Re: CMD MSCP SCSI problems? (again?)

[Dave McGuire <mcguire%neurotica.com@localhost>]

  Wow, I've not compiled a NetBSD kernel in a very long time, that'll 
be fun. :-)  I'll see if I can get to that this week.  I suppose I'll 
have to do an install under simh to get to that point.

             -Dave

On 2/2/23 03:59, Anders Magnusson wrote:
> I think it might be time to complete the initialization of the device.
> It's just a loop and estimate that the machine does 24 vups.
>
> You may increase this number in ka680.c in  struct cpu_dep to something 
> higher and recompile the kernel.
> This number may be a little too small for this fast machine :-)
>
> -- R
>
> Den 2023-02-01 kl. 22:46, skrev Dave McGuire:
> > On 2/1/23 13:59, Anders Magnusson wrote:
> > > Do the kernel have the correct csr address for the MSCP card?  Which 
> > > address do the card have?
> > > Can you post the dmesg output for both the install kernel and the 
> > > non-working kernel?
> >
> >   Annnnnd after another attempt (just for the heck of it, while 
> > working on the 9-track drive under VMS), it boots correctly from the 
> > new system disk.  Something is marginal somewhere.
> >
> >               -Dave
> >
> > -------------------
> >
> > [   1.0000000] NetBSD 9.3 (GENERIC) #0: Thu Aug  4 15:30:37 UTC 2022
> > [   1.0000000] 
> > mkrepro%mkrepro.NetBSD.org@localhost:/usr/src/sys/arch/vax/compile/GENERIC
> > [   1.0000000] VAX 4000/705A
> > [   1.0000000] total memory = 127 MB
> > [   1.0000000] avail memory = 119 MB
> > [   1.0000000] mainbus0 (root)
> > [   1.0000000] cpu0 at mainbus0KA694, NVAX (ucode rev 2)
> > [   1.0000000] ze0 at mainbus0
> > [   1.0000000] ze0: hardware address 08:00:2b:99:8c:14
> > [   1.0000000] shac at mainbus0 not configured
> > [   1.0000000] uba0 at mainbus0: Q22
> > [   1.0000000] uda0 at uba0 csr 172150 vec 774 ipl 17
> > [   1.0000000] mscpbus0 at uda0: version 6 model 13
> > [   1.0000000] mscpbus0: DMA burst size set to 4
> > [   1.0000000] mscpbus0: couldn't attach drive (no free items)
> > [   1.0000000] mscpbus0: couldn't attach drive (no free items)
> > [   1.0000080] ra0 at mscpbus0 drive 0: RA90
> > [   1.0197090] ra1 at mscpbus0 drive 1: RA90
> > [   1.0426490] ra2 at mscpbus0 drive 2: RA81
> > [   1.0712230] ra3 at mscpbus0 drive 3: RA90
> > [   1.1896930] ra0: no disk label: size 3920489 sectors
> > [   1.2296920] ra1: size 3920489 sectors
> > [   1.2796920] ra2: no disk label: size 669391 sectors
> > [   1.3296920] ra3: no disk label: size 3920489 sectors
> > [   1.3796920] WARNING: 2 errors while detecting hardware; check 
> > system log.
> > [   1.3986860] boot device: ra1
> > [   1.4069790] root on ra1a dumps on ra1b
> > [   1.4496930] root file system type: ffs

--
Dave McGuire, AK4HZ
New Kensington, PA