Source-Changes-HG archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
[src/trunk]: src/sys/arch/mips/mips Make sure KX/UX stay on in 64-bit kernels...
details: https://anonhg.NetBSD.org/src/rev/16ad487fd1d3
branches: trunk
changeset: 338714:16ad487fd1d3
user: matt <matt%NetBSD.org@localhost>
date: Fri Jun 05 16:16:18 2015 +0000
description:
Make sure KX/UX stay on in 64-bit kernels so deferencing the lwp to get
the cpu_info doesn't cause a fault.
diffstat:
sys/arch/mips/mips/spl.S | 19 +++++++++++++++++--
1 files changed, 17 insertions(+), 2 deletions(-)
diffs (57 lines):
diff -r 66c27521a3e4 -r 16ad487fd1d3 sys/arch/mips/mips/spl.S
--- a/sys/arch/mips/mips/spl.S Fri Jun 05 16:01:55 2015 +0000
+++ b/sys/arch/mips/mips/spl.S Fri Jun 05 16:16:18 2015 +0000
@@ -1,4 +1,4 @@
-/* $NetBSD: spl.S,v 1.5 2011/04/06 05:48:35 matt Exp $ */
+/* $NetBSD: spl.S,v 1.6 2015/06/05 16:16:18 matt Exp $ */
/*-
* Copyright (c) 2009, 2010 The NetBSD Foundation, Inc.
@@ -38,7 +38,7 @@
#include <mips/asm.h>
#include <mips/cpuregs.h>
-RCSID("$NetBSD: spl.S,v 1.5 2011/04/06 05:48:35 matt Exp $")
+RCSID("$NetBSD: spl.S,v 1.6 2015/06/05 16:16:18 matt Exp $")
#include "assym.h"
@@ -86,7 +86,12 @@
or v1, MIPS_INT_MASK # enable all interrupts
xor a0, v1 # disable ipl's masked bits
DYNAMIC_STATUS_MASK(a0,v0) # machine dependent masking
+#ifdef _LP64
+ li v1, MIPS3_SR_KX | MIPS3_SR_UX # keep 64-bit addressing on
+ mtc0 v1, MIPS_COP_0_STATUS ## disable interrupts
+#else
mtc0 zero, MIPS_COP_0_STATUS ## disable interrupts
+#endif
COP0_SYNC
#ifdef MULTIPROCESSOR
PTR_L a3, L_CPU(MIPS_CURLWP) ## make sure curcpu is correct
@@ -138,7 +143,12 @@
or v1, MIPS_INT_MASK # set all INT bits
xor v1, a1 # clear any bits for this IPL
DYNAMIC_STATUS_MASK(v1,t0) # machine dependent masking
+#ifdef _LP64
+ li v1, MIPS3_SR_KX | MIPS3_SR_UX # keep 64-bit addressing on
+ mtc0 v1, MIPS_COP_0_STATUS ## disable interrupts
+#else
mtc0 zero, MIPS_COP_0_STATUS ## disable interrupts
+#endif
COP0_SYNC
INT_S a0, CPU_INFO_CPL(a3) ## save IPL in cpu_info (KSEG0)
mtc0 v1, MIPS_COP_0_STATUS ## store back
@@ -173,7 +183,12 @@
NOP_L # load delay
or v0, a0, v1
DYNAMIC_STATUS_MASK(v0,t0) # machine dependent masking
+#ifdef _LP64
+ li v1, MIPS3_SR_KX | MIPS3_SR_UX # keep 64-bit addressing on
+ mtc0 v1, MIPS_COP_0_STATUS ## disable interrupts
+#else
mtc0 zero, MIPS_COP_0_STATUS ## disable interrupts
+#endif
COP0_SYNC
#if IPL_NONE == 0
INT_S zero, CPU_INFO_CPL(a3) ## set ipl to 0
Home |
Main Index |
Thread Index |
Old Index