Hi,
after using NetBSD 3.1.1 on this VAX 4000/200, I just thought it
would be about time to do a plain reinstall using some cdrom with
NetBSD 10.0 RC5, but at boot it couldn't "find any uba devices":
>>>init
>>>boot dua0
>> NetBSD/vax boot [1.12 (Tue Feb 27 05:27:39 UTC 2024)] <<
>> Press any key to abort autoboot 0
getdisklabel: no disk label
nfs_open: must mount first.
open netbsd.vax: No such file or directory
> boot netbsd
getdisklabel: no disk label
nfs_open: must mount first.
3557656+185792 [249504+235927]=0x408b20
[ 1.0000000] Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001,
2002, 2003,
[ 1.0000000] 2009, 2010, 2011, 2012, 2013,
[ 1.0000000] 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022,
2023,
[ 1.0000000] 2024
[ 1.0000000] The NetBSD Foundation, Inc. All rights reserved.
[ 1.0000000] Copyright (c) 1982, 1986, 1989, 1991, 1993
[ 1.0000000] The Regents of the University of California. All
rights reserved.
[ 1.0000000] NetBSD 10.0_RC5 (GENERIC) #0: Tue Feb 27 05:27:39 UTC
2024
[ 1.00000/usr/src/sys/arch/vax/compile/GENERIC
[ 1.0000000] VAX 4000/200
[ 1.0000000] total memory = 40896 KB
[ 1.0000000] avail memory = 34952 KB
[ 1.0000000] mainbus0 (root)
[ 1.0000000] cpu0 at mainbus0: KA660, SOC (ucode rev. 6), 6KB L1 cache
[ 1.0000000] ze0 at mainbus0
[ 1.0000000] ze0: hardware address 08:00:2b:26:58:fc
[ 1.0000000] shac at mainbus0 not configured
[ 1.0000000] uba0 at mainbus0: Q22
[ 1.0600040] WARNING: system needs entropy for security; see
entropy(7)
[ 2.1700040] swwdog0: software watchdog initialized
[ 2.1800040] boot device: <unknown>
[ 2.1900040] root device:
[ 2.2300040] use one of: ze0 ddb halt reboot
[ 2.2600040] root device: ^G[A^G^H^Huda0
[ 2.4200040] use one of: ze0 ddb halt reboot
[ 2.4500040] root device: uba0
[ 2.4900040] dump device:
[ 2.5100040] file system (default generic):
[ 2.5300040] can't determine root device
[ 2.5400040] root device:
Using NetBSD 3.1.1 dmesg has been:
NetBSD 3.1.1 (GENERIC) #0: Thu Jul 12 15:39:27 CEST 2007
builds%lori.ghen.be@localhost:/home/builds/netbsd-3-1-1-RELEASE/sys/arch/vax/compile/GENERIC
VAX 4000/200
cpu0: KA660, microcode Rev. 6
total memory = 40896 KB
avail memory = 36840 KB
mainbus0 (root)
ibus0 at mainbus0
ze0 at ibus0
ze0: hardware address 08:00:2b:26:58:fc
device shac at ibus0 not configured
uba0 at ibus0: Q22
uda0 at uba0 csr 172150 vec 774 ipl 17
mscpbus0 at uda0: version 6 model 13
mscpbus0: DMA burst size set to 4
ra0 at mscpbus0 drive 0: RRD40
ra1 at mscpbus0 drive 1: RA90
Kernelized RAIDframe activated
ra0: no disk label: size 871128 sectors
ra1: size 2201599 sectors
boot device: ra1
root on ra1a dumps on ra1b
root file system type: ffs
TODR stopped - CHECK AND RESET THE DATE.
Any advice whats going wrong?
Greetings Robert
PS: My first mail on ports-vax%netbsd.org@localhost
<mailto:ports-vax%netbsd.org@localhost> ;)