Re: dual stack hostside IPv6 config

["Niels Dettenbach (Syndicat IT & Internet)" <nd%syndicat.com@localhost>]

>On Fri, Mar 13, 2015 at 02:59:09PM +0100, Niels Dettenbach wrote:
>> Does this mean that i should avoid any rc.conf ifconfig_ line and
>only use 
>> /etc/ifconfig.netdev0 ?
>> 
>> And anybody know where i can configure the "second" gateway for IPv6
>(if not 
>> by hand in any own script)?
>> 
>> For IPv4 i have in rc.conf:
>> 	defaultroute="9.8.7.6"
>

>
>Martin

Am 13. März 2015 15:33:45 MEZ, schrieb Martin Husemann <martin%duskware.de@localhost>:
>You can do something like:
>
>ip6mode=host
>ifconfig_bge0="inet 192.168.1.15; inet6 2001::226:2dff:fe90:46d"
>defaultroute="9.8.7.6"
>defaultroute6="2001::1"
ah, ok,
this seems to fit my needs so far. Will try both variants on a nonproductive machine.

>(the defaultroute6 might need a % specification if link local, like:
>"fe80::226:2dff:fe90:46d1%bge0")
i think not,
it is a "dry" network with a gateway on LAN in the same address segment 2001::xxx:1 and it seems there is no autoconfig, routing nor dhcp service on the net, so static handwork is to do here.

But regarding an autoconfig service i think about offering any kind of a autoconfig service for inet6 in that LAN on a machine which is not the router/gateway (no access to the gw machine) - but i'm new into 6 att and have to further read / experiment with it.


many thanks to you both,


Niels.
-- 
Niels Dettenbach
Syndicat IT & Internet
http://www.syndicat.com