Source-Changes-D archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index][Old Index]
Re: CVS commit: src/sys/dev/pci
On Wed, 29 Aug 2012, Manuel Bouyer wrote:
Module Name: src
Committed By: bouyer
Date: Wed Aug 29 20:39:24 UTC 2012
Modified Files:
src/sys/dev/pci: if_wm.c if_wmreg.h
Log Message:
Make vlan and all ip/ip6 checksum offload work for the I350.
On newer devices, when using the legacy TX descriptors, vlan-related flags
that were set on the last descriptor of a packet have to be set on the
first one.
For tso/checksum offloads, a new "advanced" descriptor format has to be
used.
<snip>
Tested on a I350, and a i80003 (which use the old format), both with and
without vlans, with and without checksum offloads.
Is there an easy way to identify which wm I have? Does the following
device need this commit in order to use offload? Or will this one work
with an earlier rev of the driver?
# dmesg | grep wm
wm0 at pci2 dev 0 function 0: Intel i82574L (rev. 0x00)
wm0: interrupting at ioapic1 pin 24
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address bc:ae:c5:30:d9:8a
ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x000b, rev. 1
-------------------------------------------------------------------------
| Paul Goyette | PGP Key fingerprint: | E-mail addresses: |
| Customer Service | FA29 0E3B 35AF E8AE 6651 | paul at whooppee.com |
| Network Engineer | 0786 F758 55DE 53BA 7731 | pgoyette at juniper.net |
| Kernel Developer | | pgoyette at netbsd.org |
-------------------------------------------------------------------------
Home |
Main Index |
Thread Index |
Old Index