Re: NetBSD hardclock overhead growth

["Michael L. Hitch" <mhitch%NetBSD.org@localhost>]

On Thu, 27 Aug 2015, Felix Deichmann wrote:

> It's also easy to obtain this info from the console (see below).

  I figured there should be a way to do that.

> > > > e pr$_ccr
>  I 00000025 00000014

  I couldn't remember how to modify/examine the registers.  Thanks, now I 
can check my other VLC.

> The KA48 System Board Specification says that you can write all bank enable 
> bits, but reading them back will only yield the factory-enabled ("lasar 
> [sic!] fused") ones set to 1.
> On the KA660, it seems this is not the case (also implied by the statement 
> that the firmware writes the bank enable bits).

  I'll try this on my second VLC, which showed one bank missing.

Mike

---
Michael L. Hitch                        mhitch%montana.edu@localhost
Operations Consulting,  Information Technology Center
Montana State University, Bozeman, MT     USA