot -c from sd1 with the runnings system
> from sd0, copied the sd0 /boot to sd1 and made a new installboot -v
> /dev/rsd1c /usr/mdec/sdboot.
> I get the same as before:
> 
> 
> >>> sh dev
> 
>   VMS/VMB      ADDR      DEVTYPE    NUMBYTES     RM/FX    WP    DEVNAM
> REV
>   -------      ----      -------    --------     -----    --    ------
> ---
>   EZA0         08-00-2B-3C-1C-DB
>   DKA0         A/0/0     DISK         4.29GB      FX            RZ29L-A 0814
>   DKA100       A/1/0     DISK         4.22GB      FX            DCAS-34 S63A
>  ..HostID..    A/6       INITR
> 
> 
> 
> >>> b dka100
> 
>  
> ?06 HLT INST
>   PC= 00002AC0 PSL= 041F0000
> 
> >>> 
> 
> 
> 
> ...but I tried dka1, then it boots from sd1 but is asking fro the root and
> the swap device:
> ...
> asc0 at vsbus0 csr 0x26000080 vec 510 ipl 17 maskbit 1
> asc0: NCR53C94, 25MHz, SCSI ID 6
> scsibus0 at asc0: 8 targets, 8 luns per target
> spx0 at vsbus0 csr 0x38000000 vec 514 ipl 15 maskbit 2
> spx0: Using QVSS 8x15 font
> spx0: RAMDAC ID: 0x4a, Bt459 (SPX/LCSPX) RAMDAC type
> wsdisplay0 at spx0 kbdmux 1
> scsibus0: waiting 2 seconds for devices to settle...
> sd0 at scsibus0 target 0 lun 0: <DEC, RZ29L-AS (C) DEC, 0814> disk fixed
> sd0: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
> sd0: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged
> queueing
> sd1 at scsibus0 target 1 lun 0: <IBM, DCAS-34330, S63A> disk fixed
> sd1: 4028 MB, 8205 cyl, 6 head, 167 sec, 512 bytes/sect x 8250001 sectors
> sd1: sync (160.00ns offset 15), 8-bit (6.250MB/s) transfers, tagged
> queueing
> boot device: <unknown>
> root device: sd1a
> dump device (default sd1b): 
> file system (default generic): ffs
> root on sd1a dumps on sd1b
> init path (default /sbin/init): 
> init: trying /sbin/init
> Enter pathname of shell or RETURN for /bin/sh: 
> We recommend that you create a non-root account and use su(1) for root
> access.
> # 
> 
> 
> Ehem...please don't call me an Idiot, but what is going on here? Why can't
> I boot from dka100 and why it boots from dka1?
> 
> 
> Regards,
> 
> Holm
> -- 



...that nobody knows what's going on here?
...or ist the question to stupid?

Regards,

Holm
-- 
      Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, 
     Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
  www.tsht.de, info%tsht.de@localhost, Fax +49 3731 74200, Mobil: 0172 8790 741