Re: CMD MSCP SCSI problems? (again?)

[Dave McGuire <mcguire%neurotica.com@localhost>]

On 2/1/23 13:59, Anders Magnusson wrote:
> Do the kernel have the correct csr address for the MSCP card?  Which 
> address do the card have?
> Can you post the dmesg output for both the install kernel and the 
> non-working kernel?

  Annnnnd after another attempt (just for the heck of it, while working 
on the 9-track drive under VMS), it boots correctly from the new system 
disk.  Something is marginal somewhere.

              -Dave

-------------------

[   1.0000000] NetBSD 9.3 (GENERIC) #0: Thu Aug  4 15:30:37 UTC 2022 

[   1.0000000] 
mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/vax/compile/GENERIC
[   1.0000000] VAX 4000/705A 

[   1.0000000] total memory = 127 MB 

[   1.0000000] avail memory = 119 MB 

[   1.0000000] mainbus0 (root) 

[   1.0000000] cpu0 at mainbus0KA694, NVAX (ucode rev 2) 

[   1.0000000] ze0 at mainbus0 

[   1.0000000] ze0: hardware address 08:00:2b:99:8c:14 

[   1.0000000] shac at mainbus0 not configured 

[   1.0000000] uba0 at mainbus0: Q22 

[   1.0000000] uda0 at uba0 csr 172150 vec 774 ipl 17 

[   1.0000000] mscpbus0 at uda0: version 6 model 13 

[   1.0000000] mscpbus0: DMA burst size set to 4 

[   1.0000000] mscpbus0: couldn't attach drive (no free items) 

[   1.0000000] mscpbus0: couldn't attach drive (no free items) 

[   1.0000080] ra0 at mscpbus0 drive 0: RA90 

[   1.0197090] ra1 at mscpbus0 drive 1: RA90 

[   1.0426490] ra2 at mscpbus0 drive 2: RA81 

[   1.0712230] ra3 at mscpbus0 drive 3: RA90 

[   1.1896930] ra0: no disk label: size 3920489 sectors 

[   1.2296920] ra1: size 3920489 sectors 

[   1.2796920] ra2: no disk label: size 669391 sectors 

[   1.3296920] ra3: no disk label: size 3920489 sectors 

[   1.3796920] WARNING: 2 errors while detecting hardware; check system 
log.
[   1.3986860] boot device: ra1 

[   1.4069790] root on ra1a dumps on ra1b 

[   1.4496930] root file system type: ffs 



--
Dave McGuire, AK4HZ
New Kensington, PA